How to Drift with an Automatic Front-Wheel Drive Car?

How to Remotely View a Dash Cam?

Methods for remotely viewing a dash cam: You need to download the dash cam app on your phone, enter the mobile application interface, and follow the app's instructions to connect to the dash cam. Once successfully connected, you can watch the dash cam video footage on your phone, achieving synchronization between your phone and the dash cam. The dash cam can record all video images and sounds during car travel, providing evidence in the event of a traffic accident. The videos captured by the dash cam are generally stored on a memory card and can be viewed using a card reader. Some dash cams with built-in screens also allow viewing directly on the device, while others enable real-time viewing on a smartphone. By connecting and binding the dash cam to your phone, you can remotely view the dash cam footage on your phone. Some dash cams with parking monitoring features can continue recording after parking. If the vehicle experiences vibrations while parked, the dash cam will automatically start recording and send an alert message to your phone, transmitting the live feed to the app. You can then open the app to watch the footage.

7

3

Share

What are the regulations for motorcycles driving on the right side?

Motorcycles must drive on the right side when traveling on motor vehicle lanes. Below is a detailed introduction to the basis for motorcycles driving on the right side: 1. "Traffic Regulations": Article 36 of the "Traffic Regulations" states: Based on road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians must travel in their respective lanes. If there are no divisions between motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides of the road. 2. "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Article 91 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" states: If an applicant violates relevant laws and regulations while learning to drive on the road, the traffic management department of the public security organ shall impose a fine of not less than 20 yuan but not more than 200 yuan on the instructor or accompanying guide.

3

Share

Are There Purchase Taxes on Pure Electric Vehicles?

Pure electric vehicles are exempt from purchase taxes. According to Article 3 of the "Interim Regulations on Vehicle Purchase Tax of the People's Republic of China," the scope of vehicle purchase tax includes cars, motorcycles, electric vehicles, tractors, and agricultural transport vehicles. The specific scope of taxation shall be implemented in accordance with the "Motor Vehicle Purchase Tax Scope Table" attached to these regulations, and electric vehicles are not included in this taxation scope. More details are as follows: 1. Trolleybuses: The electric vehicles referred to in the regulations are trolleybuses and trams. A trolleybus is a wheeled public transport vehicle powered by electricity and supplied by dedicated transmission cables; 2. Trams: are public vehicles powered by electricity and running on tracks. However, personally purchased electric vehicles or electric-assisted vehicles, which have no tracks, no dedicated cables, and are not public transport vehicles, do not fall within the scope of purchase taxes. Additionally, three types of new energy vehicles listed in the catalog issued by the Ministry of Industry and Information Technology, namely pure electric vehicles, plug-in (including range-extended) hybrid vehicles, and fuel cell vehicles, are specifically exempt from purchase taxes.

14

0

Share

What engine does the Hongqi H9 use?

The Hongqi H9 is equipped with two types of engines: a 2.0-liter turbocharged engine and a 3.0-liter supercharged engine. The engine models are CA4GC20TD-31 and CA6GV30TD-03, respectively. The CA4GC20TD-31 engine has a maximum horsepower of 252 hp, a maximum power output of 185 kW, a maximum power speed of 5500 rpm, and a peak torque of 380 N·m. The CA6GV30TD-03 engine has a maximum horsepower of 283 hp, a maximum power output of 203 kW, a maximum power speed range of 4780-5500 rpm, and a peak torque of 400 N·m. The engines used in the Hongqi H9 are independently developed by FAW, and they are all domestically produced. The engines feature direct fuel injection technology and utilize aluminum alloy cylinder heads and blocks. For daily maintenance of the Hongqi H9's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

6

3

Share

Where is the tire pressure reset button for the base model Tiguan?

The tire pressure reset button for the base model Tiguan is located on the multifunction steering wheel. Select the settings option in the instrument cluster's multifunction display, scroll up and down to find the tire pressure option, and then select reset. Tire pressure reset method: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "beep" sound, then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, indicating the tire pressure reset is complete. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: Usually, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to turn on. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is installed directly inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to turn on. For sensor damage issues, only replacement with a new part is possible.

7

3

Share

How to Turn Off the Sound When Locking the Neta V?

Tap the home screen interface and the vehicle settings icon to enter the vehicle settings interface. View the vehicle settings icon, tap the ignition unlock switch button to control ignition unlock, and choose to turn it on or off. Tap the remote lock feedback horn switch button to control the parking remote lock feedback horn, and choose to turn it on or off. Tap the simulated car engine sound, as users can choose the alert sound according to personal preference. Tap the volume button to adjust the alert sound volume.

6

5

Share

How to Drift with an Automatic Front-Wheel Drive Car?

How to Remotely View a Dash Cam?

What are the regulations for motorcycles driving on the right side?

Are There Purchase Taxes on Pure Electric Vehicles?

What engine does the Hongqi H9 use?

Where is the tire pressure reset button for the base model Tiguan?

How to Turn Off the Sound When Locking the Neta V?

Does the Magotan have a wagon version?

What is the difference in power levels of electric vehicles?

How much longer can a China III motorcycle be used?

Can I Request a Vehicle Replacement for a Faulty New Car Battery?