How to Display the Odometer on the X-Trail Dashboard?

[LaElliot]

To display the odometer on the X-Trail dashboard, use the button located below the left air vent. Press it twice consecutively to show the vehicle's total mileage. Taking the 2021 Nissan X-Trail as an example, it is a compact SUV with the following dimensions: length 4675mm, width 1820mm, height 1722mm, and a wheelbase of 2706mm. The vehicle weighs 1489kg. The 2021 Nissan X-Trail features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum torque of 194Nm, and a maximum power output of 111kW. It is paired with a 7-speed continuously variable transmission.

[OBrandon]

I've always been driving the X-Trail, and adjusting the odometer is quite straightforward. After getting in the car, start the engine first, and a small display screen in the middle of the dashboard will light up showing various information. I usually sit in the driver's seat and reach for the round wheel or small button on the left side of the steering wheel. With a simple upward or downward flick, the display on the screen changes—sometimes showing the total mileage (ODO), and other times showing Trip A or B for recording shorter distances. It's best to do this while parked to avoid the risk of distraction while driving. I like using it to track fuel consumption after refueling or the distance of weekend trips. Each time the display changes, it's quite convenient. If you're new to this car, I recommend checking the user manual first to confirm the button's location, as the setup might vary slightly between different model years of the X-Trail, but most newer models operate this way and are simple to use.

[Javier]

As a car enthusiast, I always enjoy tinkering with these features. The key to accessing the odometer is familiarizing yourself with the dashboard controls. After starting the vehicle, the buttons on the right side of the steering wheel come into play. Locate the information toggle button, usually marked with an arrow or OK icon, and a gentle press allows me to scroll through the display to the ODO reading, which shows the total mileage. You can also switch to TRIP mode to track short distances. Before operating, ensure proper interior lighting to see the buttons clearly. If you can't access it, check if the button is stuck or consult the manual for its exact location. This feature is practical for daily use – I use it to monitor maintenance intervals. It only takes a few minutes to set up, so don't worry.

[StAlina]

When I first started learning to drive, I was completely confused by the X-Trail's dashboard, but adjusting the odometer is actually straightforward. Start the car, the dashboard lights up, look for a small button-shaped control on the steering wheel, press it or move it left/right to switch displays - the ODO number shows total mileage. Don't be afraid to experiment slowly, even beginners can easily get the hang of it. For safety, perform these operations while parked.

[KarterDella]

Helped my neighbor with his X-Trail, remember the steps to adjust the odometer: After starting, don't shift gears. There's a wheel button on the left side of the steering wheel, scroll it and the screen will switch to ODO or trip meter. That's how I taught him. Safety first when operating while parked. If it gets stuck, try restarting the car. This function is very reliable for recording distance.

[SanLena]

In my practice, adjusting the odometer is the most straightforward. Start the vehicle and the instrument panel will activate. Locate the control buttons on the steering wheel to switch the display, usually by using the up and down buttons to switch to the ODO position. When I operate it, I always ensure the environment is quiet and focus on the buttons. I usually use this to monitor driving status and timely maintenance. It's recommended to familiarize yourself with the basic buttons.