How to Display the Odometer on Honda Elysion?
3 Answers
The odometer can be displayed using the up and down buttons located at the lower right side of the steering wheel. The Honda Elysion odometer is divided into total mileage and trip mileage. To reset the trip meter, first display the trip meter, then hold down the SEL/RESET button, and the trip meter will be reset to 0.0. Below is some related information about the Honda Elysion: 1. Powertrain: The Honda Elysion is an MPV launched by Honda. It offers two powertrain options: a 2.0L and a 2.4L engine. The 2.0L version is a hybrid model, with the engine producing a maximum power of 146 horsepower and the electric motor delivering a maximum power of 184 horsepower. The 2.4L engine has a maximum power of 137 kW and a maximum torque of 243 Nm. 2. Features: The Honda Elysion is a mid-to-high-end MPV introduced by Dongfeng Honda. Positioned above the Honda Odyssey, this vehicle exudes a strong business aesthetic and features dual electric sliding doors. The interior is equipped with three rows of seats, and notably, the second-row seats can be adjusted with a lever to form a small meeting area with the third row.
I've been driving the Elysion for five years and I'm very familiar with adjusting the odometer. Look for the DISP button with a square frame icon on the left side of the steering wheel. You don't need to start the engine, just press the ignition switch to power it on. Then continuously press this DISP button, and the dashboard display will cycle through information like fuel consumption and remaining range. When the screen shows 'ODO', that's the total mileage, while 'TRIP A/B' are the trip meters. I usually reset the trip meter after refueling to check the actual fuel consumption. The operation is simple: when it's on TRIP display, just hold the DISP button for three seconds. Be careful not to operate while driving as it can be distracting; it's recommended to do it at a red light. Also, be cautious when pressing the button with wet hands on rainy days to avoid slipping. The dashboard position in this car is slightly low, so taller drivers may need to tilt their heads slightly to see the numbers clearly.
Last time I helped a friend adjust the odometer on the Elysion, I found the design quite user-friendly. When you sit in the driver's seat and power on the vehicle, the button with horizontal stripes on the left spoke of the steering wheel is the control key. Gently press it, and the LCD screen in the center of the instrument panel will sequentially display various driving data. Press it a few more times until the mileage numbers appear—ODO is the total vehicle mileage, while TRIP is the segment statistics. I usually long-press the button to reset it in the trip mileage mode, so I can accurately record the one-way distance for each road trip. However, I should remind new owners that some versions of the Elysion integrate the button at the end of the turn signal stalk, while older models might place it on the left side of the dashboard—it depends on the model year. When adjusting the odometer, the automatic brightness adjustment of the instrument panel might affect visibility, so it's recommended to increase the brightness on strongly lit roads.
