How to Distinguish the Quality of Car Window Tints?

What are the reasons for rapid consumption of car coolant?

There are several main reasons for the rapid consumption of car coolant: 1. Poor design of the cooling system. 2. Leakage. 3. Poor circulation leading to fast consumption. 4. Coolant entering the cylinder and being burned. Below is some relevant information: 1. Coolant, also known as antifreeze, is a liquid composed of antifreeze additives, additives to prevent metal corrosion, and water. It has properties such as antifreeze capability, corrosion resistance, thermal conductivity, and non-deterioration. Currently, antifreeze primarily composed of ethylene glycol, along with anti-corrosion additives and water, is commonly used. 2. The engine cooling system of internal combustion vehicles is a liquid-cooled closed-loop system consisting of cylinders, jackets, and radiators. The working condition of the cooling system directly affects the normal operation of the vehicle and its service life.

6

3

Share

Does changing from V to H speed rating for original tires have any impact?

Changing from V to H speed rating for the original tires has no impact on the vehicle's performance. V and H represent the speed rating of the tires, which is not directly related to the vehicle's performance. Additionally, vehicles on the road are subject to speed limits and will not reach the tire's maximum speed. The speed rating of tires is indicated by letters, including E, F, G, small K, L, M, N, P, Q, T, T, U, H, V, W, Y, and Z. The higher the speed rating, the greater the maximum speed the tire can withstand while driving, and the stronger the tire's grip. It is important to note that the higher the speed rating, the worse the tire's wear resistance. As the speed rating increases, the materials used in the tire become softer, reducing wear resistance. When using a vehicle, it is essential to consider not only the tire's speed rating but also to monitor the tire's condition, as this affects driving safety.

1

5

Share

How to Park with Auto Hold?

Steps for parking with auto hold are as follows: brake and shift to N gear; pull the electronic handbrake; release the brake and shift to P gear; turn off the engine. Auto hold is an automatic braking function that simplifies operations, especially in heavy traffic conditions. Auto hold must rely on an intelligent braking system, such as the ESP braking control system. Once auto hold is activated, after the vehicle comes to a complete stop and the indicator light appears on the dashboard, you can release the brake pedal. The electronic handbrake and auto hold system are two separate systems; auto hold is not achieved through the electronic handbrake. When the vehicle needs to be parked for an extended period, the handbrake is often used for parking. However, the electronic handbrake reacts slowly and is more cumbersome to operate. For temporary parking, auto hold is often used, which achieves automatic braking, avoiding the need to use the handbrake or electronic handbrake, and eliminates the need for frequent gear shifting in automatic transmission vehicles.

15

1

Share

Can a temporary ID card be used for the subject three driving test?

Temporary ID cards can be used for the subject three driving test. Temporary ID cards have legal validity in proving a citizen's identity and are valid identification documents for driver's license procedures. Applicants can take the subject three test with a temporary ID card. In many places, household registration books or residence permits can also be used for the subject three test, but to be on the safe side, it is recommended that candidates bring both their temporary ID card and household registration book. Additional information: 1. According to Article 103 of the newly revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" implemented on April 1, 2016, the identity proof for residents is either a "Resident ID Card" or a "Temporary Resident ID Card." 2. For mainland residents living outside their registered permanent residence, the identity proof submitted in accordance with Articles 19, 21, 22, and 83 is either a "Resident ID Card" or a "Temporary Resident ID Card," along with a residence certificate issued by the public security authorities.

11

4

Share

How to Change Tires on a Vehicle with Built-in Tire Pressure Monitoring?

For vehicles with built-in tire pressure monitoring, the tire pressure monitoring system needs to be reset after changing tires. The reset operation steps are as follows: 1. With the car turned off but powered on, simultaneously press the unlock and lock buttons on the car key for 3 to 5 seconds until the vehicle beeps twice; 2. Unscrew the valve cap of the left front wheel and continuously deflate the tire for about 15 seconds. When you hear a short beep from the car, the tire is successfully set; 3. Follow the above sequence to reset the car tires in the order of left front wheel, right front wheel, right rear wheel, and left rear wheel; 4. When all four tires are set, the car will emit two short beeps, indicating that the car has completed the relearning process. There are three types of car tire pressure monitoring systems: direct tire pressure monitoring, indirect tire pressure monitoring, and composite TPMS. Direct tire pressure monitoring and composite TPMS require the installation of tire pressure monitoring sensors on the car tires or rims, and the sensors need to be replaced together when changing tires.

15

2

Share

Where is the Tire Pressure Monitoring Display on the Wildlander?

The tire pressure monitoring display on the Wildlander can be viewed on the dashboard. However, it only appears when the tire pressure is abnormal and remains hidden under normal conditions. What to do if the tire pressure is low: If there is no visible damage to the car's tires, you can simply inflate them to the normal pressure and then reset the tire pressure system. If upon inspection you find that a tire has been punctured, you should promptly drive to a car repair shop to have the tire patched before reinflating it. If the low tire pressure warning appears again some time after inflating, but there are no punctures, it might be due to air leakage caused by a deformed wheel rim. In this case, it is recommended to check the wheel rim and replace it if necessary. How the tire pressure monitoring system works: It uses pressure sensors installed inside the tires to measure the air pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.

9

5

Share

How to Distinguish the Quality of Car Window Tints?

What are the reasons for rapid consumption of car coolant?

Does changing from V to H speed rating for original tires have any impact?

How to Park with Auto Hold?

Can a temporary ID card be used for the subject three driving test?

How to Change Tires on a Vehicle with Built-in Tire Pressure Monitoring?

Where is the Tire Pressure Monitoring Display on the Wildlander?

Will the battery be damaged if the positive and negative terminals are reversed?

What Causes the Car Wiper to Not Turn Off?

What Causes the Engine Yellow Light to Illuminate After Filling Up a Full Tank of Gas?

What is the freezing point of antifreeze that can be used?