How to Drive in a Roundabout?

1 Answers
LeNaomi
07/30/25 6:50am
A roundabout generally has four exits, and vehicles must travel in a counterclockwise direction. Select the desired exit location and direction, and when approaching the exit, turn on the appropriate signal light before slowly exiting the roundabout. Below are the relevant regulations: 1. Vehicles in the inner lane of the roundabout before exiting: Should merge into the outer lane in advance. If a vehicle in the inner lane exits directly and collides with a vehicle in the outer lane, it is considered continuous lane changing and bears full responsibility. 2. When entering the roundabout: It is not necessary to turn on the turn signal. Observe the traffic flow, confirm safety, and merge into the roundabout. Before exiting the roundabout, turn on the right turn signal in advance, then exit the roundabout and enter the straight lane.
Was this review help?
11
4
Share
More Forum Discussions

Where Can I Practice Driving?

Private cars can be used for driving practice, but first, you need to have a driver's license. After that, you can practice on roads with less traffic or in open parking lots or open spaces to familiarize yourself with the car. If you haven't obtained a driver's license yet, you need to go to a driving school for practice. The following are some precautions for driving practice: Precautions for practicing driving include preparations before starting practice and finding an experienced driver to accompany you. Preparations before starting practice. After getting into the car, fasten your seatbelt and adjust the seat position to ensure a good field of vision. Adjust the rearview mirror to the optimal angle. Don't be too nervous, as excessive tension can affect normal driving operations—try to relax. Novice drivers can place a "new driver" sticker on the rear of the car to alert other drivers to give way. Find an experienced driver to accompany you. When practicing, having an experienced driver in the passenger seat can help point out any shortcomings in your driving and ensure greater safety.
6
4
Share

Does replacing the catalytic converter affect the car?

Replacing the catalytic converter does not affect the car, but it may impact the engine's power output. Modern cars are all equipped with catalytic converters. Only vehicles produced in earlier years that fail to meet the National II emission standards lack catalytic converters. Composition of the catalytic converter: A catalytic converter typically consists of four main components: the shell, vibration damping layer, substrate, and catalyst coating. The shell is made of stainless steel to prevent oxide scale detachment, which could lead to substrate blockage. The vibration damping layer is composed of gaskets or wire mesh pads, serving to seal, insulate, and secure the substrate. To protect the substrate from damage caused by vibration or thermal deformation, the gasket is made of expanded mica and aluminum silicate fibers, bonded together with adhesive. The substrate is constructed from honeycomb-shaped ceramic materials, though many are also made of metal (including stainless steel). The catalyst consists of precious metals such as platinum, rhodium, and palladium, which are sprayed onto the substrate to form the purifying agent.
5
2
Share

What are the common issues with the N52B30 naturally aspirated engine?

The N52B30 naturally aspirated engine commonly suffers from oil burning issues. The functions of the engine are: 1. To fully combust the fuel input into the cylinders and generate power; 2. To determine the vehicle's power performance, fuel economy, stability, and environmental friendliness. Taking the 2021 BMW 3 Series as an example, it belongs to the mid-size car category with body dimensions of: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and a fuel tank capacity of 59 liters. The 2021 BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 250Nm, and is paired with an 8-speed automatic transmission.
17
3
Share

Where is the license plate 'Lu J' from?

Lu J is the license plate number for Tai'an City in Shandong Province. The abbreviation for Shandong Province's license plates is 'Lu', and the following letter 'J' represents Tai'an City. Below is a partial introduction to license plates from other areas in Shandong Province: 1. The provincial capital, Jinan, uses Lu A; Qingdao uses Lu B; and Zibo uses Lu C. 2. Zaozhuang uses Lu D; Dongying uses Lu E; and Yantai uses Lu F. Here is an introduction to the composition of license plate numbers: 1. The first character of a license plate is a Chinese character: it represents the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the (province, municipality directly under the central government, or autonomous region). 2. The second character is an English letter: it represents the prefecture-level administrative region where the vehicle is registered, which is the letter code for each (prefecture-level city, region, autonomous prefecture, or league). Generally, the ranking is determined by the provincial vehicle management office based on the status of each prefecture-level administrative region. 3. When assigning letter codes to prefecture-level administrative regions, 'I' and 'O' are skipped. 'O' is often used for police cars or government agencies.
14
4
Share

What Causes Brake Noise in a New Volkswagen Lavida?

Brake noise in a new Volkswagen Lavida is normal because both the brake pads and discs are brand new and still in the break-in period. It typically disappears after a few hundred kilometers. Brake noise generally stems from three main causes: scratches on the brake disc, misaligned brake pads or inconsistent brake dimensions, or issues with the brake material itself. Below are the relevant details: 1. Scratches on the brake disc: The likelihood of the original brake pads scratching the original brake disc is over 50%, but scratches do not necessarily lead to noise. As a result, 90% of repair shops and drivers do not believe the original brake pads can damage the disc. Therefore, when replacing the pads, they often do not proactively check for scratches on the brake disc. Only when the new pads start making noise do they inspect and realize the new pads do not fit well with the scratched disc, ultimately causing the noise. Solution: Always inspect the brake disc for scratches before replacing the pads. If scratches are found, it is advisable to smooth them out or replace the disc. 2. Misaligned brake pads or inconsistent brake dimensions: If the brake pads are misaligned during installation, localized friction can cause noise. Additionally, friction blocks of the same brake pad model may vary in size, especially in width. The dimensional discrepancy between manufacturers can be up to three millimeters. If brake pads of inconsistent dimensions are installed, poor fitment can also lead to noise. Solution: Reinstall brake pads that match the original model specifications. 3. Issues with the brake material itself: The noise referred to here occurs when the brake disc surface is completely smooth and flat. The reason is that current national regulations prohibit the use of asbestos-containing brake pads, but a small number of manufacturers still produce and sell them. While semi-metallic asbestos-free brake pads have a longer service life, their harder material can cause brake noise. In contrast, asbestos brake pads, being softer, often result in noise. Solution: Carefully select high-quality brake pads and replace them with better-performing ones.
4
1
Share

What brand is the transmission of the Great Wall M4?

United Automotive Electronic Systems Co., Ltd. (UAES) supplies the transmission for the Great Wall M4. Established in 1995, UAES is a joint venture between China United Automotive Electronic Co., Ltd. and Robert Bosch GmbH in Germany. The company primarily engages in the development, production, and sales of gasoline engine management systems, transmission control systems, body electronics, hybrid and electric drive control systems. Its headquarters is located in Pudong New District, Shanghai. The AMT transmission, short for Automated Manual Transmission, is an automatic shifting system with microcomputer control based on dry clutches and gear transmissions. The 6AT transmission refers to an automatic transmission with six forward gears, meaning it has six sets of gear groups with different transmission ratios. For the Great Wall M4's transmission, the following points should be noted during daily use: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While many experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to demonstrate smooth operation, but this can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). Automatic vehicles may overheat under heavy load or upshift too early, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic vehicle breaks down, it should be transported on a flatbed tow truck with the transmission in Neutral (N). Towing with a rope or dragging the vehicle directly is not recommended.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.