How to Distinguish Road Numbers?

Front Brake or Rear Brake for Motorcycles?

Motorcycles should use the front brake when braking. The front brake of a motorcycle has good sensitivity: motorcycles should use the front brake because the sensitivity of the front brake is excellent. However, during braking, the center of gravity shifts forward, and the pressure on the front wheel will be much greater than that on the rear wheel, so the front brake cannot be used when riding at high speeds. Generally, small-displacement motorcycles primarily use the rear brake, with the front brake as a secondary option. But remember that the front brake should not be adjusted too tightly, as this can easily cause safety hazards. Motorcycle braking requires pulling the clutch: when riding at higher speeds, if you brake without pulling the clutch, the engine will automatically shorten the braking distance. If the speed is slow or when stopping, pulling the clutch can avoid stalling during braking. After all, the main function of the clutch is to cut off the engine's power transmission.

3

0

Share

How to Use Cruise Control in Lexus?

The method to use cruise control in Lexus is as follows: 1. Press the control switch to activate cruise control standby. The cruise control lever is located near the steering wheel. After accelerating to the desired speed, push the lever downward to set the cruising speed; 2. Cruise control allows the driver to automatically maintain the vehicle speed without pressing the accelerator pedal; 3. Especially during long-distance driving on highways, it can reduce driver fatigue and minimize unnecessary speed changes, thereby achieving fuel savings. When activating cruise control, ensure that the difference between the current speed and the set speed is not too large. A significant gap between the current speed and the set speed may cause sudden acceleration, which not only increases fuel consumption but also poses safety risks. For example, if the target speed is set to 120km/h on the highway, do not immediately activate the cruise control system after exiting a toll booth where the speed is generally not very high, as this could lead to rear-end collisions or loss of vehicle control.

11

5

Share

Why is there a dragging sensation when releasing the accelerator?

Throttle engine dragging sensation may be related to cleaning the fuel system. Reasons for the dragging sensation when releasing the accelerator: Releasing the accelerator may trigger the upshift mechanism, causing the engine speed to naturally drop during upshifting. This drop in speed leads to a reduction in engine torque output. Moreover, being in a throttle-off state further exacerbates the insufficient engine torque, resulting in the engine's kinetic output being less than the vehicle's demand. At this point, the vehicle pulls the engine, creating a dragging sensation. Automatic transmission models experiencing dragging sensation when releasing the accelerator: This is caused by the transmission's shift logic. After releasing the accelerator, the control unit may command the transmission to downshift at low speeds, which is more common in AT transmission models. CVT and dual-clutch transmissions perform better in this regard. If the dragging sensation is severe, it is advisable to check whether the transmission fluid has deteriorated or if the solenoid valves are functioning properly. Conduct corresponding troubleshooting based on the inspection.

1

2

Share

What is a Torque Converter in a Transmission?

Torque Converter is a component in automatic transmissions that transmits power from the engine flywheel, replacing the clutch in traditional manual transmissions. Working principle of torque converter: Fluid circulates within the chamber, where the impeller (pump), turbine, and stator are connected to the input shaft, output shaft, and housing respectively. When the prime mover (internal combustion engine, electric motor, etc.) drives the input shaft to rotate, the fluid flows out from the centrifugal impeller, sequentially passes through the turbine and stator, then returns to the impeller, circulating continuously. The impeller transfers the mechanical energy from the input shaft to the fluid. Components of a torque converter: The hydraulic torque converter (Fluid-Torque-Converter) consists of three hydraulic elements - impeller, turbine, and stator. It is installed between the engine and transmission, using automatic transmission fluid (ATF) as the working medium, serving functions of torque transmission, torque conversion, speed change, and clutch engagement.

4

3

Share

Is It Necessary to Tie Red Cloth Strips on New Cars?

Buying a new car and hanging red cloth strips is because red symbolizes joy, auspiciousness, and good fortune. Tying red cloth strips on rearview mirrors: The most popular place to tie red cloth strips is on the rearview mirrors, as people believe it stands out and adds a lively sense of beauty. However, this is actually an unsafe practice. When the red cloth strips sway in the wind in front of the rearview mirror, they create a red tint, obstructing the view of what’s behind the car. This can make it difficult for drivers to judge the situation behind them, potentially leading to accidents. Tying red cloth strips on tires: Before leaving the factory, car tires are balanced for high-speed rotation to prevent shaking at high speeds. Once red cloth strips are tied, they immediately disrupt the wheel balance, affecting the vehicle’s performance. Additionally, a red cloth soaked with water and dirt can weigh as much as a lead balancing weight, causing imbalance when the tires rotate at high speeds.

18

2

Share

Is Haval a Domestic Car Brand?

Haval is a domestic automobile brand. As a subsidiary brand of Great Wall Motors, Haval primarily manufactures SUV models and has consistently maintained its position as the sales leader in the domestic SUV market. It is highly favored by off-road enthusiasts among the general public. Below is an introduction to Haval: 1. Great Wall Haval is a crucial SUV series under Great Wall Motors, consistently achieving top sales in the domestic SUV market and beloved by off-road enthusiasts. The Haval series includes models such as the IF, M1, M2, M4, H2, H3, H5, H6, H7, H8, the all-electric SUV Haval E, and several practical pickup trucks, all of which have performed well in both domestic and international markets. 2. Haval vehicles feature a body-on-frame construction, which provides high structural strength, significantly reducing the transmission of deformation to the cabin and chassis system during collisions. This design allows the vehicle to withstand greater torsional forces when traversing challenging terrains.

14

0

Share

How to Distinguish Road Numbers?

Front Brake or Rear Brake for Motorcycles?

How to Use Cruise Control in Lexus?

Why is there a dragging sensation when releasing the accelerator?

What is a Torque Converter in a Transmission?

Is It Necessary to Tie Red Cloth Strips on New Cars?

Is Haval a Domestic Car Brand?

What are the ExxonMobil POE grades?

Where is the electric heating button for the vv6's rearview mirror?

Why are there water droplets at the car's air conditioning vents?

Where is the fuel tank switch located on the Highlander?