How to Drain Air from Changan Star More Effectively

1 Answers
OliviaFitz
07/28/25 7:48pm
To drain air from the Changan Star, open the vent port and add coolant to the radiator. Close the vent port once water flows out from it. Below are relevant details about radiator cooling: 1. Precautions when draining water: There is a drain plug at the lower end of the radiator. Loosen it to drain water, but be cautious as high water temperature may cause burns. When refilling water, air needs to be purged. Some vehicles have a tube under the front hood (below the wipers) that can be pulled out to vent air. Once all air is expelled, water will flow out from the tube. 2. Starting water circulation: Start the engine and let the water temperature rise until the radiator fan activates. Then check if water is circulating, which can usually be observed from the radiator filler port. This completes the circulation process.
Was this review help?
10
2
Share
More Forum Discussions

Why can't the Haval F7 be remotely unlocked?

Haval F7 cannot be remotely unlocked possibly due to poor signal or surrounding interference. High reliability: Engine remote start uses an electric motor to start the engine, eliminating mechanical wear issues of heaters, thus significantly reducing the probability of failure. Convenient to use: The remote control range is usually no less than 50 meters. If the vehicle is parked in a ground parking lot, the engine can be started remotely in advance from home or the workplace. Automatic timing: Normally, the remotely started engine will automatically shut off after a period of time if no operation is performed, avoiding possible fuel waste caused by forgetting to turn it off. Whole vehicle heating: This function, like parking heating, warms up the coolant in the radiator, so whether it's the cabin, the engine, or the windows, they can all be effectively heated.
8
2
Share

What is the fuel consumption of the Cruze 1.6 automatic transmission?

The official fuel consumption of the Cruze 1.6 automatic transmission is 7.1L/100km. Here are some related introductions about fuel consumption: 1. Habits and road conditions: Fuel consumption is greatly affected by driving habits and road conditions. Avoid hard acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator pedal heavily when starting, as this can increase fuel consumption by 2 to 3 times compared to normal acceleration. 2. Braking: Maintaining a safe distance and avoiding frequent braking can save more fuel. If you don't keep a safe distance, you may need to brake frequently on the road. When braking, the gear of an automatic transmission vehicle will drop, and the vehicle will have to accelerate again from a lower gear. Starting from a standstill or a low gear requires the engine to consume more fuel.
11
4
Share

Does the Volkswagen T-Roc have a convertible version?

Volkswagen T-Roc has a convertible version. Built on Volkswagen's latest MQB platform, it features a two-door body structure paired with a 2+2 seating layout. Exterior: The exterior of the new car does not differ much from the standard version, with the wheelbase slightly increased by 37mm. It also comes equipped with a black canvas top, giving it a very stylish look. It is reported that the soft top of the T-Roc convertible can be opened or closed in just 12 seconds. Additionally, if the vehicle shows a tendency to roll over, roll bars near the rear headrests will deploy within 1 second to ensure the safety of the passengers. Powertrain: In terms of powertrain, the car is equipped with a 1.5T engine, paired with a 7-speed dual-clutch transmission, delivering a maximum output power of 110kW and a peak torque of 250Nm.
17
3
Share

Why is the Emgrand audio system not working?

Emgrand audio system not working causes and solutions are as follows: Speaker wiring fault: Faulty speaker wiring inside the door can result in no sound from the rear speakers when the audio system is turned on. The repair technician can identify the malfunctioning speaker by sound, remove the door trim panel to check for loose speaker wiring connections, and use a multimeter to test the continuity of the speaker wiring to determine if there is a fault. Repairing the speaker wiring will resolve the issue. If the vehicle is under warranty, this can be addressed for free at a 4S shop. Speaker damage: In new vehicles, the speaker diaphragm is relatively stiff, and setting the speaker volume too high can easily cause diaphragm rupture, leading to abnormal speaker sound. The repair technician can identify the malfunctioning speaker by sound and will need to replace the speaker. If the vehicle is under warranty, the speaker can be replaced for free at a 4S shop.
19
2
Share

Can a Dash Cam Be Used Without a Memory Card?

A dash cam typically cannot record videos without a memory card, though some models come with built-in storage. Therefore, it's important to carefully check the specifications when purchasing a dash cam. It is recommended to use a dash cam with an external memory card for easier video downloading when needed. The memory cards used in dash cams are usually TF or SD types. TF cards are small and primarily used in mobile phones, while SD cards are larger and commonly found in digital cameras and other portable devices. A dash cam is a device that records images, sounds, and other relevant data during vehicle travel. Once installed, it can capture the entire driving process in video and audio, providing evidence in case of traffic accidents. Dash cams are mainly divided into two categories: portable dash cams and aftermarket in-dash DVD dash cams. Portable dash cams can be further classified into rearview mirror dash cams and data dash cams, which are known for their discreet appearance, easy installation, removable and replaceable features, and simple operation.
15
1
Share

Where is the spark plug located on the Baojun 310?

The location of the spark plug on the Baojun 510: Spark plugs are installed on the side or top of the engine. In early models, spark plugs were connected to the distributor via ignition cables. Over the past decade, most car engines have been modified to have the ignition coils directly connected to the spark plugs. How spark plugs work: The ground electrode of a spark plug is connected to the metal shell, which is then attached to the engine block via threads on the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.