How to Drive in the Traffic Light Waiting Zone?

2 Answers
VonPresley
07/28/25 9:43pm
Here is the relevant introduction on how to drive in the traffic light waiting zone: 1. When the straight-going light turns green: After the straight-going light turns green, you can enter the waiting zone in advance and quickly start turning left once the indicator light turns on. It is recommended to start as quickly as possible to allow more vehicles behind to pass. If the straight-going light is red, you must not enter the left-turn waiting zone, as it may be considered running a red light. 2. Left-turn waiting zone: The left-turn waiting zone refers to the area where vehicles in the left-turn lane must move forward when the straight-going light in the same direction turns green, waiting for the signal to change before turning. The left-turn lane is extended with several meters of white dashed lines, connecting directly to the middle of the road. These white dashed lines mark the 'left-turn waiting zone.' The left-turn waiting zone allows vehicles in the left-turn lane to enter in advance when the straight-going light in the same direction turns green, waiting to turn.
Was this review help?
2
0
Share
DelAriel
08/12/25 2:20am
As an experienced driver, I believe the key to navigating traffic light waiting zones lies in patience and observation. When the red light is on, I firmly stop my car behind the stop line, never crossing it or rushing forward. During this time, I carefully observe the changes in the opposite traffic light and pedestrian crossings, watching for anyone preparing to cross the road. If the light is about to turn green, I prepare in advance, such as lightly resting my foot on the accelerator without pressing it, to avoid sudden acceleration that could lead to accidents. While waiting, I keep the engine idling and avoid frequent starts and stops. I might adjust the air conditioning or listen to music, but I never look at my phone, as that can easily distract and cause accidents. From personal experience, this habit has helped me avoid multiple rear-end collisions and pedestrian complaints. Remember, safe driving isn't about reaching the destination faster, but about protecting your own life and others'. In rainy or foggy conditions, extra caution is needed in waiting zones to prevent skidding. Overall, following the rules not only ensures safety but also saves fuel and peace of mind.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

What to Do When the Car Window Fails to Roll Up or Down?

Solutions for car windows that are difficult to roll up or down include: 1. Turn on the ignition, hold the switch to raise the window, continue holding for more than 3 seconds after the window reaches the top, release the switch and immediately press it down to lower the window to the bottom for more than 3 seconds, then repeat the raising action once more to complete the initialization procedure; 2. Insert chopsticks wrapped in a wet towel into the window guide channel, forcefully move them up and down to clean the channel, and repeatedly remove the towel to wash off the dirt until no more dirt is cleaned. Reasons for difficult window operation include: 1. Damaged window lift motor or poor contact in the electrical control wiring harness; 2. Motor overheating protection; 3. Excessive resistance in the glass guide channel; 4. Lost computer data.
9
0
Share

What are the causes of abnormal noise in the transmission?

The causes of abnormal noise in the transmission are: 1. Wear and damage of bearings; 2. Abnormal gear meshing clearance; 3. Loose bolts on the transmission housing; 4. Metal peeling on gear tooth surfaces, broken gear teeth, or misalignment during assembly; 5. Water ingress into the transmission without timely repair; 6. Insufficient lubrication due to inadequate lubricant; 7. Long-term failure to replace transmission oil. Automatic transmission oil is generally replaced every 2 years or 40,000 to 60,000 kilometers, while manual transmissions require maintenance every 2 years or 40,000 to 60,000 kilometers. Transmission oil is a lubricant that keeps the gear system clean, ensuring the normal operation of the transmission and extending the service life of the transmission components.
10
4
Share

How to Remove the Small Round Mirror on Car Rearview?

Methods to remove the small round mirror on car rearview: 1. Soak the adhesive area of the small round mirror with alcohol; 2. Use a hairdryer on the hot air setting to blow on it; 3. After blowing hot air for a while, the small round mirror will fall off, and the remaining adhesive can be gently wiped away with alcohol. The small round rearview mirror is an ideal auxiliary product to ensure driving safety, increase the driver's viewing angle, and assist in overtaking and lane changing. The small round mirror is an ideal reversing aid, usually installed below the left and right rearview mirrors. On vehicles equipped with small round rearview mirrors, the driver can see the situation on the side of the vehicle and the rear wheels. It should be noted that the small round rearview mirror cannot see blind spots when changing lanes or turning, especially at night.
15
2
Share

What is the situation with the Envision steering wheel lock?

The Envision steering wheel lock is a feature where the steering wheel automatically locks after the vehicle is turned off, serving as a simple anti-theft function. This situation does not occur every time the vehicle is started. Generally, after starting the vehicle with the key, the steering wheel will automatically unlock. Sometimes, if the steering wheel is parked at a certain angle where turning the key alone is not enough to unlock it, this situation may occur. The owner should gently turn the key with their right hand while lightly turning the steering wheel with their left hand to unlock it. The Envision is positioned as a midsize SUV. In terms of appearance, it features an intelligent drag-reducing grille, aluminum roof rails, and chrome dual exhaust pipes. The dimensions of the Envision are 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm.
12
5
Share

What is the displacement of the Focus?

The displacement of the Focus is 1.8L. Automobile displacement refers to the volume of fluid inhaled or discharged per stroke or cycle, and it is an important parameter for measuring a car. Some domestic cars have their displacement marked on the body or rear of the vehicle. In terms of configuration, the Focus is equipped with front and rear center armrests, rear cup holders, hill start assist, etc. The dimensions of the Focus are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. The engine it is equipped with has a maximum horsepower of 122Ps, a maximum power of 90kW, and a maximum torque of 153Nm.
20
5
Share

How much antifreeze is needed for a full fill?

Antifreeze requires 6 to 7 liters for a full fill. The methods to check if antifreeze is low are: 1. Check the antifreeze warning light on the dashboard; 2. Observe the liquid level in the reservoir. The full name of antifreeze is antifreeze coolant. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the car is parked in cold winter. Antifreeze has properties such as preventing freezing in winter, boiling in summer, and preventing scale and corrosion all year round. Tips for selecting antifreeze: 1. Choose the freezing point based on the ambient temperature conditions where the car is used. The antifreeze's grade is its freezing point, which should be about 10 degrees lower than the local winter's lowest temperature; 2. Choose antifreeze with rust-proof, corrosion-resistant, and descaling functions.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.