How to Drive at Traffic Lights?

3 Answers
SiennaFitz
07/29/25 11:21am
Vehicles (including bicycles, motorcycles, and electric vehicles) cannot go straight or turn left, but can turn right. Vehicles can go straight, turn left, or turn right (pay special attention to the directional arrows on the traffic lights). You can drive in the direction indicated by the arrows on the traffic lights. You cannot drive in the direction indicated by the arrows on the traffic lights.
Was this review help?
16
5
Share
SanPaige
08/13/25 6:36pm
When I first started learning to drive, my instructor emphasized that traffic light rules are the foundation of driving. You must come to a complete stop behind the stop line at a red light and not cross it, otherwise, the camera will capture it and issue a fine. Only start moving when the light turns green, but always observe your surroundings, especially pedestrians or cyclists crossing the street—don’t rush and cause an accident. When the yellow light flashes, it’s best to slow down and stop instead of trying to speed through, as it might turn red in seconds, which can be panic-inducing for beginners. In rainy or foggy conditions with poor visibility, be even more patient—don’t just focus on the light and forget to check your rearview mirror; be cautious if a car is approaching. Even when turning on a green light, watch for oncoming traffic and pedestrians, yielding to straight-moving vehicles first—this is my daily driving habit. Remember, practicing these rules more will help reduce accident risks.
Was this review help?
11
1
Share
Expand All
SanFrancisco
10/08/25 3:50am
After driving for over a decade, traffic lights have become as natural as eating and drinking to us drivers. Stop immediately at red lights, and don't rush when starting at green lights—especially during rush hours when intersections are crowded. Always leave some space for yourself and don't tailgate the car in front. When the light turns yellow, prepare to brake; stop if you can, and don't risk running through it—otherwise, you might end up with a hefty six-point ticket. At a right-turn green light, always yield to pedestrians first. If pedestrians aren't moving, don't force your way through—developing this habit ensures peace of mind and safety. Slowing down is even more crucial at night or in the rain, as motorcycles might dart out even when the light is green. Stick to these basics, and you'll avoid most troubles on the road.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Where is the output speed sensor of the 09g transmission located?

The output speed sensor of the 09g transmission is located at the upper front of the transmission. The automotive transmission is a set of gear-shifting devices used to coordinate the engine speed with the actual driving speed of the wheels, aiming to achieve optimal engine performance. The transmission can produce different gear ratios between the engine and wheels during vehicle operation. Below is an introduction to dual-clutch transmissions: 1. Dual-clutch transmissions come in two types: dry and wet. 2. A wet dual-clutch refers to a multi-plate clutch system where two sets of coaxial clutches (one large and one small) are installed together in a sealed oil chamber filled with hydraulic fluid. Thus, the wet clutch structure offers better adjustment capability and superior thermal performance, enabling it to transmit higher torque. 3. The dry dual-clutch was developed based on the technology of the 6-speed DQ250 wet dual-clutch, with simplified hydraulic systems. 4. The structure of a dual-clutch transmission is very similar to that of a manual transmission, featuring two sets of clutches responsible for shifting even and odd gears respectively, significantly improving shift speed.
14
0
Share

Is a Driving License Required for Car Paint Touch-Up?

Car paint touch-up requires leaving the driving license, and here are the specific reasons: 1. National requirements for vehicle repairs: Qualified shops performing sheet metal painting or repair projects are required by public security authorities to record vehicle information into the public security management system before proceeding with repairs. Failure to record the information in the system will result in corresponding liabilities, primarily to facilitate the tracing of hit-and-run vehicles or illegal activities such as smuggling and theft. Recording the information requires the vehicle's driving license, but the shop should return it promptly after recording. 2. Uploading vehicle information for post-accident repairs: If the paint job is covered by insurance and an immediate damage assessment cannot be made, and the owner is not present to wait, the owner may need to leave the driving license to facilitate the later upload of vehicle information. Many shops handling a high volume of accident vehicles will request the owner to leave the driving license and retrieve it together with the car after repairs. There are also cases where some repair shops retain the owner's driving license to manipulate insurance claims, but such practices are now rare.
5
2
Share

What are the design specifications for non-motorized vehicle ramps?

The ramp width should not be less than 0.30m, the slope should not exceed 1:5, and the ramp length should not exceed 6m. Below is an introduction to ramps: 1. Introduction: Refers to a uniformly inclined walkway or driveway. It serves as an inclined traffic passage connecting areas with elevation differences or floors, as well as vertical traffic and evacuation measures at entrances. 2. Content: When steps cannot be constructed due to usage or other reasons, ramps can be used to address height variations. Public green spaces and public buildings typically require barrier-free access, making ramps an essential element. Ramps are an important method for pedestrians to navigate elevation changes on the ground. 3. Application: Used in various public places such as residential thresholds, hotel corridors, convention centers, shopping malls, supermarket entrances, residential community gates, nursing homes, hospitals, train stations, airports, and more.
8
5
Share

What is the typical capacity of a food delivery box placed on the pedal?

The typical capacity of a food delivery box placed on the pedal is generally 30-40 liters. Below is an introduction about car pedals: 1. Introduction: The welcome pedal is an automotive accessory used to decorate the threshold area of a car, serving the purpose of protecting and beautifying the car body. It is one of the automotive modification products. Welcome pedals are mainly installed on the mudguards near the car doors, with all four doors having them. The design of car welcome pedals varies according to different car models. 2. Features: Made of stainless steel material, the welcome pedal has a smooth and shiny appearance, is easy to install, and provides certain anti-collision and anti-scratch functions. It also serves as a decorative element, being simple yet elegant. 3. Advantages: The most obvious advantage of installing welcome pedals is their decorative effect on the car. Many welcome pedals are equipped with circuits that light up when the car door is opened, creating a welcoming atmosphere for passengers.
3
1
Share

Does Desay SV 280b Support CarPlay?

Desay SV 280b does not support CarPlay. CarPlay is an in-car system. Automotive modules contain different in-car systems. Below is a detailed introduction about automotive modules: 1. Automotive Engine Control Module: The automotive engine control module is the core component of engine control. Based on input information from various sensors, it controls the fuel injection and ignition timing of the engine and provides optimal control commands for other output devices. 2. Automotive Ignition Module: The automotive ignition module, also known as the ignition controller, can achieve automatic ignition, flame indication, flameout alarm, and signal transmission by selecting the appropriate combination of metal probes or UV-sensitive tubes according to different environmental requirements.
16
0
Share

Which car has an airbag in front of the passenger seat?

airbag is the symbol for a safety airbag. Additional information is as follows: 1. Introduction: The airbag system is a passive safety protection system (see vehicle safety performance). When used in conjunction with seat belts, it can provide effective collision protection for occupants. 2. Components: It mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is usually installed on the dashboard. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are installed together with the electronic control device. The airbag module mainly consists of the airbag, gas generator, and igniter.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.