How to Drift?

What to Do When the Car Lock Gets Stuck?

Steps to resolve a stuck car lock: 1. Check the remote key, the car's receiving antenna, and the lock itself; 2. Place the car's external handle near the remote key and use the remote to open and close the lock; 3. Inspect the wiring, lubricate the connecting parts, or replace the lock actuator. Reasons for a stuck car lock include a dead battery in the remote key or issues with the control module, aging of the car's remote transmitter antenna, strong magnetic interference around the car, aging or failure of the door lock actuator, or short circuits in the wiring. Many car owners tend to leave valuables in their cars, which is unsafe and can lead to stuck locks and loss of valuables. It is advisable to develop the habit of checking whether the doors and windows are closed before leaving the car to protect personal property.

9

3

Share

Where is the cabin air filter located in the Range Rover Evoque?

The cabin air filter in the Range Rover Evoque is located behind the glove compartment on the passenger side, and the white bracket needs to be removed during replacement. Functions of the cabin air filter: 1. Ensures the filter tightly seals against the housing to prevent unfiltered air from entering the cabin; 2. Separates dust, pollen, and solid particulate matter from the air; 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air. Taking the 2020 Range Rover Evoque 249PS Youth Edition as an example: It uses a gasoline engine with a 48V mild hybrid system; equipped with a 2.0T 249-horsepower L4 turbocharged engine and a 9-speed automatic transmission; features include a rearview camera, cruise control, and driving mode switching.

2

Share

Why does the clutch not spring back?

Clutch not springing back is caused by the reduced elasticity of the diaphragm spring in the clutch. When encountering this situation, the diaphragm spring needs to be replaced. The clutch is a crucial component in the vehicle's transmission system, connecting or disconnecting the engine from the gearbox. Every time you shift gears or start the car, you basically need to use the clutch. The clutch is fixed to the engine flywheel. After disconnecting the connection between the gearbox and the engine, you can see the clutch pressure plate, and beneath it is the clutch disc. The pressure plate has a diaphragm spring. If the diaphragm spring has been used for a long time, its elasticity will decrease, which affects the clutch pedal's springiness, requiring the replacement of the clutch's diaphragm spring.

3

4

Share

Which company does the Lynk & Co 03 belong to?

Lynk & Co 03 is a vehicle under the Lynk & Co brand, which is a premium automotive brand owned by Geely Group. It was jointly established by Geely Auto Group and Volvo Cars, and is built on the CMA architecture developed through the collaboration between Geely and Volvo. The 2021 Lynk & Co 03 1.5T model is a compact car equipped with a turbocharged engine, manual transmission, MacPherson independent suspension, and multi-link independent suspension. At the rear, the Lynk & Co 03 features 'L'-shaped taillights and dual round exhaust pipes, maintaining a high resemblance to the concept car and offering strong recognition. In terms of exterior design, the production model adopts split-type headlights and a horizontal grille, closely mirroring the concept car. Additionally, the body styling continues the concept car's design, particularly the slightly sloping C-pillar.

2

0

Share

What Are the Reasons for Difficult Cold Starts?

Difficult cold starts can be attributed to the following reasons: 1. Engine oil fluidity: The fluidity of engine oil is a significant factor affecting cold starts, especially in winter when reduced oil fluidity increases friction resistance during cold starts. It is recommended that car owners promptly change the oil grade; 2. Car battery: The charging and discharging performance of a car battery declines in low-temperature environments. When the battery cannot supply enough power to meet the starter's demand, the car becomes difficult to start; 3. Carbon deposits in the car: Carbon deposits can accumulate in various parts of the car, including the throttle valve, fuel injector, and spark plugs. Cold starts are relatively more challenging, and with the already low surrounding temperatures in winter, blockages in the throttle valve or fuel injector can further reduce gasoline atomization, affecting the engine's normal startup.

3

0

Share

What is the reason why the clutch cannot engage a gear when pressed down?

Clutch cannot engage a gear when pressed down due to: 1. Disconnection or jamming of the clutch pedal-clutch master cylinder transmission mechanism; 2. Leakage or jamming of the clutch master cylinder; 3. Pipeline leakage; 4. Slave cylinder leakage or mechanical transmission abnormality. Solutions: 1. Avoid prolonged semi-engaged state; 2. Fully depress the clutch pedal before shifting gears; 3. Simultaneously press brake and clutch during emergency braking. The clutch is located in the flywheel housing between the engine and transmission, with its assembly fixed to the rear plane of the flywheel by screws. The output shaft of the clutch serves as the input shaft of the transmission.

20

2

Share

How to Drift?

What to Do When the Car Lock Gets Stuck?

Where is the cabin air filter located in the Range Rover Evoque?

Why does the clutch not spring back?

Which company does the Lynk & Co 03 belong to?

What Are the Reasons for Difficult Cold Starts?

What is the reason why the clutch cannot engage a gear when pressed down?

Which aspects of a car can be legally modified?

How many kilometers does a new car's CVT transmission need for the break-in period?

What to Do with China 5 Vehicles After the Implementation of China 6?

How to Replace the Battery in a Lexus Key?