How to Distinguish Between Different Generations of Accord?

1 Answers
BriellaMarie
07/30/25 10:08am
The generations of Accord can be distinguished by their production years. Here are the specific details: 1. The first generation was produced from 1976 to 1980; 2. The second generation from 1981 to 1984; 3. The third generation from 1985 to 1988; 4. The fourth generation from 1989 to 1992; 5. The fifth generation from 1993 to 1998; 6. The sixth generation from 1999 to 2002; 7. The seventh generation from 2003 to 2007; 8. The eighth generation from 2008 to 2013; 9. The ninth generation from 2013 to 2017; 10. The tenth generation started production in 2018. The ninth-generation Accord has three model years: 2014, 2015, and 2016. Starting from the ninth generation, the 2.0L and 2.4L models were equipped with CVT transmissions, while the 3.0L model still used a 6-speed automatic transmission. The ninth-generation Accord features more prominent chrome trim, a one-piece lower grille, with the 2016 model having the most significant changes.
Was this review help?
7
1
Share
More Forum Discussions

How to Connect Bluetooth in Chery Sedan?

Chery sedan Bluetooth connection method: 1. Turn on the Bluetooth function of both the mobile phone and the car Bluetooth device, and set the mobile phone Bluetooth to "Visible to All" or "Open Detection" in the settings; 2. Search for Bluetooth devices on the mobile phone, select the found device for pairing connection, the pairing password is: 0000, after completing the pairing, the connection is successful. After the car Bluetooth and mobile phone Bluetooth are successfully paired and connected, you can make and receive calls and listen to music on the car Bluetooth. Chery Automobile Co., Ltd. is a state-controlled enterprise engaged in automobile production, and the company's products cover passenger cars, commercial vehicles, mini vehicles and other fields.
7
4
Share

Which country does Borgward belong to?

Borgward is a German brand, founded in 1919 by German engineer Carl Borgward. In 2016, Borgward launched its first SUV, the BX7, in the domestic market, followed by the BX5, BX7 TS, BXi7, and BX6, forming a comprehensive SUV product lineup. The Borgward BX7 is equipped with a 2.0L turbocharged direct-injection engine, delivering powerful performance with 165kW and 300Nm. The Borgward 4MAX intelligent all-wheel-drive system features an advanced electronically controlled multi-plate clutch and an optional eLSD electronic limited-slip differential. By dynamically distributing driving force in real-time, it significantly enhances the vehicle's handling and off-road capability across various terrains while improving safety during cornering and on slippery surfaces such as rain or snow.
8
2
Share

How to Switch Between Cold and Warm Air in Car Air Conditioning?

Methods for switching between cold and warm air in car air conditioning: To activate cold air, adjust the air conditioning button to the blue zone and press the AC switch; To activate warm air, adjust the air conditioning button to the red zone without turning on the AC, simply adjust the air outlet direction. Warm air is generated using the car's own heat cycle, and it is not advisable to turn on the warm air immediately after starting the car. The car air conditioning system, abbreviated as car AC, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to a suitable state, providing a comfortable riding environment for passengers and reducing travel fatigue. The car air conditioning system includes refrigeration devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure for easy operation.
19
4
Share

How to Install External Tire Pressure Sensors?

Installation method for external tire pressure sensors: 1. Remove the dust-proof gasket of the tire pressure sensor, then use a nut wrench to unscrew the outer shell, revealing the button battery inside the sensor; 2. Unscrew the dust cap of the tire valve and slide on the dust sleeve, install the hexagonal nut, mount the tire pressure sensor, and tighten it with a nut wrench to complete the installation of one sensor. The Tire Pressure Monitoring System (TPMS) can automatically monitor various tire conditions in real-time by recording tire rotation speeds or through electronic sensors installed in the tires, providing effective safety protection for driving. TPMS can be divided into two types: 1. Indirect TPMS, which determines tire abnormalities through differences in tire rotation speeds; 2. Direct TPMS, which installs four tire pressure monitoring sensors inside the tires to automatically monitor tire pressure and temperature in real-time, whether the vehicle is stationary or moving, and issues timely alerts for high pressure, low pressure, or high temperature to prevent traffic accidents caused by tire failures, ensuring driving safety.
20
5
Share

What is the comprehensive fuel consumption of the Qashqai?

The comprehensive fuel consumption of the Qashqai is around 9 liters. Below is some related information about the Qashqai: 1. Advantages of the Qashqai: The Qashqai, meaning 'urban nomad,' is the first work of Nissan's European Design Center, positioned between a compact SUV and a hatchback. It offers accurate and comfortable handling, good fuel efficiency, and high safety performance. The exterior is stylish and avant-garde, the interior is simple and elegant, with decent craftsmanship and materials, and generally practical configurations. The center console design is simple, with reasonably laid-out buttons and a good tactile feel. 2. Fuel consumption of the Qashqai: It is economical in fuel consumption, with most average fuel consumption figures ranging between 8.5-10L per 100 kilometers. The comprehensive fuel consumption is around 9 liters.
12
5
Share

What are the requirements for installing a home charging station?

The requirements for installing a home charging station are: 1. You need to have a fixed parking space in the residential area and communicate with the property management in advance. 2. Provide relevant materials to the local power company to apply for an electricity meter. 3. Check whether the parking space can be connected to the State Grid's power lines. The process for installing a home EV charging station: 1. Confirm charging conditions: First, determine whether there is a fixed parking space in the community and whether the property management agrees to the installation. 2. Apply for a power supply plan: After signing the car purchase contract, you or the 4S store can apply to the local power supply company for electricity installation. Once the power supply company provides a power supply plan, complete the procedures within the validity period. 3. Installation and construction: After confirming the power supply plan, you can proceed with the charging facility construction. Note that the charging station model must comply with national requirements, and choose the most suitable charging equipment for your EV brand. 4. Apply for inspection: After the charging station installation is completed, you can apply for inspection from the power supply company. Upon passing the inspection, the power supply company will complete the meter installation and power connection.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.