How to Distinguish Between Flood-Damaged Cars and Water-Forded Cars?

1 Answers
LaDonovan
07/29/25 11:28pm
Flood-damaged cars and water-forded cars can be distinguished through the following 7 methods: 1. Smell the vehicle. Normal car maintenance does not cause odors inside the car. Generally, flood-damaged cars will have a pungent fishy smell inside. 2. Check the comfort of the seats and the condition of the seat tracks and screws. Typically, flood-damaged cars are treated by removing the seats, rinsing them with clean water, drying them, and then exposing them to the sun. However, sun exposure can damage the seats, cause the foam padding to age, and reduce elasticity, making them feel harder. 3. Inspect all visible metal parts in the cabin for signs of rust. Conduct a comprehensive inspection from multiple angles to make a judgment, avoiding generalizations. 4. Check the engine compartment: Open the hood and inspect the air filter housing and intake pipes for water marks, including traces left after the water has dried. Carefully examine whether there is mud or water residue on the wiring harnesses, connectors, and other connection points in the engine compartment. 5. Check the fuse box for water marks or mud, and observe the color of the fuses. Normal fuses are silver with a good luster. Flood-damaged fuses will lose their shine, become dull, and turn gray. Additionally, inspect the untreated metal parts and screws in the engine compartment for obvious rust. If all parts of the car show such signs, the car might be flood-damaged. 6. Check the luggage compartment: Remove all the tools from the trunk and inspect for water marks or mud. Check whether the spare tire's mounting hardware and tools show signs of rust. These areas are easy to inspect, and careful examination can reveal issues. 7. Other inspections are also essential: Check the condition of the front and rear light assemblies to see if they match the car's age and if there are yellowing marks from water immersion. Also, examine the rust level of the brake discs to see if it matches the car's age, which can also serve as a reference for identifying flood-damaged cars.
Was this review help?
9
0
Share
More Forum Discussions

What does BYD's Quality Department do?

BYD's quality management department is primarily responsible for overseeing and ensuring quality. Below is an introduction to BYD: 1. Brand History: BYD Company Limited was founded in 1995, starting with a team of just over 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Originally a battery manufacturer, BYD's venture into automobile production initially positioned it as an "outsider." However, leveraging its "proprietary intellectual property" and the acquisition of Qinchuan Auto, BYD gained a first-mover advantage over other newcomers. 2. Brand Introduction: BYD Auto adheres to a development strategy of independent research, production, and branding, committed to creating affordable and high-quality vehicles for the masses. The product designs incorporate advanced international trends while aligning with Chinese cultural aesthetics.
8
0
Share

Can I go back and modify the wrong answers in the Subject 1 exam?

You cannot go back and modify the wrong answers in the Subject 1 exam of the driver's license test. Answer feedback in Subject 1: In the Subject 1 exam, as soon as the user clicks on the next question, the system will immediately display whether the previous answer was correct or incorrect. There is no prompt for correct answers, but incorrect answers will be automatically flagged as wrong. Users can still modify their answers as long as they have not clicked on the next question. Introduction to Subject 1: The total time for the Subject 1 exam is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points and a passing score of 90. The exam questions are randomly selected and combined by the computer driver's license test system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations".
7
2
Share

How Many Years Can Winter Tires Last?

Tires typically have a service life of around 5 years, with the exact duration depending on driving habits, temperature, and environmental conditions. As rubber products, tires generally last 5 to 6 years before aging occurs, leading to surface cracks that increase the risk of blowouts. Check for tread cracks: Regularly inspect tire surfaces for cracks, deformations, or other defects. The tread grooves gradually wear down over time - when completely worn, the tire loses its water drainage and anti-skid capabilities, significantly reducing vehicle performance. Even minor cracks can become potential hazards for blowouts during high-speed driving. Additionally, remember to promptly remove small stones lodged in the grooves. Park on level ground: Avoid parking on surfaces with large, sharp, or jagged stones. Never park near or in contact with petroleum products, acidic substances, or other materials that may deteriorate rubber. Drivers should also avoid turning the steering wheel after parking, as this accelerates tire wear.
14
1
Share

Where to Pour Hot Water When the Handbrake is Frozen?

Do not use hot water to pour on a frozen handbrake. Engage the reverse gear: If the weather is not too severe and there are no obstacles behind or around, you can engage the reverse gear, step hard on the accelerator to reverse, forcing the brake to release. This method is relatively simple and rough, but it consumes more fuel. Pour hot water on the brake discs: If the freezing is more severe, you can pour hot water on the brake discs of the two rear wheels to slowly melt the ice and snow. During this process, you can use a wooden stick to gently tap a few times to speed up the thawing process. Do not apply the handbrake: When parking on a flat road, try to avoid using the handbrake. For automatic transmission vehicles, as long as the gear is in P (Park), not applying the handbrake is also fine. If parking on a slope, you can place bricks behind the wheels to prevent the car from sliding.
6
1
Share

What is the ground clearance of the 2021 Honda CR-V?

2021 Honda CR-V has a minimum ground clearance of 137mm. Here is some relevant information: 1. Minimum Ground Clearance: The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. 2. Vehicle Appearance: The 2021 Honda CR-V features a redesigned bumper, now available in silver or gray. Other exterior updates include a black radiator grille, taillights, and rear hatch. The VTi-X and VTi-L-AWD models come with new 18-inch alloy wheels, while the flagship VTi-LX-AWD model is equipped with more premium 19-inch Y-spoke alloy wheels.
8
5
Share

What do you think of Peugeot's new logo?

Peugeot's new logo has a more three-dimensional overall design. Here are the specific details about the logo: 1. Brand: Dongfeng Peugeot is a brand under Dongfeng Peugeot-Citroën Automobile Company Ltd. In October 2002, Dongfeng Motor Corporation and French PSA Group (Peugeot Citroën Group) signed an expanded cooperation joint venture contract. The two major groups joined forces to fully implement a new blueprint for introducing the Peugeot brand into China, giving birth to Dongfeng Peugeot. 2. Logo: Peugeot has launched a new logo, marking the 11th update in the brand's history. The 11th-generation logo still features a lion—the main body is a majestic lion's head with an outer shield-shaped contour design. The all-new Peugeot 308, which will be the first model to feature the new logo, is set to debut in Europe on March 18.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.