How to distinguish the three modes of Hyundai ix25?

What is the distance for pulling over in Subject 3?

In the Subject 3 driving test, the effective distance for pulling over is 30cm. After parking, if the distance between the vehicle body and the right edge of the road or the curb exceeds 30cm, 10 points will be deducted. The penalty standards for pulling over are as follows: 1. Before parking, failing to observe the traffic conditions behind and to the right through the interior and exterior rearview mirrors: deduct 100 points; 2. After the examiner issues the command to pull over, failing to park within the specified distance: deduct 100 points; 3. After parking, the vehicle body exceeds the right edge of the road or the curb: deduct 100 points; 4. After parking, failing to turn the head to observe the side and rear traffic conditions before opening the door: deduct 100 points; 5. Failing to close the door after getting out of the vehicle: deduct 100 points; 6. After parking, the distance between the vehicle body and the right edge of the road or the curb exceeds 30cm: deduct 10 points; 7. After parking, failing to engage the parking brake tightly: deduct 10 points; 8. Releasing the foot brake pedal before engaging the parking brake tightly: deduct 10 points; 9. Failing to turn off the engine before getting out of the vehicle: deduct 5 points.

13

1

Share

What does 'maximum' mean on tires?

Maximum tires are produced by the Giti brand, which supplies tires for vehicles such as General Motors, Volkswagen, Peugeot Citroën, Fiat, and Volvo. Below is additional information: 1. Brand Portfolio: Giti Tire owns multiple brands including Giti, GT, Duntlop, Hualin, Greatwall, Roadking, Silverstone, and Runway, catering to different market segments with a comprehensive and high-quality product lineup. This meets the needs of various vehicle types such as sedans, SUVs, off-road vehicles, racing cars, light trucks and vans, trucks, buses, construction machinery, and agricultural machinery. 2. Sales: Giti offers a wide range of high-quality tires that are sold in over 100 countries worldwide and have received recognition from both domestic and international automotive manufacturers. Tires are typically composed of three parts: the outer tire, inner tube, and flap. Some tires do not require an inner tube, as they feature an inner layer of highly airtight rubber and must be paired with specialized rims. Globally, tire structures are evolving towards tubeless designs, radial construction, flat profiles, and lightweight materials.

5

4

Share

What is No. 30 Engine Oil?

Mechanical oil grades are determined based on their kinematic viscosity at 50°C. The kinematic viscosity of No. 30 mechanical oil at 50°C ranges from 27 to 33 mm²/s, with a pour point of -10°C and a flash point of 180°C. Mechanical oils are categorized into seven grades from 10 to 70, with higher numbers indicating greater viscosity. The SAE lubricant viscosity classification for summer oils includes grades 20, 30, 40, and 50, where higher numbers denote higher viscosity and suitability for higher maximum temperatures. Below are specific details about engine oil: 1. Mineral Oil: Derived from crude oil, mineral oil is typically low-cost but oxidizes more easily due to its mineral base. Various imported additives are included, and its service life is approximately six months. 2. Semi-Synthetic Oil: Although more expensive to refine, it offers excellent oxidation resistance, making it a high-quality long-lasting oil with a service life of about twelve months. Considering the balance between price and quality, semi-synthetic oil has the widest range of applications. 3. Full Synthetic Oil: This is chemically synthesized oil that can maintain lubrication even when the base oil deteriorates.

13

2

Share

Is it necessary to purchase insurance for a used car by oneself?

Insurance for a used car is similar to that for a new car. After the vehicle is transferred, the insurance follows the transfer, and the insurance renewal can be processed directly with the insurance company where the policy is held. The original owner usually cancels the commercial insurance but retains the compulsory traffic insurance, as the compulsory insurance cannot be canceled in principle. After cancellation, the new owner can re-insure with any insurance company. Below is additional information: 1. Transfer of used car insurance: The transfer of used car insurance mainly involves two methods—changing the policy details or canceling the existing policy and obtaining a new one. The former involves changing the insured and owner while keeping the insurance content unchanged. The latter involves canceling the original car insurance and paying the premium for the period from the start of the policy to the cancellation date. 2. Reasonable purchase of insurance: One of the reasons buyers choose used cars is to save costs, and the selection of car insurance should follow this principle. When insuring a used car, owners should not blindly purchase insurance but should eliminate coverage that is meaningless for a used car. However, they should not just go for the cheapest option; it should be based on their actual needs—what suits them best.

14

0

Share

Can the Tire Date Face Inward?

Typically, tires with an inside and outside orientation have the OUTSIDE mark on the same side as the production date, so the tire production date usually faces outward during installation. For symmetric tread tires, there is no inside or outside distinction, but it is best to place the side with the production date facing outward. For unidirectional tread tires, they should be installed following the direction of the arrow, which indicates the rolling direction of the wheel. Below is additional information: 1. Tires: Tires are one of the most important components of a vehicle, serving several key functions: supporting the entire weight of the vehicle, bearing the load of the car; transmitting traction and braking torque, ensuring adhesion between the wheel and the road; absorbing and reducing vibrations and impacts during driving, preventing severe vibrations and premature damage to vehicle components; adapting to the high-speed performance of the vehicle and reducing driving noise, ensuring safety, handling stability, comfort, and fuel efficiency. 2. Specifications: Tire specifications are often represented by a set of numbers. The first number indicates the tire section width, and the second number indicates the rim diameter, both in inches. The letters or symbols in between have special meanings: tire structure: "R" stands for radial tires, while "D" or "-" stands for bias tires.

12

2

Share

What are the differences between the Magotan B8 and B8L?

The main differences between the Magotan B8L and B8 lie in the body dimensions, with the B8L being a long-wheelbase model. They also differ in maximum power/maximum torque, mixed fuel consumption [L/100km], and 0-100km/h acceleration time [s]. Below are the detailed differences between the Magotan B8L and B8: 1. Maximum power/maximum torque differ: (1) Magotan B8: Maximum power/maximum torque 110kW/250N.m. (2) Magotan B8L: Maximum power/maximum torque 137kW/320N.m. 2. Mixed fuel consumption [L/100km] differs: (1) Magotan B8: Mixed fuel consumption [L/100km] 5.8. (2) Magotan B8L: Mixed fuel consumption [L/100km] 6.3. 3. 0-100km/h acceleration time [s] differs: (1) Magotan B8: 0-100km/h acceleration time [s] 9.1. (2) Magotan B8L: 0-100km/h acceleration time [s] 8.1.

14

3

Share

How to distinguish the three modes of Hyundai ix25?

What is the distance for pulling over in Subject 3?

What does 'maximum' mean on tires?

What is No. 30 Engine Oil?

Is it necessary to purchase insurance for a used car by oneself?

Can the Tire Date Face Inward?

What are the differences between the Magotan B8 and B8L?

Why is there a gasoline smell when the air conditioning is on in the car?

What is the top speed of the Kawasaki H2R?

How many kilometers can 3 liters of oil run?

What is the difference between Audi A4L40 and Audi A4L45?