How to Display Tire Pressure on BYD Song?

2 Answers
DeAlejandro
07/29/25 12:30pm
To display the tire pressure on BYD Song, you need to adjust it using the function keys on the steering wheel. Tire Pressure Fault Light: When the tire pressure fault warning light flashes rapidly, and one or more numerical values on the tire pressure display interface of the right-side information screen turn red, it indicates that the corresponding tire is in a state of rapid air leakage. If the right-side information screen displays "Please check the tire pressure monitoring system" and the numerical values on the tire pressure display interface show "---", it means there is a fault in the tire pressure system. Tire Pressure Under-inflation Alarm: When the tire pressure of all four tires is below 75% of the standard tire pressure value and the system is in operation, the tire pressure monitoring system will issue a low tire pressure alarm signal within 1 minute. After the low-pressure alarm, please inflate the tires to the standard pressure. The low-pressure alarm will be canceled when the tire pressure exceeds 90% of the standard pressure.
Was this review help?
3
1
Share
McCorey
08/13/25 11:54pm
As a long-time BYD owner who has driven the Song model for several years, checking tire pressure is a routine task for me. First, get in the car and start the ignition, but don’t drive off immediately. Then, tap the menu button on the central touchscreen, find the vehicle settings or a similar option, and select it to access the tire pressure monitoring system, which will display the pressure values for each tire. Remember, the standard tire pressure is usually marked on the door frame or in the manual. I typically maintain mine around 2.5 bar—too high and it’s prone to skidding, too low and it wastes fuel and damages the tires. Make it a habit to check regularly, especially before cold starts in winter, to avoid alarms on the road. Plus, BYD’s system is quite smart—it beeps to alert you if the tire pressure is unstable. But checking proactively is more reassuring, and with the app, you can even track historical data. Developing this habit can extend your tire lifespan.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to activate one-touch window lift on Roewe i5?

The method to activate one-touch window lift on Roewe i5 is: The one-touch window lift button is located on the driver's side door armrest. Press this button to activate the function. Only the driver's window supports one-touch up/down operation, while other windows only support one-touch down operation. Taking the 2021 Roewe i5 1.5L Manual Platinum Edition as an example: This vehicle is manufactured by SAIC Motor, classified as a compact car with naturally aspirated engine. Its dimensions are 4607mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. The body type is a 4-door 5-seater sedan with a 5-speed manual transmission, reaching a maximum speed of 185km/h. It features ventilated disc front brakes and disc rear brakes.
20
5
Share

How to Repair a Dented Car Door Sill?

Car door sill dent repair method is: The car's rocker panel is relatively hard, so it is necessary to go to a 4S shop and have maintenance personnel use professional repair tools for the repair. The sill is located below the four car doors. After the dent is repaired, protective measures must be taken, and regular maintenance should be performed to avoid collisions that may cause deformation. The car door provides access for the driver and passengers and isolates external interference, to some extent reducing side impacts and protecting the occupants. The shape of the door is related to the aesthetics of the car, and the quality of the door is mainly reflected in its anti-collision performance, sealing performance, ease of opening and closing, and functional indicators.
1
5
Share

What to Do About Oil Leaking from the Bottom of the Cruze Engine?

The solution for oil leaking from the bottom of the Cruze engine is: drain the old engine oil, remove the oil pan and clean it thoroughly. After cleaning the oil pan, apply new sealant, then reinstall it in place, secure with screws, and fill with sufficient new engine oil. Start the engine and let it run for a while or take it for a test drive, then check again to see if the oil leakage from the bottom of the engine has been resolved. Taking the 2018 New Cruze Facelift 320 Manual Pioneer Edition as an example: this car is manufactured by SAIC-GM Chevrolet, classified as a compact car, with a naturally aspirated intake form, a maximum horsepower of 114ps, and a maximum torque of 146nm.
13
2
Share

Does stopping on the crosswalk count as running a red light?

No. If the vehicle stops on the crosswalk during a red light and remains stationary, it will not be considered running a red light. However, if the vehicle continues to proceed in violation of the rules, it constitutes running a red light, resulting in a 6-point penalty. If the vehicle crosses the stop line completely and continues moving until fully past the line, thereby affecting the passage of other vehicles or pedestrians, it will be penalized as stopping beyond the line. Crossing the stop line can be divided into two scenarios: the front wheels crossing the stop line, or the entire vehicle crossing the stop line. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states the following for motor vehicle and non-motor vehicle signal lights: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. At intersections without non-motor vehicle or pedestrian crossing signal lights, non-motor vehicles and pedestrians should follow the motor vehicle signal lights. The new traffic regulations clearly specify three necessary conditions for a vehicle to be considered running a red light: The vehicle illegally crosses the stop line. The vehicle illegally enters the intersection. The vehicle illegally crosses the opposite stop line. Electronic police (traffic cameras) capture three complete video images to determine a vehicle running a red light: an image of the violation, an image of the license plate, and a panoramic image. There are three scenarios for determining whether a vehicle running a red light is in violation: If the vehicle stops immediately after its front wheels cross the stop line or if both front and rear wheels cross but the rear does not fully pass the stop line, traffic police will not penalize it as running a red light but may penalize it for improper stopping, deducting 2 points. If the vehicle stops after its front wheels cross the stop line and then reverses, and electronic cameras capture two complete movements, it will be treated as running a red light, resulting in a 6-point penalty and a fine. If the entire vehicle fully crosses the stop line and stops or continues moving, and electronic cameras capture the three complete images constituting a red-light violation within one red-light cycle, regardless of whether the vehicle reaches the intersection or crosses the opposite stop line, it will be penalized as running a red light, resulting in a 6-point penalty and a fine. The new traffic regulations stipulate that violating traffic signal lights while driving will result in a 6-point penalty. However, not all violations will lead to a 6-point deduction. For instance, violations such as making a left turn from a straight-only lane will still be penalized under the "Road Traffic Safety Law" with a 3-point deduction for violating prohibition signs. Additionally, red-light violations recorded by cameras will only incur a fine without point deductions.
13
3
Share

What do DV and PV mean in the automotive industry?

In the automotive industry, DV and PV have the following meanings: 1. DV (Design-Verification) Testing refers to Design Verification Testing: Its purpose is to verify whether the product design meets the specified requirements. DV testing involves physical testing of pre-production or production components. 2. PV (Production-Validation) Testing refers to Production Validation Testing: Its purpose is to verify whether products manufactured using mass production processes and tooling meet the requirements. PV testing involves physical testing of mass-produced components.
3
1
Share

Is it dangerous if the cigarette lighter doesn't pop out?

The cigarette lighter not popping out can be dangerous. If it's not due to a blown fuse, it may be caused by a loose or damaged retaining spring preventing the lighter from popping out. In this case, the lighter can still heat up normally, but remaining in a continuous heating state may cause the lighter's fuse to blow. The wiring of the lighter may overheat, leading to scorching and short circuits. The cigarette lighter is a component in cars designed to provide a flame source for smokers. It serves as a device for lighting cigarettes and can also be equipped with a car power inverter to convert the vehicle's 12V, 24V, or 48V DC power into current usable by common electrical appliances.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.