How to Drain the Coolant in Baojun 310W?

Can Two-Tone Car Wraps Be Registered?

Two-tone car wraps can be registered. After applying a color-changing wrap to the vehicle, the owner or their agent must bring the required documents and invoice to the local vehicle management office to complete the registration process for the color change. The registration must be done within 10 days of applying the wrap. Documents required for car wrap registration: For car wrap registration, you will need the "Motor Vehicle Change Registration/Record Application Form," the original and a copy of the vehicle owner's ID, the original "Motor Vehicle Registration Certificate," the original "Motor Vehicle License," and the "Motor Vehicle Inspection Record Form" issued by the inspection officer after confirming the vehicle. Precautions for car wrapping: After the entire vehicle is wrapped, the owner should sit inside the car to check the color, any foreign objects or sand particles, and observe from different angles whether the wrap affects visibility. After the wrap is applied, the side windows should not be rolled down for 24 hours in summer and 48-72 hours in winter. The wrap, which is not yet fully adhered, can easily shift during this period.

7

5

Share

What are the requirements for seat belt suspension?

The requirements for seat belt suspension are: The rope should not be tied in knots to avoid the knot being cut under force; When used for horizontal suspension, be cautious of swing collisions; It should be vertically suspended, with a high anchor point and low usage for greater safety; The hook should not be directly attached to unstable objects or non-metal walls to prevent the rope from being severed. Origin of car seat belts: As a basic protective device for drivers and passengers during car collisions, the seat belt predates the automobile itself. As early as 1885, seat belts appeared and were used in carriages to prevent passengers from falling off. On May 20, 1902, during a car race in New York, a racer used several leather straps to secure himself and his companion to their seats to prevent being thrown out at high speeds. During the race, their car accidentally crashed into the audience, resulting in two deaths and dozens of injuries, but these racers survived due to the leather straps. These straps became the prototype of car seat belts, and their first use in a car saved the users' lives. Precautions for using seat belts: Regularly check the technical condition of the seat belts, and replace them promptly if damage is found; Seat belts must be installed in conjunction with the seats and should not be disassembled at will; If a seat belt has been subjected to a strong stretching load during use, it should be replaced even if it appears undamaged; When cleaning dirty seat belts, use mild soap and water as a cleaning solution, and scrub with a cloth or sponge. Avoid using dyes and bleach, as they can corrode the seat belt and reduce its tensile strength. Also, refrain from using hard brushes to prevent damage to the seat belt.

13

4

Share

Why Does a Motorcycle Stall After Riding for a While?

The reasons why a motorcycle stalls after riding for a while are engine overheating and electrical circuit failure. Below are the detailed explanations: Engine Overheating: Excessive temperature and poor lubrication can cause the piston and cylinder to seize, leading to stalling. The signs before stalling include a gradual decrease in power followed by a sudden stop. After diagnosis, the first step is to check whether there is lubricating oil in the crankcase. If there is little or no oil, inspect the oil pan or drain plug for leaks. Electrical Circuit Failure: Automatic stalling caused by a sudden electrical circuit interruption will not show any abnormalities in the engine before the sudden stop. The causes of sudden electrical interruption are usually related to the wiring, such as loose or disconnected joints, cut wires, or short circuits.

4

2

Share

Will motorcycles be caught by electronic surveillance for overloading?

Motorcycles will be caught by electronic surveillance for overloading. Overloading a motorcycle means carrying more than three people, including the rider. Even if the rider has all the necessary documents and everyone is wearing helmets, it still counts as overloading. Traffic police will impose a fine of 200 yuan and deduct three points from the driver's license. Regulations for riding motorcycles: Obtain a motorcycle license plate, vehicle registration certificate, and the rider must have a motorcycle driver's license; purchase compulsory traffic insurance; only the seat area is allowed for passengers, no other parts of the motorcycle can carry people; only one passenger is allowed, meaning the maximum number of people on a motorcycle is two; the rear seat cannot carry children under 12 years old; passengers must sit facing forward, not sideways; lightweight motorcycles are not allowed to carry passengers; helmets must be worn while riding. Precautions for riding motorcycles: When starting, slowly lift the clutch pedal with your left foot. When you hear the engine sound change or feel a slight vibration, gently press the throttle pedal with your right foot while slowly lifting the clutch pedal. Avoid sudden movements. When changing lanes, observe the road conditions carefully and ensure it is safe before merging; never force a lane change. When making a U-turn or turning, reduce speed and shift gears, yield to oncoming traffic, and do not rush. When reversing or parking, pay attention to the surroundings to avoid collisions with other vehicles.

1

0

Share

What causes the rear wheel of a motorcycle to wobble slightly from side to side when in gear?

The reasons for the rear wheel of a motorcycle wobbling slightly from side to side when in gear are as follows: Low tire pressure: Low tire pressure or deformation of the tire itself can cause wobbling. Check the tire and inflate it to resolve the issue. Loose rear wheel spokes: Loose spokes on the rear wheel can cause the rim to wobble or the rim itself may be deformed or damaged by external forces. If deformed, replacement is necessary. Excessive wear: Excessive wear between the connecting shaft and the guide sleeve at the hinge joint of the rear swingarm and the frame can lead to significant looseness and wobbling. Loose nuts: Worn or imbalanced bearings inside the rear wheel or a loose rear axle nut can cause the rear wheel to wobble.

6

2

Share

How many points are deducted for inaccurate positioning on the ramp?

Inaccurate positioning on the ramp deducts 10 points. Different items in Subject 2 have different deduction points. The specific analysis is as follows: Common deductions: Not wearing a seat belt, not closing the car door properly, and not having the gear in neutral when starting the engine all deduct 100 points. Not using the turn signal, using the turn signal for less than three seconds, forgetting to turn off the turn signal, or using the turn signal incorrectly, and stalling the engine each deduct 10 points. Parallel parking: If the vehicle's body crosses the line after stopping in the parking space, or if the task completion time exceeds 90 seconds, 100 points are deducted. Not using or incorrectly using the turn signal when exiting the parking space deducts 100 points. If the vehicle body touches the parking space line or the wheels touch the lane boundary line during movement, 10 points are deducted each time. Stopping for more than 2 seconds during the process deducts 5 points each time. Reverse parking: If the task completion time exceeds 210 seconds, not following the prescribed route or sequence, not driving the front wheels over the control line before reversing, or failing to park properly in the space, 100 points are deducted. Stopping for more than 2 seconds during the process deducts 5 points each time. Curve driving: If the wheels press the edge line or stop for more than 2 seconds during the process, 100 points are deducted.

14

2

Share

How to Drain the Coolant in Baojun 310W?

Can Two-Tone Car Wraps Be Registered?

What are the requirements for seat belt suspension?

Why Does a Motorcycle Stall After Riding for a While?

Will motorcycles be caught by electronic surveillance for overloading?

What causes the rear wheel of a motorcycle to wobble slightly from side to side when in gear?

How many points are deducted for inaccurate positioning on the ramp?

Does the score reset when renewing an expired license?

Is tire noise louder in summer or winter?

How Often Should a Spare Tire Be Replaced?

How soon after purchasing a motorcycle can it be licensed?