How to Distinguish Between Good and Bad Color Change Films?

1 Answers
Lynda
07/30/25 5:35am
Methods to distinguish between good and bad color change films are as follows: Price: Car owners should fully understand the price ranges of color change films in the market to avoid being deceived. Color: High-quality color change films have full and even colors, while inferior ones show uneven coloring with noticeable graininess. Texture: The thickness and toughness of the backing paper are directly proportional to the quality of the color change film. High-quality films have a fine surface and appropriate thickness, making them less prone to creases; inferior films feel rough, lack toughness, and crease easily. Smell: If a strong, irritating odor is detected upon close inspection, it is generally an inferior product. High-quality color change films usually comply with global environmental standards. Adhesive: The adhesive on high-quality films maintains strong adhesion even after multiple applications and removals, whereas inferior films show a significant decrease in adhesive strength after just one or two uses.
Was this review help?
19
0
Share
More Forum Discussions

In which year was the China V standard implemented?

China V was implemented in 2012. Here is relevant information about China V emission standards: 1. Differences from China IV: Compared to China IV standards, the new standard reduces nitrogen oxide (NOx) emissions by 25% for light-duty vehicles and 43% for heavy-duty vehicles. Taking Shanghai's annual vehicle registration volume of approximately 350,000 units as an example, it is estimated that annual NOx emissions could be reduced by about 1,000 tons from newly registered vehicles. Additionally, China's China V emission control level is equivalent to Europe's currently implemented Euro 5 emission standard. 2. Implementation requirements: The plan requires accelerating the upgrading of petroleum refining enterprises to improve fuel quality. The goal was to supply nationwide China IV-compliant gasoline by the end of 2013 and China IV-compliant diesel by the end of 2014. Key cities in Beijing-Tianjin-Hebei region, Yangtze River Delta, and Pearl River Delta were required to supply China V-compliant gasoline and diesel by the end of 2015, with nationwide supply of China V-compliant fuels to be achieved by the end of 2017.
16
4
Share

What are the differences between Haval H6 and M6?

The differences between Haval H6 and M6 are as follows: 1. Price: In terms of pure price, the M6 has a lower entry price, while in other aspects, the H6 offers more styles and richer configurations. 2. Different engines: The Haval M6 is equipped with a 1.5T turbocharged engine; the H6 is equipped with a 2.0L gasoline engine and a GW4D20 Green Jing 2.0VGT diesel engine. 3. Different transmissions: The Haval M6 uses a 6-speed manual and 7-speed wet dual-clutch transmission; the H6 uses a 7-speed dual-clutch (DCT) transmission. 4. Different dimensions: The Haval M6 has a length, width, and height of 4649mm, 1830mm, and 1705mm respectively, with a wheelbase of 2680mm; the H6 has a length, width, and height of 4640mm, 1825mm, and 1690mm respectively, with a wheelbase of 2780mm.
20
3
Share

Are Bubbles in Car Window Tint Harmful to Human Health?

Bubbles in car window tint can be harmful to human health. Health Hazards: When window tint bubbles, it releases a significant amount of formaldehyde. The sealed environment between the tint film and the glass is compromised, allowing toxic gases to escape into the car interior. Additionally, when the car is exposed to sunlight, other components such as floor mats, tint films, and interior paint coatings also release formaldehyde, increasing the formaldehyde levels inside the car. Excessive formaldehyde in the car can irritate the respiratory tract and skin mucous membranes, posing a risk to human health. Impaired Visibility: Large bubbles in the window tint can obstruct the driver's view, making it difficult to judge objects in front of the vehicle and potentially leading to accidents.
5
0
Share

What to Do If You Fail Subject 2 Four Times?

If you fail Subject 2 four times, you can still schedule one more attempt. You will only need to retake the exam if you fail five times. Below is an introduction to Subject 2: 1. Definition: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. 2. Objective: To master the basic driving operation essentials and possess fundamental vehicle control abilities; to proficiently grasp the basic methods of field and road driving within the test area, to be capable of reasonably using vehicle controls and correctly managing the vehicle's spatial position, and to accurately control the vehicle's position, speed, and route.
15
5
Share

What Causes the Abnormal Noise from the Left Rear Wheel of a Car?

Here are the specific reasons for the abnormal noise from the left rear wheel of a car: 1. Accumulation of foreign objects: Excessive accumulation of debris on the fender or sound insulation pad. When the car turns, the tire interferes with the debris, causing abnormal noise. After cleaning the fender, the tire noise disappears. 2. Loose screws: The fastening screws of the fender or sound insulation pad have come loose, causing the fender or sound insulation pad to lift. When the front wheel turns, it interferes with the lifted part, resulting in friction and abnormal noise. It is necessary to inspect the fastening condition of the fender and sound insulation pad and eliminate factors such as looseness and lifting. 3. Unauthorized modifications: Unauthorized modifications to the car tires, such as replacing them with non-original size tires. For example, widening the tires or increasing their diameter may cause interference between the tire and the car body when turning, resulting in noise. This poses a significant safety hazard, and the original size tires should be reinstalled.
14
2
Share

What are the precautions for summer tires?

Precautions for summer tires include: 1. Regularly check tire pressure: Proper tire pressure is the primary condition for ensuring normal tire operation. Additionally, as temperatures are relatively high in summer, users can appropriately reduce tire pressure, which also serves as a good preventive measure. 2. Regularly replace tires: Many users continue to use expired tires to save costs, which is actually incorrect. Tires have a certain service life and usage cycle, and should be replaced regularly according to the specifications in the car maintenance manual. 3. Wear level: Some users have poor driving habits, which significantly increases tire wear. Once the wear exceeds a certain level, the tires need to be replaced promptly. For example, if the tread groove depth does not meet the standard, the tires should be replaced immediately.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.