How to Drive an Envision Automatic Transmission Car?

1 Answers
Adriel
07/29/25 5:28pm
The driving method for an Envision automatic transmission car is as follows: 1. Use the remote control or key to open the door, then enter the driver's seat; 2. Adjust the seat and mirrors to clearly see vehicles behind and on both sides; 3. Confirm the positions of the accelerator and brake pedals, steering wheel, gear selector lever, light controls, defroster, and wipers; 4. Fasten the seat belt; 5. Place the right foot on the brake pedal and press down, then insert the key and turn it clockwise to start the car; 6. Keep the foot on the brake, shift the gear lever to the drive position marked as D on the display panel—the letter will light up when successfully engaged; 7. Release the handbrake; 8. Check the surrounding environment; 9. Move the car to complete the process.
Was this review help?
19
5
Share
More Forum Discussions

What Causes Body Vibration When a New Car is in P Gear?

The reasons for body vibration when a new car is in P gear are as follows: Increased Engine Load and Reduced Power: For automatic transmission models, slight vibration when shifting gears is a normal phenomenon, which is caused by increased engine load and reduced power. Abnormal Engine Idle Operation: If the vibration is more noticeable, it indicates abnormal engine idle operation. It is necessary to inspect the aspects that may cause abnormal engine idling. If the fault light is on, locate the faulty part according to the fault code. If the fault light is normal, check whether the air filter is excessively clogged with dust, then check for any cylinder misfires, and further inspect whether the high-voltage ignition system and fuel injection system of the misfiring cylinder are functioning abnormally.
15
5
Share

Are the batteries of new energy vehicles replaced for free?

New energy vehicle batteries can indeed be replaced for free within the warranty period, but there are some restrictions. Some manufacturers also have special warranty regulations. Introduction to New Energy Vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. Classification of New Energy Vehicles: New energy vehicles include hybrid electric vehicles (HEV), battery electric vehicles (BEV), fuel cell electric vehicles (FCEV), hydrogen engine vehicles, as well as gas vehicles, alcohol ether vehicles, etc.
20
5
Share

Where is the choke open position on Honda 125?

On the Honda 125, moving the choke lever upwards opens it, while moving it downwards closes it. Choke construction: There are two types of choke construction. One is an automatic electric choke, and the other is a manual choke. The manual choke is more intuitive, offers stable control, and requires no adjustments. The driver simply feels the length of the cable pulled out to adjust the mixture concentration. Function of the choke: During cold engine starts, the choke partially closes the air intake to increase the fuel concentration in the air-fuel mixture entering the cylinder, improving engine starting performance. Once the engine is running normally, the choke should be fully opened. Otherwise, an overly rich mixture can cause the engine to malfunction and increase fuel consumption. In fuel-injected engines, this process is automatically controlled and requires no manual operation.
13
3
Share

Is it allowed to make a U-turn at an intersection without traffic lights?

It is allowed to make a U-turn at an intersection without traffic lights. Permissible U-turn scenarios are as follows: Presence of U-turn signal lights or signs: When there is a U-turn signal light at the intersection, a U-turn can be made when the U-turn indicator is green. If there is a U-turn sign or a lane marking indicating U-turn permission, a U-turn can be made while ensuring the safety of oneself and others. No U-turn sign but left turns are allowed (no prohibition signs): Vehicles can make a U-turn at intersections where left turns are permitted and no U-turn prohibition signs or markings are present. Note that vehicles must proceed according to the left-turn signal light without disrupting the normal flow of other vehicles. If making a U-turn at an intersection with a left-turn waiting zone, you may enter the waiting zone when the straight signal is green and wait until the left-turn signal turns green before making the U-turn. U-turns are allowed at dashed lines: Both white and yellow dashed lines permit U-turns. For double yellow lines (one solid, one dashed), check whether your side is dashed. If it is, a U-turn is allowed safely; if solid, U-turns are prohibited. At intersections with double yellow lines, U-turns can be made on the dashed side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Yellow grid areas prohibit parking, but as long as there is no central barrier, a U-turn can be made after yielding to normally moving vehicles. U-turns are allowed on the dashed side of a green belt: When the green belt has dashed lines ahead, vehicles on that side can make a U-turn there. If the green belt has solid lines ahead, vehicles must obey the traffic signal, cross the pedestrian crossing before making a U-turn, and must not cross solid lines or the pedestrian crossing.
9
4
Share

Can Rear-Wheel Drive Cars Drift?

Ordinary rear-wheel drive cars cannot drift, but modified rear-wheel drive cars can. Introduction to Drifting: Drifting is a driving technique, also known as "tail sliding." The driver causes the car to slide sideways by oversteering. This is usually compared to grip turning. Drifting is mainly used in performances or racing events with significant changes in road conditions. Due to the friction characteristics of the road surface, drifting is frequently applied in off-road rally races, while other types of speed racing rarely use drifting techniques for turning. This is because drifting on ordinary asphalt roads results in significant speed loss and increased tire wear. Unless under special circumstances, drivers do not frequently use this technique during competitions. Methods of Drifting: Pull the handbrake while driving straight and then turn the steering wheel; pull the handbrake during a turn; slam the brakes while driving straight and then turn the steering wheel; slam the brakes during a turn; for rear-wheel drive cars with sufficient power, slam the accelerator and turn the steering wheel when the speed is not too high.
15
1
Share

Can a mortgaged car be purchased after the mortgage is released?

Mortgaged car can be purchased after the mortgage is released. Definition of mortgaged car: Simply put, a mortgaged car is a loaned car, which refers to a car that the owner mortgaged to a bank or lending institution when taking out a loan. Mortgaged cars can be roughly divided into two types: one is a vehicle purchased through bank installments, and the other is a vehicle mortgaged to an individual or company for a loan. Conditions for buying and selling mortgaged cars: The mortgage on the car must first be released before it can be bought or sold according to the normal vehicle transaction procedures. Otherwise, the buyer cannot obtain ownership of the vehicle; the buyer only has the right to use the vehicle.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.