How to Drift?
3 Answers
First, after entering the driver's seat, fasten your seatbelt, then insert the key to start the vehicle. Pay attention to the RPM on the dashboard. When starting a cold engine, the RPM is usually above 1000. Wait for about 10 seconds until the RPM drops to 1000. Press the brake with your right foot and release the handbrake. Shift the gear from P to D. After shifting to D, slowly release the brake with your right foot, then gradually press the accelerator. Find a suitable entry point for the turn and steer the wheel towards the direction of the intended circle. Press the accelerator, and as the rear of the car slides, quickly counter-steer. When the car starts to circle around the target point, adjust the angle of counter-steering according to different situations.
I often practice drifting on the track, and it's definitely not about luck. You need to find a safe open space, like a closed track or parking lot, to ensure no one disturbs you. Before starting, slow down to a moderate speed, suddenly turn the steering wheel sharply in the opposite direction of the curve, while quickly stepping on the throttle to make the rear wheels lose traction and start sliding. Then, you must constantly pay attention to fine-tuning the steering wheel and throttle control to keep the car sliding smoothly. Never brake or suddenly decelerate, as it can easily lead to loss of control. After sliding out of the curve, promptly correct the steering wheel to return to normal driving. Beginners are advised to start with simple figure-eight exercises, trying multiple times to find that sense of balance. Remember, safety always comes first—wear a helmet to protect yourself, and it's best to use a rear-wheel-drive car to minimize risks. Don't mess around on public streets recklessly, as it's not only dangerous but can also damage your car and harm yourself.
From a driving safety perspective, I want to remind everyone that while drifting may look cool, it carries high risks. The core technique involves controlling the car's slide during turns, with key steps being: first decelerate, then suddenly steer and accelerate to break traction, followed by smoothly operating the steering wheel to prevent rollovers. However, many beginners overlook environmental safety—practice should only be done at professional tracks or under instructor supervision, as a single mistake could lead to rollovers or collisions. I recommend starting with small turns and progressing gradually, avoiding the temptation of high-speed drifts. Vehicle choice is also crucial—front-wheel-drive cars are extremely difficult to drift, while rear-wheel-drive vehicles are more suitable. Always check tire pressure and suspension condition. While practice is the only way to improve skills, remain vigilant about potential dangers. Don't let passion override judgment—true skill lies in safe driving.