How to Dispose of Waste Tires?

What Causes Loud Engine Roaring When Accelerating?

Car accelerating with loud engine roaring may be caused by incorrect engine oil type, engine overheating, etc. Specific causes and solutions are as follows: Incorrect engine oil type: Using incorrect, counterfeit, or low-quality engine oil can severely damage the engine, resulting in loud roaring when accelerating. The solution is to visit an authorized shop and replace it with genuine engine oil. Engine overheating: Engine overheating leads to power loss. If the engine operates for extended periods causing surface overheating, the cooling system may fail. The solution is to inspect and repair the cooling system.

3

Share

Should You Grip the Steering Wheel Tightly While Driving?

It is incorrect to grip the steering wheel tightly while driving. Correct way to hold the steering wheel: Tight gripping can lead to excessive or uncontrolled force, resulting in loss of control over the steering wheel. If the grip method is incorrect, it poses significant hidden dangers and increases the risk of driving. Hands must firmly grip the steering wheel because it is the most critical element for the driver and should never be relaxed. In emergencies, losing grip on the steering wheel is extremely dangerous. The safest and most standardized grip is with both hands firmly positioned at the 9 and 3 o'clock positions. Driving precautions: Fasten your seatbelt. The first thing to do after getting in the car is to fasten your seatbelt, and don't forget to remind your family or friends to do the same. Regularly check your vehicle's condition. Even if the vehicle undergoes regular maintenance, you should frequently inspect its condition yourself, checking if components, tires, lights, fluids, etc., are functioning properly. Address any issues promptly. Never run a red light. Traffic laws are now strict, with severe penalties for running red lights, making it rare. However, the purpose is solely to ensure safety. Avoid unnecessary overtaking. Do not attempt to overtake just to save a little time, especially when behind large vehicles that block your view ahead. Overtaking in such situations is highly dangerous as it's impossible to determine if there's oncoming traffic.

2

Share

How Many Days Does It Take to Complete the Course Hours for Subject 2?

For the Subject 2 test of C1 and C2 driver's licenses, a total of 26 course hours are generally required, including 2 hours for theoretical knowledge and 24 hours for practical operation. Subject 2 Review Time: Under fast circumstances, the review of Subject 2 course hours takes 1-2 working days, but in most cases, it takes 3-7 days to complete the review. Only after accumulating sufficient course hours and passing the review can you book the Subject 2 test; otherwise, the system will prompt "Not Trained" when making an online reservation. Learning Content: The learning for Subject 2 is also divided into theoretical knowledge and practical operation. Theoretical knowledge includes basic driving operation norms and site driving knowledge, usually arranged for 2 hours of learning. Practical operation involves basic driving skills such as driving posture, getting in and out of the car, starting and stopping, as well as learning the test items for Subject 2.

9

2

Share

Are radar detectors allowed to be installed in 2021?

There are no explicit legal provisions prohibiting radar detectors, so they can be considered not illegal. However, some regions may prohibit their use. Reasons for prohibition: The installation and use of "radar detectors" can interfere with the normal operation of traffic monitoring equipment and the reception of signals from such devices. Therefore, for safety reasons, some regions prohibit their use. After installing radar detectors, some drivers may drive recklessly at high speeds and suddenly brake before speed detection points to evade monitoring, which is clearly detrimental to safe driving. This behavior can easily lead to unnecessary traffic accidents, as sudden braking may cause following vehicles to fail to react in time, resulting in rear-end collisions. This is also why some regions do not allow the use of radar detectors. Introduction to radar detectors: With the strengthening of traffic monitoring measures, many private car owners have purchased radar detectors or GPS navigation devices with electronic eye detection functions to reduce the number of traffic tickets. The main purpose of radar detectors is to alert drivers in advance to the presence of electronic eyes or speed detection radars, allowing them to prepare accordingly to avoid fines and penalty points for speeding or violations. The goal of radar detectors is to prevent drivers from being caught and fined by traffic cameras for speeding. However, as long as drivers comply with traffic laws and drive safely, there is no need to use radar detectors at all.

11

2

Share

Where is the car's bumper located?

