How to Distinguish Between National 5 and National 6 Emission Standards for Vehicles?

What kind of tape is used for temporary license plates?

Adhesive-backed tape can be used to affix temporary license plates. Temporary license plates serve as proof that a vehicle is legally allowed to drive on the road before obtaining official vehicle license plates issued by the public security traffic police department. Before obtaining the official vehicle license plates, having a temporary license plate allows the vehicle to legally drive on the road; however, it is important to note that temporary license plates also have an expiration date. Additionally, if a new car is insured but has not yet obtained an official license plate, the temporary license plate can also serve as proof for insurance claims in the event of an accident. When using temporary license plates, the following points should be noted: 1. Before a new car is registered, it must display the temporary license plate in accordance with regulations when driving on the road. 2. When affixing the temporary license plate, it must be securely attached to prevent it from falling off.

16

4

Share

What is the capacity of windshield washer fluid?

Due to variations among different vehicle models, the capacity of windshield washer fluid also differs. Compact cars typically have a capacity of 2 liters, while some vehicles may require up to 4 liters. It is essential to regularly monitor the usage of windshield washer fluid during vehicle operation and replenish it promptly. Below is an introduction to windshield washer fluid: 1. There are three types of windshield washer fluids used in vehicles: summer-use windshield washer fluid, winter antifreeze windshield washer fluid, and special-effect antifreeze windshield washer fluid. Each type serves different purposes. 2. If the windshield washer fluid in the vehicle runs out, it should not be replaced with tap water. Tap water lacks the cleaning efficacy of windshield washer fluid, and prolonged use of tap water as a substitute can affect the lifespan of the windshield and cause certain damage. Windshield washer fluid is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants, providing certain cleaning effects.

1

2

Share

What is the ECO mode in cars?

ECO refers to the car's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars adopt the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the Eco mode. However, it is unnecessary to activate Eco mode when the speed exceeds 120 km/h, during idling, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also affect the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idling or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not operate in such scenarios.

1

0

Share

How many years must a novice driver wait before driving on highways?

The latest traffic regulations stipulate that a new driver's license comes with a 12-month probationary period. During this probationary period, the driver is not permitted to drive alone on highways and must be accompanied by someone with at least three years of driving experience. Novice drivers are also required to affix or display a uniform sign at the rear of the vehicle during the probationary period. If the sign does not comply with regulations or cannot be properly identified, it will be considered as not displaying the sign, resulting in a fine of 200 yuan. Below are precautions for driving on highways: 1. Drive at low speed with high engine RPM, shifting gears only when the engine maintains above 3000 RPM. 2. For automatic transmission vehicles, you can switch to "manual mode" or use low gears for adjustment. 3. Keep the engine RPM between 3000 and 5000.

3

4

Share

Can the Throttle and Clutch Be Pressed Simultaneously?

Throttle and clutch should not be pressed simultaneously, as pressing them together is ineffective—stepping on the clutch is equivalent to shifting into neutral. When starting the vehicle, it is advisable to apply the throttle slightly before the clutch engagement point, with a moderate throttle opening being optimal. Releasing the clutch should be closely coordinated with pressing the throttle, ensuring swift and smooth movements. Below is an extended introduction: 1. The key principle of clutch operation is to follow the "fast-slow-linked" sequence when lifting the clutch pedal. When pressing the clutch pedal, the action should be decisive and fully depressed to ensure complete disengagement of the clutch. 2. The car's clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. It is positioned on the far left.

7

0

Share

How to Use the S Gear in the Honda Avancier?

S gear is the sport mode - overdrive gear, suitable for speeding or driving at high speeds. In this mode, the engine speed can rise rapidly and provide sufficient power for the car to accelerate instantly, making it a great assistant for overtaking. Here are some relevant details: 1. The S gear in a car is the sport mode, where 'S' stands for SPORT, commonly referred to as sport mode. Many performance cars are equipped with an S gear. In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high speeds for a certain period to output greater torque and thus increase the car's power. 2. In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, allowing the engine to maintain high speeds for a longer time. This enables the car to drive at low gears with high speeds for an extended period, resulting in greater torque output and acceleration. During driving, the gear lever can be pushed into the 'S' gear, which is typically used for climbing hills and quickly overtaking other vehicles.

7

2

Share

How to Distinguish Between National 5 and National 6 Emission Standards for Vehicles?

What kind of tape is used for temporary license plates?

What is the capacity of windshield washer fluid?

What is the ECO mode in cars?

How many years must a novice driver wait before driving on highways?

Can the Throttle and Clutch Be Pressed Simultaneously?

How to Use the S Gear in the Honda Avancier?

What Causes Water Streaks on New Windshield Wipers?

Should You Press the Brake or Clutch First When Decelerating a Vehicle?

What to Replace During Car Maintenance?

Abnormal Noise When Braking?