How to drive a Volkswagen Polo automatic transmission car?
2 Answers
For starting and moving off in an automatic transmission car, the gear selector must be placed in the P (Park) or N (Neutral) position to allow the starter to work when starting the engine. For normal road driving in an automatic transmission car, place the gear selector in the D (Drive) position. The control system will automatically shift gears based on throttle input and vehicle speed. When driving on slopes with the D position, use the accelerator and brake pedals to control the car's climbing or descending speed. The gear selector should be moved from D to S (Sport) position. For short stops, keep the gear lever in D while pressing the brake pedal. For longer stops, it's better to shift to N (Neutral) and apply the parking brake. When overtaking, quickly increase the throttle opening, which will cause the automatic transmission to downshift by one gear automatically.
I've been driving a Volkswagen Polo automatic transmission car to commute, and I find the operation quite simple. Before getting in, check that the gear is in the P (Park) position. Then, sit down, press the brake pedal, and start the engine by pressing the ignition button or turning the key. After the car starts, keep pressing the brake, shift the gear lever from P to D (Drive) mode, and then you can release the handbrake and slowly lift your foot off the brake to start moving. On the road, you only need to focus on the accelerator and brake pedals without worrying about shifting gears. Even in traffic jams or at red lights, you don’t need to change gears when the car comes to a complete stop. If you need to reverse, stop the car, press the brake, shift to R (Reverse) gear, check your surroundings, and then back up. When going uphill, you can use S (Sport) mode to enhance power. The parking sequence is crucial: first, press the brake to stop completely, then shift to P (Park), engage the handbrake, and turn off the engine. Throughout the process, pay attention to safety—especially ensuring the brake is firmly pressed before shifting gears to avoid jerking or issues. Practice in the garage to get a feel for it. Remember these steps, and after a few months, it will feel natural.
