How to Drive an Automatic Transmission Car Through Deep Water

1 Answers
MacSavannah
07/28/25 8:45pm
You must first get out of the car to observe the depth of the waterlogged road. If the water depth reaches about half of the tire height, it is best not to force your way through. When passing through deep water puddles, for manual transmission vehicles, try to use first gear and avoid accelerating or shifting to higher gears to rush through. Using a lower gear ensures the vehicle maintains sufficient traction. When an automatic transmission car passes through deep water puddles, do not use automatic mode; switch to manual mode beforehand. While crossing the water, try to avoid stopping, accelerating, or changing gears. If the water level is higher than the air intake, the engine may suck in water. If the engine stalls due to water intake, do not attempt to restart it.
Was this review help?
19
5
Share
More Forum Discussions

Is White Smoke from the Exhaust Pipe Normal?

White smoke from the exhaust pipe is normal. The water vapor produced after gasoline combustion is normally discharged through the exhaust pipe. Due to the low ambient temperature, the water vapor condenses into small droplets, turning into visible water vapor, which is a normal phenomenon. However, if white smoke continues to appear after the engine has warmed up, it may indicate a damaged cylinder head gasket. Possible causes of white smoke include: 1. Some diesel fuel not being burned and turning into oil vapor, which is discharged with the exhaust gases; 2. Presence of water in the fuel or combustion chamber; 3. Poor atomization of the fuel injector; 4. Low cylinder pressure, causing some diesel fuel to turn into oil vapor without being burned, resulting in white smoke from the exhaust pipe.
13
2
Share

How to Remove the Speed Limit on Lavida?

Lavida's speed limit can be removed by: 1. Press and hold the button below the wiper lever for several seconds to clear the settings. After completion, the speed limit will no longer be displayed on the dashboard; 2. The speed alarm limit can be set or adjusted in the vehicle computer's speed alarm interface. Speed control can also be achieved through the speed limiter settings to avoid speeding. The dimensions of Lavida are 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. The car's navigation system combines touch screen and knob control operation and has MP3 playback capability, supporting USB, AUX, and SD card expansion slots.
12
5
Share

Where is the fuel tank cap opened on the Bora?

The Bora does not have a fuel tank cap switch. When the car is in the unlocked state, simply press down on the fuel tank cap to open it. The fuel tank cap is also locked when the car is locked. This is a common design for Volkswagen fuel tank caps - just gently press the cap to open it. The fuel tank cap refers to the square-shaped, stainless steel container on the car used for storing gasoline, with excellent sealing performance, typically located at the rear of the vehicle. The Bora's dimensions are 4523mm in length, 1775mm in width, and 1467mm in height, with a wheelbase of 2610mm. The car is equipped with a 1.4TSI engine featuring turbocharging and gasoline direct injection (TSI) technology, delivering a maximum power output of 96kW and peak torque of 220Nm.
9
1
Share

Does the new Vios come with a cigarette lighter?

The new Vios does not come with a cigarette lighter across all variants. Below is relevant information about the new Vios: 1. The Vios is an entry-level family car specifically designed and developed by Toyota for the Asian market, based on the NBC platform. 2. After extending the wheelbase, the Vios developed on the small car platform has almost reached the level of a compact sedan. 3. The Vios body design originates from Toyota's new century design theme "VIBRANT CLARITY", which is full of dynamism without losing robustness; the interior space is exquisitely crafted, combining high-end design with cutting-edge technology. 4. It is the high-level integration of these characteristics that has created this new century Toyota sedan.
16
4
Share

How to Close the Front Hood of a Vehicle?

To close the car hood, simply release the hood support rod and press it down to close. Here are the relevant details: 1. To close the car hood, first remove the support rod, then use both hands to gently lower the hood. When the hood is about 20cm from the closing point, release both hands to let the hood fall freely. At this point, you will hear a clear closing sound. Be careful not to close the hood with one hand or on one side, as this may cause uneven gaps on both sides of the hood. 2. Additionally, if the car hood is not fully locked, the front and rear gaps of the hood will be uneven. In this case, you need to reopen the hood and lower it again following the steps. Note: Do not press the hood forcefully with your hands, as this may cause dents on the hood.
7
5
Share

Why does the car navigation screen flicker on and off?

Car navigation screen flickering on and off may be due to poor DVD contact or circuit issues. Reasons for poor DVD contact: The machine's brake is not properly connected, or the optical head of the disc drive is dirty. Reasons for circuit issues: Component aging, natural wear, improper adjustment, environmental corrosion, mechanical friction, short or open circuits in wires. For newer cars, the causes of failure are mostly broken or intermittent wire harness leads during transportation, poor soldering or improper installation of individual components or parts, loose connectors causing poor contact, or failures caused by the poor reliability of individual components or parts.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.