How to Drive on a 2-Lane Highway?

Does Model Y Need to Pay Purchase Tax?

The Ministry of Industry and Information Technology released the 12th batch of new energy vehicle promotion and application recommended models catalog in 2020, which includes the domestically produced Tesla Model Y. Therefore, the Model Y will be exempt from purchase tax. The Model Y is positioned as a mid-size SUV, available in Long Range and Performance versions, with optional 5-seat and 7-seat layouts. In terms of power, both the Long Range and Performance versions are equipped with dual motors (all-wheel drive), with a maximum range of 505/480 kilometers and 0-100 km/h acceleration times of 5.1/3.7 seconds, respectively. Tesla is an American electric vehicle and energy company with a market value of $210 billion, producing and selling electric vehicles, solar panels, and energy storage equipment. Headquartered in Palo Alto, it was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning. The founders named the company "Tesla Motors" in honor of physicist Nikola Tesla.

18

5

Share

Is it possible to change lanes to either the left or the right?

Change lanes to the left under reasonable circumstances. In actual driving situations, it is permissible to change lanes to either the left or the right. Below is an introduction to Subject 3: 1. Introduction: Subject 3 is part of the motor vehicle driver's license examination, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. Content: Includes pre-driving preparations, simulated lighting tests, starting, driving straight, gear shifting operations, lane changing, pulling over, passing through intersections straight, turning at intersections, meeting vehicles, overtaking, making U-turns, night driving, etc. The test content varies depending on the type of vehicle license. 3. Knowledge: Safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge, etc.

7

0

Share

What to Do When the Car Alternator Is Not Generating Electricity?

There are many reasons why a car alternator may not generate electricity, and solutions can be tailored based on the specific cause: Causes and Solutions: If the alternator belt is broken or slipping, tighten the adjustment device or replace the belt. If there is an open circuit in the alternator output wire, check the condition of the wire and repair it if necessary. If the rotor part is stuck, manually test whether it rotates smoothly. If the coil is damaged, use a multimeter to measure the coil resistance to see if it is normal. If there is no resistance value, the coil must be rewound or the motor replaced. Testing Methods for a Non-Generating Car Alternator: Multimeter Voltage Test: Set the multimeter to the 30V DC voltage range. Connect the red probe to the alternator's "armature" terminal and the black probe to the casing. Run the engine at medium speed or higher. For a 12V electrical system, the standard voltage should be around 14V, and for a 24V electrical system, it should be around 28V. If the measured voltage matches the battery voltage, the alternator is not generating electricity. External Ammeter Test: If the car dashboard does not have an ammeter, an external DC ammeter can be used for testing. First, disconnect the wire from the alternator's "armature" terminal. Then, connect the positive terminal of a DC ammeter (with a range of about 20A) to the alternator's "armature" and the negative terminal to the disconnected wire. When the engine runs at medium speed or higher, a charging indication of 3A to 5A on the ammeter means the alternator is working normally; otherwise, it is not generating electricity. Test Lamp Method: If a multimeter or DC ammeter is not available, a car bulb can be used as a test lamp. Solder wires of appropriate length to both ends of the bulb and attach alligator clips to the ends. Before testing, disconnect the wire from the alternator's "armature" terminal. Clip one end of the test lamp to the alternator's "armature" terminal and the other end to the ground. If the bulb lights up when the engine runs at medium speed, the alternator is working normally; otherwise, it is not generating electricity.

11

4

Share

What to Do When Driving Through Deep Water

When driving through deep water, try not to stop, accelerate, shift gears, or release the throttle. When driving through relatively deep water, engage a low gear, usually second gear, and maintain a steady throttle to pass through slowly. If the water level is higher than the air intake, the engine may suck in water, causing it to stall. If the engine stalls due to water intake, do not attempt to restart it, as this can lead to severe engine damage. Even if you have purchased flood insurance, the insurance company will not cover damages caused by restarting the engine, so drivers must be cautious. The key to passing through deep water is to engage a low gear and maintain a steady throttle for a slow and controlled passage. When driving through deep water, some electronic systems in the car may malfunction. If the vehicle is equipped with electric power steering, the steering assist system may fail. Similarly, if the car uses an electronic brake assist system, the braking system may also malfunction. If the water is too deep, it is best not to drive through it, as the numerous electronic devices in the car could be damaged or malfunction after passing through deep water, compromising driving safety.

4

1

Share

How to Adjust the Brake on a Baitcasting Reel?

Adjusting the brake is generally focused on baitcasting reels and is related to the weight of the lure being cast. Different lure weights require different brake parameter adjustments, typically starting from the 3rd setting. Adjust until the spool slightly wobbles, and during casting, gently press the spool with your thumb to prevent backlash. Below are additional details on mechanical brakes and the braking system: 1. Mechanical Brake: Adjusting the mechanical brake involves modifying the gap size and resistance between the spool and the main body to control the spool's rotation speed. Turn the mechanical brake knob clockwise to tighten it, increasing friction and resulting in shorter casts, and vice versa for longer casts. 2. Braking System: The braking system is designed to control the spool's rotation speed and address backlash issues in baitcasting reels. Common braking systems include centrifugal, magnetic, electronic, and dual braking systems.

3

0

Share

What are the levels of Shimano groupsets?

Levels from highest to lowest are: XTR, Deore-XT, Deore-LX, Deore, ALIVIO, Acera, ALTUS, TOURNEY. Here is some information about Shimano: 1. Introduction: Founded in 1921, Shimano Group is headquartered in Osaka, Japan. After more than 80 years of development, its subsidiaries are spread across 17 countries, making it a multinational corporation specializing in the manufacturing and sales of bicycle components, fishing gear, snowboards, and golf equipment. 2. Club: The Shimano Bicycle Club was established on May 1, 2002, with the aim of attracting bicycle enthusiasts, expanding mass bicycle activities, actively promoting national fitness activities, and improving the direction of Chinese bicycle sports.

13

3

Share

How to Drive on a 2-Lane Highway?

Does Model Y Need to Pay Purchase Tax?

Is it possible to change lanes to either the left or the right?

What to Do When the Car Alternator Is Not Generating Electricity?

What to Do When Driving Through Deep Water

How to Adjust the Brake on a Baitcasting Reel?

What are the levels of Shimano groupsets?

Solutions for Black Screen Issue in 2015 Elantra Navigation System?

Why is Lexus considered an IQ car?

Where to Apply for Replacement or Renewal of Driving License?

Does the car not cool without the air conditioning running?