How to Display the Tire Pressure Monitoring on the Lynk & Co 03?

1 Answers
FaithLynn
07/24/25 5:53pm
The tire pressure monitoring of the Lynk & Co 03 is displayed on the central screen of the instrument panel. When the tire pressure monitoring system detects abnormal tire pressure, the screen will show a warning icon and message. The working principle of the tire pressure monitoring system is that the central processing unit sends low-frequency commands through the antenna to activate the tire pressure sensors. Below is an introduction to the Lynk & Co 03: 1. Plan: As part of the Lynk & Co 03 performance enhancement plan, Lynk & Co has deeply collaborated with Cyan Racing, leveraging the performance strength of Geely Auto Group and Cyan Racing's technical expertise in the racing field to integrate the CMA basic modular architecture with racing genes. 2. Background: Lynk & Co is a premium brand of the new era jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars, combining European technology, European design, global manufacturing, and global sales. It is based on the CMA mid-size car basic modular architecture, jointly developed by Volvo Cars and Geely Auto, and led by Volvo Cars. The brand was launched in Berlin on October 20, 2016.
Was this review help?
9
2
Share
More Forum Discussions

What are the precautions for charging a car battery?

There are 4 precautions for charging a car battery: 1. Check the electrolyte level before charging. Do not charge if the electrolyte is insufficient. 2. Monitor the density and voltage of the electrolyte during charging, and check its temperature. 3. Ensure good ventilation in the charging area and strictly prohibit open flames. 4. Charging is prohibited when unattended. There are three methods to determine when charging is complete: 1. If the electrolyte boils and bubbles appear, it indicates charging is complete. 2. Measure the voltage of individual battery cells. If the voltage reaches 2.7V and does not fluctuate within 3 seconds, it indicates charging is complete. 3. Measure the relative density of the electrolyte. If the density reaches its maximum value and does not fluctuate within 3 hours, it indicates charging is complete.
20
5
Share

How many liters of engine oil should be added to the Highlander?

The Highlander should be filled with approximately 4.5L of engine oil, based on the dipstick's scale. Engine oil serves multiple functions such as lubrication, cleaning, cooling, sealing, wear reduction, rust prevention, and corrosion protection for the engine. Here are some additional details: 1. The engine is the heart of a car, containing many metal surfaces that move against each other. These components operate at high speeds, in harsh environments, and can reach temperatures between 400°C to 600°C. Under such severe conditions, only qualified lubricating oil can reduce wear on engine parts and extend their service life. 2. Engine oil consists of base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, providing new properties and playing a crucial role in the lubricating oil.
11
2
Share

What Causes CVT Transmission Failure?

Here are the reasons for CVT transmission failure: 1. Insufficient or excessive oil pressure causing transmission chain damage or slippage. 2. Abnormal torque converter lock-up circuit leading to engagement and release issues with the transmission's lock-up clutch. 3. Improper oil pressure in the forward clutch causing engagement and release malfunctions. 4. Low fluid level, which can result in chain slippage and abnormal noises during acceleration, eventually damaging the transmission. 5. Bearing failure causing abnormal noises in the transmission during acceleration. CVT transmissions are continuously variable and typically use a combination of pulleys and a steel belt to change gear ratios. However, after prolonged use, the steel belt may start to slip, leading to more issues such as abnormal noises and reduced power.
1
3
Share

How to Open the Engine Hood?

Car engine hood switches are divided into pull-handle type and button type. Here are the detailed steps: 1. Locate the switch: The engine hood switch for almost all vehicles is located on the left panel of the center console. Some models have it positioned lower, at the bottom left corner, closer to the left foot. 2. For pull-handle type switches, simply pull it firmly; for button type switches, just press it. After completing the first step, the car's engine hood will slightly pop up, revealing a gap of about 3-5 cm. 3. At this point, the engine hood is not fully open. There is still a safety latch underneath the middle of the hood. To fully open the engine hood, you must reach in and pull the safety latch before lifting the hood. 4. After opening the engine compartment hood, take out the engine hood support rod, insert one end of the support rod into the support slot to hold up the engine compartment hood. If the hood is equipped with hydraulic support, there is no need to manually prop it up.
1
2
Share

When to Use the S Gear in a Car?

S gear is used in the following situations: 1. When overtaking, the S gear will maintain a low gear for an extended period to increase fuel supply, resulting in faster acceleration. 2. When climbing a slope, similar to overtaking, using the S gear provides more power and makes the climb easier. 3. It can also be used when needing to clean carbon deposits, as it increases the engine load in a short time, raising the internal temperature to help remove carbon deposits. Below is an introduction to the S gear: The S gear is a setting that keeps the engine at high RPM, with the transmission shifting up later and downshifting earlier. This gear enhances the car's dynamic performance but consumes more fuel.
11
1
Share

How much does the Volkswagen Magotan weigh?

Volkswagen Magotan weighs between 1470-1550 kilograms. The Magotan originates from the Future B6, which is closely related to the Passat B6, and it is the first B-segment sedan to be produced and sold by FAW-Volkswagen since its establishment. Below are some extended details about the Magotan: 1. The Magotan is positioned as a mid-size sedan. In terms of body dimensions, its length, width, and height are 4866/1832/1464mm respectively, with a wheelbase of 2871mm. 2. The 1.8TSI engine equipped in the Magotan is the latest generation engine from Volkswagen Germany, incorporating the most advanced engine technology currently available internationally and leading the development trend of gasoline engines. The new 1.8TSI engine perfectly combines turbocharging technology with gasoline direct injection technology, enabling it to deliver greater power and better torque characteristics.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.