How to Drive on Snowy and Icy Roads?

1 Answers
Rodney
07/29/25 11:40pm
To drive safely on snowy and icy roads, follow these guidelines: 1. Straight-line driving: (1) Maintain sufficient following distance, generally at least double the normal distance. (2) Keep a steady speed, avoiding sudden acceleration or deceleration. (3) Avoid overtaking unless absolutely confident. 2. Turning: Reduce speed to a minimum before entering a turn, steer slowly and gently. Take wide turns, avoiding sharp turns. 3. Driving on slopes: Before ascending, slightly increase speed to gain momentum. Do not accelerate on the slope; maintain a steady speed until reaching the top. Before descending, reduce speed to the minimum possible and descend at a steady pace without braking. Never shift to neutral. 4. Snow chain usage: When snow accumulation exceeds 10 cm, snow chains must be installed on the drive wheels. For snow less than 10 cm deep, avoid using chains as they can damage tires and create significant vibration and noise.
Was this review help?
13
3
Share
More Forum Discussions

Where is the crankshaft position sensor located on the Wuling Zhiguang?

The crankshaft position sensor on the Wuling Zhiguang is located at the junction of the cylinder block and the transmission. The function of the crankshaft position sensor is to determine the position of the crankshaft, specifically its rotation angle. It typically works in conjunction with the camshaft position sensor to determine the basic ignition timing. The Wuling Zhiguang is a microvan with body dimensions of 3797 mm in length, 1510 mm in width, and 1820 mm in height, a wheelbase of 2500 mm, and a fuel tank capacity of 38 liters. It is equipped with a 1.2L inline 4-cylinder naturally aspirated engine, delivering a maximum power of 56 kW at 5600 rpm, a maximum torque of 108 Nm between 3600 and 4200 rpm, and a maximum horsepower of 76 PS.
20
5
Share

Is it safe to drive with a tire pressure of 1.9 bar?

Tire pressure of 1.9 bar is not recommended for driving. The standard tire pressure generally ranges between 2.3 to 2.5 bar. Hazards of low tire pressure: 1. Increased friction coefficient with the road surface, leading to higher fuel consumption; 2. Causes the steering wheel to feel heavy and prone to deviation, compromising driving safety; 3. Increases tire movement, resulting in abnormal heat generation; 4. Reduces the functionality of the cord and rubber; 5. Increases friction between the tire and the ground, causing a rapid rise in tire temperature and softening of the tire; 6. Increases the risk of tire blowout during high-speed driving; 7. Increases tire body deformation, making the tire sidewalls more prone to cracks; 8. Expands the tire's contact area with the ground, accelerating shoulder wear; 9. Weakens braking performance.
12
2
Share

Where does the license plate 'Zhe K' belong to?

Zhe K is the license plate code for Lishui City in Zhejiang Province. The license plate codes for Zhejiang Province are as follows: Zhe A represents Hangzhou, Zhe B represents Ningbo, Zhe C represents Wenzhou, Zhe D represents Shaoxing, Zhe E represents Huzhou, Zhe F represents Jiaxing, Zhe G represents Jinhua, Zhe H represents Quzhou, Zhe J represents Taizhou, Zhe K represents Lishui, and Zhe L represents Zhoushan. License plates, also known as vehicle registration plates, are plates affixed to the front and rear of a vehicle. They are made of materials such as aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. The first character on the license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered, and the second character is an English letter representing the prefecture-level administrative region where the vehicle is registered.
8
3
Share

Why can't the rear door of the Wuling Hongguang S be opened?

Reasons why the rear door of the Wuling Hongguang S cannot be opened: 1. The child safety lock is engaged, causing the child lock on the rear door to activate; 2. The door lock is broken. The Wuling Hongguang S is a compact MPV with exterior dimensions of 4420 mm in length, 1685 mm in width, and 1755 mm in height, a wheelbase of 2720 mm, a fuel tank capacity of 50 liters, and a curb weight of 1206 kg. The Wuling Hongguang S is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 105 hp, a maximum power of 77 kW, a maximum torque of 147 Nm, and a maximum torque speed range of 3600 to 4400 rpm, paired with a 5-speed manual transmission.
5
4
Share

What are the five features of Tesla cars?

The five features of Tesla cars are as follows: 1. Powerful performance: The entry-level Model S Long Range accelerates from 0-100 km/h in 3.2 seconds, while the Plaid version achieves this in just 2.1 seconds. 2. Unique steering wheel design: The traditional circular steering wheel has been replaced with a rectangular, flat-bottomed steering wheel commonly used in F1 and other racing cars. 3. Equipped with true automatic transmission: The new Model S Plaid features a true automatic transmission, which Tesla calls Auto-Shift. When the driver enters the car and presses the brake, the vehicle automatically determines the driver's intention to move. If there is an obstacle behind, it shifts into drive; if there is an obstacle in front, it shifts into reverse, showcasing high intelligence. 4. Capable of playing AAA games: The central control screen has been changed from a vertical to a horizontal orientation, with a size of 17 inches. A slightly smaller screen is also installed in the rear center for passenger entertainment. 5. Includes autonomous driving suite: The new Model S still uses the autonomous driving computer Hardware-3. This computer features two Tesla-developed chips, each with a computing power of 72 TOPS.
4
0
Share

How Long Does It Take to Evacuate a Car's Vacuum?

Evacuating a car's vacuum typically takes more than 30 minutes. Evacuation refers to the process of removing air from the car's air conditioning pipelines, while also drying out any water vapor present in the pipelines. Since the refrigerant in the air conditioning system is highly sensitive to moisture, the presence of air and water in the pipelines can lead to insufficient cooling or no cooling at all, affecting the comfort of passengers during summer. Therefore, to ensure the system operates correctly, evacuation must be performed before refilling the refrigerant. Here is some related information: Purpose of evacuation: The evacuation of a car's air conditioning system aims to remove air and moisture from the refrigeration system, which is a crucial step in air conditioning maintenance. During repairs or component replacements, air can enter the system, carrying a certain amount of water vapor. Evacuation does not directly remove water from the refrigeration system but instead creates a vacuum that lowers the boiling point of water, allowing it to vaporize and be extracted as steam. Method for evacuating a car's air conditioning system: Connect the refrigeration system, manifold gauge, and vacuum pump. Set the compressor's high and low service valves to a slightly open position, and ensure the high and low-pressure manual valves on the manifold gauge are closed. Remove the protective covers from the vacuum pump's suction and exhaust ports, then connect the manifold gauge's center hose to the vacuum pump's inlet and outlet.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.