The car's bumper is located at the front and rear of the vehicle, referred to as the front bumper and rear bumper respectively. As an automotive component, the bumper is prone to scratches and collisions during daily driving, making it one of the most frequently repaired parts. Functions of the bumper: The bumper serves as a device to absorb and mitigate external impacts during collisions, providing a cushioning effect to protect both the vehicle and its occupants. In addition to maintaining its original protective function, modern vehicle bumpers also aim for harmony and unity with the car's body design while pursuing lightweight construction. Most passenger car bumpers are made of plastic, commonly known as plastic bumpers. These consist of three main components: the outer panel, cushioning material, and crossbeam. Plastic bumpers offer strength, rigidity, and decorative appeal. From a safety perspective, they provide impact absorption during collisions, protecting the front and rear of the vehicle. Aesthetically, they integrate seamlessly with the car body, becoming an important decorative element of the vehicle's exterior. Structural composition: The outer panel and cushioning material are made of plastic, while the crossbeam is formed from cold-rolled steel sheets approximately 1.5mm thick, pressed into U-shaped channels. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the vehicle's frame rails with screws for easy removal. The plastic used in these bumpers primarily consists of polyester and polypropylene materials, manufactured through injection molding. Bumper modifications: Adding protective bars to front and rear bumpers: Many car owners choose to install additional protective bars on their bumpers during modifications. This modification involves minimal changes to the original components, and the protective bars are relatively inexpensive compared to full bumper replacements, with moderate technical requirements. This makes it suitable for enthusiasts who enjoy modifications but lack extensive knowledge, while also improving safety and visual appeal. Installing 'body kit' components on original bumpers: This is another common method of bumper modification in daily driving scenarios. The Mercedes AMG kit serves as a representative example. These modifications are performed on the original bumper structure, with relatively simple installation processes that can give the vehicle a more aggressive and sporty appearance. Painting additional colors on original or modified bumpers: Some car enthusiasts may choose to paint different colors on their original bumpers or added protective bars. This type of modification covers a larger area and offers more personalization. However, owners are advised to consult relevant traffic authorities before proceeding to avoid potential legal issues.

18

3

Share

How fast can a 1000w motor run?

1000w motor can run at a speed of 48-50 kilometers per hour. Motor (English: Electric machinery, commonly known as "motor"): It refers to an electromagnetic device that realizes the conversion or transmission of electrical energy according to the law of electromagnetic induction. In the circuit, the motor is represented by the letter M (the old standard uses D), and its main function is to generate driving torque as the power source for electrical appliances or various machinery. The generator is represented by the letter G in the circuit, and its main function is to convert mechanical energy into electrical energy. Classification by working power supply type: Can be divided into DC motor and AC motor. DC motors can be divided according to structure and working principle: brushless DC motor and brushed DC motor. Brushed DC motors can be divided into permanent magnet DC motors and electromagnetic DC motors. Electromagnetic DC motors can be divided into series-wound DC motors, shunt-wound DC motors, separately excited DC motors, and compound-wound DC motors. Permanent magnet DC motors can be divided into rare earth permanent magnet DC motors, ferrite permanent magnet DC motors, and alnico permanent magnet DC motors. Among them, AC motors can also be divided into single-phase motors and three-phase motors. Classification by structure and working principle: Can be divided into DC motor, asynchronous motor, and synchronous motor. Synchronous motors can be divided into permanent magnet synchronous motors, reluctance synchronous motors, and hysteresis synchronous motors. Asynchronous motors can be divided into induction motors and AC commutator motors. Induction motors can be divided into three-phase asynchronous motors, single-phase asynchronous motors, and shaded-pole asynchronous motors. AC commutator motors can be divided into single-phase series-wound motors, universal motors, and repulsion motors.

3

1

Share

How to Dispose of Waste Tires?

What Causes Loud Engine Roaring When Accelerating?

Should You Grip the Steering Wheel Tightly While Driving?

How Many Days Does It Take to Complete the Course Hours for Subject 2?

Are radar detectors allowed to be installed in 2021?

Where is the car's bumper located?

How fast can a 1000w motor run?

Can You Use the Emergency Lane During National Day Highway Congestion?

Is the Vehicle Annual Inspection Open During National Day?

Does the new car license plate registration require the owner to be present?

How many kilometers can 28 liters of oil run?