How to distinguish the front and back of car tires?

1 Answers
LaManuel
07/24/25 12:41am
The method to distinguish the front and back of car tires is: differentiate through the markings on the tire sidewall. The side marked 'inside' indicates the inner side, while 'outwards' indicates the outer side. Effects of installing tires incorrectly: 1. Reduced grip, leading to inconsistent resistance on both sides; 2. Decreased braking efficiency, potentially causing the vehicle to veer and unstable steering; 3. Poorer water drainage. Functions of tires: 1. Generate driving force, braking force, and lateral force through interaction with the road surface; 2. Bear the weight of the car; 3. Provide cushioning and shock absorption. The normal tire pressure range is 2.3 to 2.8 bar. In winter, it can be appropriately increased by 0.2 bar, while in summer, it should be reduced by 0.1 bar to prevent blowouts.
Was this review help?
4
4
Share
More Forum Discussions

How much fuel does each segment of the MG ZS fuel gauge represent?

The MG ZS fuel gauge has a total of 8 segments, with a fuel tank capacity of 56 liters. Each segment represents approximately 7 liters of fuel. Fuel Warning Light: Most vehicles are equipped with a fuel warning light. When the fuel light turns yellow, it indicates that only 1/4 of the fuel remains. This is generally the time to refuel, though it's advisable not to wait until the yellow light illuminates. A red light signifies critically low fuel levels. Audible Alarm: Some vehicle models feature an audible alarm when fuel is running low. According to the manual, when the alarm sounds, it means there are roughly 6 liters of fuel remaining in the tank. The fuel gauge reading changes gradually in response to fuel consumption. If the gauge suddenly drops from 1/2 to 0, this clearly indicates a malfunction in the fuel gauge.
5
2
Share

What is the Hazard Warning Light Called?

The hazard warning light is called the hazard indicator, which is a signal light used to alert other vehicles and pedestrians to special situations occurring with the vehicle. Situations for turning on the hazard warning light include: 1. When the vehicle malfunctions; 2. Breakdown on the highway; 3. When towing a faulty motor vehicle; 4. Emergency malfunction while driving; 5. Temporary parking on the road; 6. When the vehicle is involved in a traffic accident. Car lights include: 1. Position lights: To signal the presence of the vehicle to oncoming and following traffic; 2. Turn signals: To indicate turning movements to other vehicles and pedestrians; 3. Headlights: Comprising low beam and high beam, used for illumination; 4. Fog lights: Light signals used in foggy conditions; 5. Reverse lights: To alert pedestrians and vehicles behind when reversing; 6. Brake lights: To warn following vehicles.
15
1
Share

What is the reason for the Corolla Hybrid not being able to accelerate when wading through water?

Corolla's inability to accelerate may be caused by clogged fuel lines, insufficient fuel pump pressure, clogged fuel injectors, blocked exhaust system, excessive carbon buildup in the throttle body, etc. Correct usage method of Corolla's accelerator: When starting the engine, do not press the accelerator pedal all the way down, it is better to slightly exceed the idle speed. When starting off, it is advisable to apply a little acceleration just before the clutch engagement point, with the throttle opening preferably at a small to medium level. Releasing the clutch should be closely coordinated with pressing the accelerator, and the action should be agile. Introduction to Corolla: Corolla, formerly translated as "Corolla", is a brand of Toyota Motor Corporation. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads to ensure relatively ideal sports performance.
8
4
Share

Which country produces the Roewe i5 engine?

The Roewe i5 engine is produced in China. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder to push the piston to do work. Taking the 2020 Roewe i5 as an example, it is a compact car with a body size of 4601mm in length, 1818mm in width, 1489mm in height, a wheelbase of 2680mm, a fuel tank capacity of 45 liters, and a body weight of 1270kg. The 2020 Roewe i5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, a maximum torque of 250Nm, a maximum power of 124kW, and is paired with a 7-speed dual-clutch transmission.
17
0
Share

Where is the problem with the car body pressing the line?

There are two aspects to the problem of the car body frequently pressing the line: 1. Posture issue: To maintain stability with the line, you need to keep a consistent posture each time. The most fundamental aspect is the seat position—whether you are sitting in the center of the seat, not too far left or right; and whether your whole body is bending forward or your neck is leaning. Posture issues directly affect whether you can comfortably press the clutch pedal all the way down and whether your hands are flexible and comfortable when steering. 2. Speed issue: Only by controlling the speed can you have the time and opportunity to adjust. Many people have learned how to correct the direction but still occasionally press the line. A major reason is not mastering the speed well. Although they steer at the right time, they still press the line because the steering and speed control are not well coordinated.
20
5
Share

Is it okay for the 2017 Volkswagen Bora manual transmission half-shaft to have oil seepage?

It is okay for the 2017 Volkswagen Bora manual transmission half-shaft to have oil seepage. Excessive oil in the reducer: If there is too much oil in the drive axle reducer, and the oil level exceeds the normal height, the excess oil should be drained to maintain the oil level at the standard height. Clogged reducer vent hole: If the drive axle reducer vent hole is clogged, the oil temperature rises during driving, increasing pressure and causing oil to be forced out, which can damage the oil seal. Deteriorated or aged oil seal: If the oil seal loses its sealing function, it should be replaced. Improper oil seal installation: Or if the oil seal is of poor quality. If the oil seal fits too loosely with the seat hole, or if the car half-shaft oil seal is of poor quality or the size does not match.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.