How to Display the Remaining Fuel Level in a BMW 3 Series?

1 Answers
AubreyFitz
07/29/25 4:39pm
The remaining fuel level in a BMW 3 Series is displayed on the fuel gauge located on the far left side of the dashboard, where 0 indicates an empty tank and 1 represents a full tank. BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle lineup includes the i, X, Z, and pure numerical series (1, 2, 3, 4, 5, 6, 7, 8). Below is an introduction to BMW: 1. Logo Meaning: B.M.W. stands for Bayerische Motoren Werke, and the logo's colors and design are derived from the coat of arms of Bavaria, where BMW is headquartered. 2. Brand Honors: On December 18, 2018, the "2018 World's 500 Most Influential Brands" list compiled by the World Brand Lab was announced, with BMW ranking 16th.
Was this review help?
8
1
Share
More Forum Discussions

What causes the intermittent sound issue in Superb's audio speakers?

Superb's audio speakers may produce intermittent sound due to the following reasons: Poor sealing leading to moisture: Although the speaker interior is enclosed, if the seal is not tight, moisture may enter during car washing or water vapor may exist in the internal space. This vapor can easily cause contact point dampness, resulting in malfunction. Poor contact at electromagnetic coil terminals: Some speakers use aluminum rivets for pressure connection of enameled wire terminals in the internal electromagnetic coil instead of secure welding. If the insulating varnish on the wire ends isn't properly treated or the rivet connection is loose, it may cause intermittent contact failure, leading to poor speaker performance. This is a manufacturing defect and can only be resolved by replacement. Contact point erosion: Prolonged horn usage can cause contact point erosion, increasing resistance. This reduces current flow through the electromagnetic coil, weakening magnetic attraction and preventing proper armature movement for diaphragm vibration. This results in hoarse sound or complete failure. However, momentary strong current during horn activation may temporarily overcome the resistance, causing intermittent functionality.
2
3
Share

What are the causes of the shifting mechanism failure in the Viano?

The causes of the shifting mechanism failure in the Viano are as follows: Clutch-related issues: Clutch malfunction can lead to insufficient clutch disengagement travel, resulting in incomplete clutch separation and difficulty in shifting gears. In such cases, it is recommended to visit a repair shop to adjust the disengagement travel. If the self-locking force of the clutch gear is too high, making it difficult to engage or disengage gears, it is advisable to have the clutch and cable adjusted at a repair shop. If the transmission plate assembly of the clutch is deformed due to certain reasons, causing poor separation, it is recommended to replace it with a high-quality pressure plate that matches the original vehicle. Transmission-related issues: The transmission fluid needs to be replaced. To some extent, the gear oil in the transmission requires regular replacement. If not replaced in time, its lubrication effectiveness will significantly decrease, leading to a substantial increase in shifting resistance and resulting in rough gear changes. Cold weather shifting can also make the gears feel stiff, as the viscosity of the gear oil in the transmission does not reach its optimal state in low temperatures, naturally reducing lubrication effectiveness and causing a jerky sensation when shifting.
6
5
Share

How to Deal with Water Marks on Paint Protection Film?

Methods to deal with water marks on paint protection film mainly include: using paint protection film maintenance fluid to remove them. This maintenance fluid has cleaning, sealing, and brightening functions, among which the cleaning function can remove rain stains and water spots. The method of use is: apply the paint protection film maintenance fluid to the water marks and wipe repeatedly. While removing the water marks, it can also have a brightening effect. Additional information: Advantages of automotive paint protection film: 1. Improve the gloss of the car body. Paint protection film can increase the gloss of the car body by 5%-20%. The transparent light cover coating of the paint protection film can effectively improve the paint's resistance to UV aging, preventing it from easily discoloring or turning yellow. 2. Excellent extensibility and super tensile strength, allowing it to perform ideally on any curved surface. 3. Good UV resistance, preventing long-term damage to the car paint and maintaining the original gloss of the factory paint. 4. Good corrosion resistance. Since car paint is exposed to the elements year-round, it inevitably faces oxidation from the air and corrosion from rain, especially acid rain. Additionally, daily hazards such as flying gravel and scratches from branches are unavoidable. Paint protection film acts as a transparent protective layer, isolating the paint from the external environment and providing effective protection for the car paint.
7
3
Share

Can You Still Drive with the Transmission Stuck in 3rd Gear?

Can You Still Drive with the Transmission Stuck in 3rd Gear? Yes, you can still drive with the transmission stuck in 3rd gear. Below is relevant information about the clutch: 1. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transferring the engine's power input to the transmission. 2. Principle of Releasing the Clutch: The principle of releasing the clutch is: "slow at first, fast in the middle, and coordinated at the end." When initially pressing down, do it quickly and fully depress the pedal in one motion. When lifting the pedal, move quickly during the free travel phase, slow down as it nears contact, pause slightly at the semi-engagement point, and then release fully. The key to this process is accurately identifying the semi-engagement point. To control the vehicle speed effectively, treat the semi-engagement point as the dividing line—move faster when lifting above it and slower when adjusting below it, choosing a speed that suits your needs.
19
0
Share

What is the fuel consumption of the Haval H5?

Haval H5 gasoline version has a fuel consumption of 10.3 liters per 100 kilometers, while the diesel version consumes 8.3 liters per 100 kilometers. Impact of driving habits on fuel consumption: Poor driving habits lead to higher fuel consumption. Habits such as prolonged idling, sudden acceleration and braking, shifting at excessively high or low RPMs, frequent speeding or extremely slow driving are major contributors to increased fuel consumption. Engine fuel consumption during idle parking is much higher than during normal driving. Therefore, it is best to turn off the engine when the vehicle is not in use for extended periods, such as waiting for someone during long stops. While driving, gentle and smooth driving techniques are the most fuel-efficient. Avoid stomping on the accelerator during starts; smooth acceleration and maintaining a steady speed are the most fuel-efficient. Impact of low-quality gasoline on fuel consumption: Using low-quality gasoline directly affects fuel consumption. If low-quality gasoline is used for an extended period, it produces more impurities compared to standard-quality gasoline, which can more easily clog the fuel system, leading to incorrect air-fuel ratios, overly rich mixtures, and incomplete combustion before exhaust, resulting in increased fuel consumption. Therefore, when conditions permit, it is advisable to refuel at reputable gas stations.
6
0
Share

What brand is WINDA tire?

WINDA is a tire brand under Wanda Boto Tire, developed by Wanda Boto Tire Co., Ltd., a subsidiary of Wanda Group. It includes a series of tires such as high-end sports series, mid-range comfort series, ultra-long wear-resistant series, SUV off-road series, and winter tire series. Wanda Boto specializes in the production of all-steel radial tires, engineering machinery radial tires, semi-steel radial tires, and light truck tires. Its brands include: WINDA, boto, wingood, Primus, YOTO Yongtong, ECED PCR, tbr, and OTR tires. Its tires are divided into passenger car tires and engineering vehicle tires. WINDA tires are mid-to-low-end tires. They are priced lower, come in diverse models, and have good load-bearing performance. They have also passed quality management system certifications such as ISO9001 and ISO14001, and have obtained multiple certifications including China's 3C, U.S. DOT, European ECE, and Gulf GCC.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.