How to Drain Water from Inside a Car?

1 Answers
McAbel
07/30/25 9:29am
Simply use a small screwdriver to unclog the drainage holes under the door seal strips to prevent water accumulation. Most car doors have drainage valves at the bottom edge. Typically, each door is equipped with three drainage valves. Under normal circumstances, the valves will automatically open when the car body is compressed. The most common cause of water entering car doors is rainwater during rainfall.
Was this review help?
13
3
Share
More Forum Discussions

How to Turn Off the Air Conditioning in an Audi?

If the cooling function is activated, simply turn the air volume control knob in the direction of decreasing air volume to turn off the air conditioning. If the AC button light is still on at this time, you can press the AC button to turn off the air conditioning. If the heating function is activated, simply turn the air volume control knob to turn off the air conditioning.
12
5
Share

How to Connect Bluetooth for Music Playback in 12th Generation Crown?

Enable Bluetooth in your phone settings, ensuring the phone's Bluetooth is turned on. Activate the car's Bluetooth system, then search for your phone via the car's Bluetooth. Once detected, connect to your phone, and your phone will prompt for pairing confirmation. After successful pairing, you can enjoy phone connectivity features such as playing music through your phone and using the car's Bluetooth for making and receiving calls.
4
0
Share

What is the method for jump-starting a car battery?

First, locate the batteries of both vehicles and ensure the rescue vehicle is turned off. Connect the positive terminals of both vehicle batteries with jumper cables. After connecting, attach one end to the negative terminal of the rescue vehicle's battery and the other end to the engine block of the vehicle being rescued. After confirming the jumper cables are properly connected, start the rescue vehicle first, then start the vehicle being rescued. Once the rescued vehicle starts successfully, the jumper cables can be removed.
13
0
Share

How to Repair a Fender Dent?

After disassembly, use a specialized hook to pry out the dent, then tap it back into place with a rubber mallet, using light to check for levelness. However, edges and reinforced areas cannot be treated this way. Alternatively, use a machine to suction out the dented portion, then tap it back with a rubber mallet. This method can also effectively repair reinforced areas.
13
0
Share

How to Replace the Battery in a BAIC Weiwang M50F Key

Press and hold the black button on the widest part of the key, then apply downward force to remove the bright silver decorative cover. Use a small flathead screwdriver or your fingernail to apply downward force and remove the bright silver decorative covers on both sides of the key. Insert an appropriately sized flathead screwdriver into the recessed hole near the metal keyring attachment point, then apply lateral force to pry open the key cover. Once opened, you'll see the key battery - simply replace the old battery.
15
1
Share

How to Auto-Fold the Rearview Mirrors on BMW X2?

On the BMW X2's central control, select "Vehicle" and press the left button on the MMI. After entering this interface, choose "Vehicle Settings". Then select "Central Locking", check the "Fold Mirrors" option, and the rearview mirrors will automatically fold when you lock the car.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.