···
Log in / Register

How to distinguish between the 2008 and 2009 Teana models?

4 Answers
Leah
07/29/25 9:37am
The methods to distinguish between the 2008 and 2009 Teana models are: 1. The 2008 Teana has 3.5L VIP and 2.5L Zunya models, while the 2009 model only has the 2.5L VIP variant; 2. The rear emblem of the 2008 Teana reads '250XV', whereas the 2009 model's rear emblem is '2.5XV'. The Teana features a four-door, five-seater sedan body structure with dimensions of 4901mm in length, 1850mm in width, and 1450mm in height. It has a wheelbase of 2825mm, front and rear track widths of 1620mm, a fuel tank capacity of 61.3 liters, a trunk volume of 586 liters, and a curb weight of 1456kg.
Was this review help?
14
2
Share
OWillow
08/12/25 10:42am
As someone who has long followed the evolution of car designs, I'm quite familiar with the differences between the 2008 and 2009 Nissan Teana models. The most noticeable changes are in the exterior. The 2008 version features a more rounded front grille, giving it a conservative look, while the 2009 model adopts a sharper design with more angular lines, appearing more modern. Another key difference is in the taillights—the 2008 model uses conventional bulbs with average brightness, whereas many 2009 variants upgraded to LED clusters, offering better visibility at night and improved energy efficiency. The 2009 model also underwent subtle adjustments to its body contour, with more pronounced side character lines, making the car look sportier and younger. Inside, the 2009 version saw minor refinements in dashboard and center console materials, feeling slightly more refined to the touch, though the changes aren't drastic. To tell them apart in person, it's best to examine the front grille or take photos for comparison—the 2008 model resembles a稳重的大叔 (steady uncle), while the 2009 version carries a时尚劲儿 (fashionable edge). These small tweaks significantly enhanced its辨识度 (distinctiveness).
Was this review help?
3
0
Share
Expand All
VanSienna
10/06/25 6:45am
I've driven quite a few used cars, and studying the differences between the 2008 and 2009 Teana models is quite practical. Focus on interior changes: the 2008 model's seat material is thicker but less ergonomic than the 2009 version, which features redesigned seats with softer padding that reduces back fatigue on long drives. There are also tech differences—the 2008 model's stock audio system is basic, lacking Bluetooth, while the 2009 adds Bluetooth calling support, making phone use easier and enabling music streaming. The 2009's instrument cluster layout was slightly tweaked for clearer info display. Rear legroom is marginally better in the 2009, offering more flexibility for families. Externally, check the design around the front logo: the 2008 looks plainer, whereas the 2009 adds chrome accents for extra shine. When buying used, don’t just check the year—test-drive or inspect the manual. The 2009’s refinements genuinely improve the driving experience.
Was this review help?
4
0
Share
Expand All
GageMarie
11/19/25 8:13am
As someone familiar with cars, I often pay attention to configuration upgrades. The main differences between the 2008 and 2009 Teana models lie in their tech features. The base 2008 version lacked a navigation system, while many higher-trim 2009 models added a small-screen navigation system, making it easier to find routes while driving. Bluetooth connectivity also became standard starting with the 2009 model, making hands-free calling more practical. The engines were essentially the same VQ series with similar tuning, but the 2009 version might have had minor optimizations, resulting in slightly better fuel efficiency. The interior control buttons in the 2009 model were more ergonomically placed, offering more intuitive operation. To tell them apart, look at the center console: the 2008 version had scattered buttons, while the 2009 version integrated them better. Overall, the 2009 model's small improvements enhanced convenience, making it worth paying extra attention to the spec sheet.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

At what tread depth should tires be replaced?

Tires should be replaced when the tread depth is less than 2.5mm. A tread depth standard greater than 3.5mm is considered good condition, while between 2.5mm and 3.5mm is normal. When it reaches the minimum limit of 1.6mm, replacement is mandatory. Key considerations for tire replacement include: 1. Selecting tires of the same specification; 2. Replacing the valve stem simultaneously; 3. Paying attention to installation direction and inflation; 4. Checking tire pressure; 5. Performing a four-wheel alignment after replacement. The functions of tires are: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving to prevent severe vibrations from damaging automotive components.
16
5
Share

Is a Lighter Prone to Explode in a Car?

Lighters are prone to explode in cars. The reason for this is: lighters contain pressurized gas. If placed on the dashboard or instrument panel where they are exposed to direct sunlight, the gas inside the lighter will continuously expand after prolonged exposure to heat. Upon reaching a critical point, an explosion can occur, which may cause severe damage to the vehicle. The main component of lighters is liquid butane, which is highly flammable and explosive. At normal room temperature of 20°C, it can explode. When a lighter is placed in an environment exceeding 55°C, its volume will expand. It is recommended that drivers who have the habit of smoking while driving should remember to take their lighters with them when exiting the vehicle to avoid potential hazards.
10
2
Share

How to Turn Off the Auto Start-Stop Function on a Cadillac XT5?

To turn off the auto start-stop function on a Cadillac XT5, simply press the auto start-stop switch. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. Taking the 2021 Cadillac XT5 as an example, its body dimensions are: length 4813mm, width 1903mm, height 1682mm, with a wheelbase of 2857mm. The 2021 Cadillac XT5 features a MacPherson strut front suspension and a five-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
8
3
Share

Can a car battery be charged directly in the vehicle when it's dead?

When a car battery is dead, it can be charged directly in the vehicle. During engine startup, the starter draws a significant current, which a regular charger cannot supply. If the battery is completely dead, the car won't start. However, if the engine can be started, the alternator will then charge the battery. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system during engine startup; 2. Supplying power to vehicle electrical equipment when the engine is off or idling at low speed; 3. Assisting in powering electrical devices when the alternator's output is insufficient; 4. Absorbing voltage spikes in the electrical system to protect electronic components; 5. Storing excess electricity generated by the alternator.
5
3
Share

What are the two common cooling methods for engines?

Engines generally have two cooling methods: air cooling and water cooling. Air cooling involves numerous cooling fins on the engine block to increase the contact area with air; water cooling utilizes a cooling system where coolant continuously circulates within the engine to dissipate heat. The main components of an engine include: 1. Valve train; 2. Crankshaft connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing gas expansion that drives the piston to perform work.
17
1
Share

Can the original license plate be retained after a car transfer?

Whether the original license plate can be retained after a car transfer depends on different circumstances: 1. If both parties involved in the vehicle transfer are spouses, the original license plate can be retained; 2. If not, the license plate cannot be used on the original vehicle when the vehicle is sold and transferred normally. In this case, a new vehicle license plate must be selected during the transfer process. A vehicle license plate, also known as a car number plate and vehicle driving license, is a hard-coded plate with a unified format and style as stipulated by national vehicle management regulations. It is issued by the vehicle management authority after reviewing, inspecting, and registering the vehicle that has applied for the license plate, and it bears the registration code.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.