How to Drive an Automatic Transmission for Beginners

3 Answers
DelGriffin
07/29/25 9:07am
Introduction to driving an automatic transmission is as follows: 1. Start the engine in N gear: For automatic transmission vehicles, to start the engine, the gear must be placed in N or P gear. The engine cannot start normally if placed in other gears. Remember not to release the brake casually when temporarily stopping by pressing the brake. For long stops, still shift to P gear. 2. Starting: After starting the engine, wait a few seconds before shifting gears to start, allowing the transmission to be fully lubricated. Then press the brake, shift to the correct gear, and slowly release the brake pedal to start the vehicle normally.
Was this review help?
10
5
Share
StPiper
08/12/25 8:28am
Learning to drive an automatic car is actually quite easy for beginners. When I first learned, I found it much simpler than a manual transmission. The first thing to do after getting in the car is to sit firmly and press the brake, then start the engine. Once the car is stable, shift to the D (Drive) position, gently release the brake, and let the car glide out slowly. When accelerating, don’t stomp on the gas pedal—apply it smoothly to avoid jerking forward, which can be unsafe. For reversing, shift to R (Reverse). When parking, press the brake first before shifting to P (Park) to prevent the car from rolling. Always keep your eyes on the road and check the mirrors frequently. Beginners should practice in an empty area several times to build confidence. Automatic cars are especially convenient in traffic jams since you don’t need to shift gears and can focus on the road. Take your time—within a week, you’ll be driving smoothly.
Was this review help?
10
5
Share
Expand All
StEmmanuel
10/06/25 3:49am
As a new driver who just got my license, I'd like to share some automatic transmission driving tips. I was quite nervous on my first day, but the operation is simple: press the brake pedal fully to start the engine, shift to D gear, release the brake and gently press the accelerator to move. Don't make my mistake of pressing the accelerator too hard at first - the sudden lurch gave me a scare. Always remember to shift to P gear when parking - I once forgot and my car moved slightly. When reversing with R gear, move backward slowly while watching for obstacles. Beginners should practice for half an hour daily to get familiar with starting and stopping. Automatic cars are especially convenient in areas with frequent traffic lights, making driving much easier. Focus on smooth steering wheel movements and avoid speeding. You'll soon fall in love with this driving style.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Do You Need to Press the Brake When Turning Off an Automatic Transmission Car with One Key?

You need to press the brake when turning off an automatic transmission car with one key. Introduction to Automatic Transmission: Automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, there are six gear positions on an automatic transmission car, from top to bottom: P, R, N, D, S, L. Principle of Automatic Transmission: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes over 10% more fuel than a manual transmission. Whether it's a manual or automatic transmission, the more gears it has, the more fuel-efficient it is.
9
1
Share

Will the Malfunction Indicator Light Illuminate if the Charcoal Canister Purge Valve Fails?

Will the Malfunction Indicator Light Illuminate if the Charcoal Canister Purge Valve Fails? The answer is yes. The manifestations of a faulty charcoal canister purge valve are as follows: Abnormal Noises While Driving: When the engine is operating above idle speed, specifically at 800 RPM or higher, the vehicle may produce unusual noises. Strong Gasoline Odor: Pressing the accelerator or brake may result in a noticeable gasoline smell inside the car. Poor Acceleration: After starting the engine, the idle speed may fluctuate rhythmically, and the vehicle may exhibit poor acceleration. This could be due to a clogged air inlet or filter screen in the charcoal canister. Engine Stalling or Difficulty Starting: The engine may be hard to start or may start and then immediately stall. In such cases, it is advisable to inspect the charcoal canister purge valve as a potential cause of the issue.
3
4
Share

How Long in Advance Should a Driver's License Be Renewed?

Driver's license renewal should be applied for within 90 days before the expiration date. When applying for renewal, the vehicle owner needs to bring the following materials: two copies of ID card, two 1-inch recent color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital. Renewal must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck driver's licenses who have demerit points in a scoring cycle, as well as holders of other types of driver's licenses who have caused a traffic accident resulting in death and bear equal or greater responsibility but have not had their driver's license revoked, must have completed the required review education; The applicant must have no unresolved road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The driver's license must not be seized, detained, suspended, revoked, canceled, or annulled by law. Penalties for expired driver's licenses: Driving is prohibited during the expiration period, otherwise it may be treated as driving without a license. If the driver's license is expired for less than one year, the driver can renew it at any time, but driving on the road will result in a 200 yuan fine. If the driver's license is expired for more than one year without renewal, the traffic authorities will cancel it by law. If the expiration is less than three years, the driver must retake and pass the subject one exam to restore driving eligibility. Driving during this period will result in a fine ranging from 200 to 2000 yuan. If the driver's license is expired for more than three years, it will be completely canceled, and the driver must retake the driver's license exam to drive again. Otherwise, driving will be treated as driving without a license, resulting in a 2000 yuan fine and up to 15 days of administrative detention.
10
5
Share

What to Do If You Shift to the Wrong Gear in Subject 2?

Shifting to the wrong gear but not moving and then shifting back is fine. Shifting to the wrong gear and driving forward, even if you stop midway, will cost you one of your two attempts. If you shift to the wrong gear during reverse parking or parallel parking and the car hasn't started moving, it doesn't count as a mistake. However, if you realize you've shifted to the wrong gear after the car has started moving, it will be considered a failure.
20
4
Share

Are there any disadvantages to electronic driver's licenses?

Electronic driver's licenses have usage limitations. Introduction to electronic driver's licenses: Electronic driver's licenses, commonly known as "e-licenses," serve as a supplement to physical licenses. In cases where the physical license is not carried, electronic licenses can be used for roadside checks and other verifications. Latest technology: According to a report from People's Daily in Moscow, the Russian Ministry of Internal Affairs is developing a new generation of microchip-based electronic driver's licenses and vehicle registration certificates. The new versions will be labeled in Russian, English, and French. In addition to the microchip, the new generation of licenses will also feature enhanced anti-counterfeiting measures, with laser anti-counterfeiting layers on both the upper and lower surfaces of the documents.
16
3
Share

What gas is used in car airbags?

Car airbags use nitrogen gas. Here is the relevant introduction: Composition of the airbag system: The airbag system mainly consists of sensors, a microprocessor, a gas generator, and the airbag itself. Principle of the airbag system: Sensors and the microprocessor are used to determine the severity of a collision and transmit signals. The gas generator, upon receiving the signal, initiates an ignition action, igniting solid fuel to produce gas that inflates the airbag, causing it to rapidly expand. When a collision occurs while the car is in motion, the airbag sensor first receives the impact signal. If the impact reaches a predetermined intensity, the sensor activates and sends a signal to the electronic controller. Upon receiving the signal, the electronic controller compares it with stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module. The gas generator, upon receiving the signal, ignites the gas-generating agent, producing a large volume of gas. This gas is filtered and cooled before entering the airbag, allowing the airbag to break through the padding and deploy rapidly within an extremely short time. This forms an elastic cushion in front of the driver or passenger, which then deflates and contracts in time to absorb the impact energy, effectively protecting the head and chest from injury or reducing the severity of injuries.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.