How to Distinguish Left and Right Windshield Wipers on the Mondeo?

1 Answers
XavierFitz
07/30/25 12:12am
The Mondeo's windshield wipers are longer on the left and shorter on the right. In the past, wipers were not differentiated between left and right, but modern vehicles have wipers of different sizes on each side. The left wiper can only rotate approximately 90 degrees, while the right wiper has a larger rotation range, thus covering a bigger operational area. Generally, windshield wipers are longer on the left and shorter on the right, and they sweep from the bottom right to the top left. Below is some relevant information: 1. The wiper on the driver's side is longer, while the one on the passenger side is shorter. This design aims to maximize the driver's frontal field of vision while preventing rainwater from being swept to the left side, which could obstruct the driver's view. Some vehicle models have wipers of the same length on both sides, but the hooks connecting the wiper blades to the arms are differentiated—left-side blade hooks have their openings on the right, and right-side hooks have their openings on the left. The wiper blades cannot be installed in reverse due to the hook orientation. 2. During rainy or snowy weather, windshield wipers are essential for providing clear visibility and preventing accidents caused by poor road visibility. Therefore, regular maintenance and timely replacement of wipers are crucial to ensure they function properly when needed.
Was this review help?
9
0
Share
More Forum Discussions

What does the tire specification 245/55r19 mean?

Tire specification 245/55r19 refers to: 1. 245 indicates the tire width is 245 millimeters; 2. 55 represents the aspect ratio of the tire as 55%; 3. r denotes a radial tire; 4. 19 signifies the rim diameter is 19 inches. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to prevent severe shocks from damaging vehicle components. Methods for maintaining car tires: 1. Regularly check tire pressure; 2. Remove debris from tire treads; 3. Inspect tire wear and replace them promptly when necessary; 4. Perform tire rotation to ensure even force distribution among all four tires and avoid excessive wear.
15
1
Share

What are the rules for scheduling a driver's license test?

Here is a detailed introduction to the rules for scheduling a driver's license test: 1. Scheduling time for each subject: You can schedule the subject two test ten days after passing subject one. You can schedule the subject three test thirty days after passing subject one. Students can choose by themselves, and either subject can be taken first. Subject four can be scheduled at any time after passing the first three subjects. 2. Retake scheduling rules: For all subjects, retakes can be scheduled ten natural days after failing the test. 3. Other scheduling rules: The vehicle management office should arrange the test according to the scheduled test site and time. After passing subject one, the applicant can schedule subject two or subject three road driving skill test. In some places, applicants can schedule subject two and subject three road driving skill tests at the same time, and the tests can be conducted continuously after successful scheduling.
4
5
Share

What is an Automotive Air Conditioning Circuit Diagram?

Automotive air conditioning refrigeration systems consist of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These parts are connected by copper pipes and high-pressure rubber hoses to form a sealed system. During operation, the refrigerant circulates through this closed system in different states. Below is an introduction to the working process of automotive air conditioning: 1. Compression Process: The compressor draws in low-temperature, low-pressure refrigerant gas from the evaporator outlet and compresses it into high-temperature, high-pressure gas, which is then discharged. 2. Heat Dissipation Process: The high-temperature, high-pressure superheated refrigerant gas enters the condenser, where it condenses into a liquid due to the reduction in pressure and temperature, releasing a significant amount of heat. 3. Throttling Process: The higher-temperature and higher-pressure refrigerant liquid passes through the expansion device, where its volume increases, and its pressure and temperature drop sharply, exiting the expansion device as a mist (fine droplets).
1
4
Share

Where Does the Gap in the Front Windshield Lead To?

Generally, this gap is connected to the air conditioning vents because the air from the windshield defogging function comes out from here. Specific details are as follows: 1. Items falling in: If something falls into this gap, it will most likely end up at the air conditioning vent. If the item is very small, it might fall to the bottom of the air conditioning duct. Typically, items that fall in won’t damage any components; at worst, they might block the air deflector or cause noise while driving. Turn on the air conditioning and check the airflow—if there’s no impact or unusual noise, there’s usually no issue. 2. Avoid installing sealing strips: Installing a sealing strip would block the vent, rendering the defogging function ineffective. Additionally, much of the car’s noise comes from the internal engine, so installing sealing strips has minimal effect on noise reduction.
2
2
Share

How to Turn on the Heater in a Regal?

The steps to turn on the heater in a Regal are: 1. Open the driver's side door; 2. Depress the brake pedal to prepare for engine start; 3. Press the one-touch start button; 4. All instrument lights will illuminate, indicating the engine has started; 5. Press the AUTO button located on the center console. Taking the 2020 Regal as an example, it belongs to the midsize car category with body dimensions of: length 4904mm, width 1863mm, height 1461mm, wheelbase 2829mm, fuel tank capacity 55L, and trunk capacity 441L. The 2020 Regal is equipped with a 1.5T turbocharged engine delivering maximum horsepower of 169PS, maximum power of 124kW, maximum torque of 250Nm, paired with a 9-speed automatic transmission.
13
2
Share

Is it sufficient to only disconnect the negative terminal of a car battery?

It is sufficient to only disconnect the negative terminal of a car battery. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Car batteries are categorized into conventional batteries, dry-charged batteries, and maintenance-free batteries. The effects of a depleted car battery include: 1. Reduced battery lifespan, as frequent depletion shortens its usable time; 2. Inability to start the car, rendering the vehicle unusable and causing other electrical devices in the car to malfunction; 3. Loss of data in the vehicle's control modules during startup, leading to operational issues; 4. Overheating of the starter motor, reducing its lifespan; 5. Continuous high-load operation of the alternator after starting the vehicle, which can damage the alternator if the battery remains depleted for an extended period.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.