···
Log in / Register

How to Display the Fuel Consumption of Geely?

6Answers
DelElena
09/08/2025, 02:13:47 AM

You can check it by adjusting the buttons on the left side of the steering wheel. The fuel consumption display is divided into average fuel consumption and instantaneous fuel consumption. This relationship is not absolute. Under the condition that all other factors are the same, an engine with a larger cylinder volume will definitely have higher power and fuel consumption. During daily driving, the maximum RPM of an ordinary family car is only around 6000 RPM. Widening and enlarging tires increases the friction of the tires, which is equivalent to increasing the load of the car, thus directly increasing the car's fuel consumption.

Was this review help?
107
Share
Pedro
09/20/2025, 12:48:22 AM

When I used to drive a Geely, I found checking fuel consumption was actually quite simple. After starting the vehicle, just look at the instrument panel behind the steering wheel, which usually displays fuel consumption information. Some models require pressing the control buttons on the steering wheel to switch between display options, so you might need to try a few different screens. When driving on the highway, I glanced at the instantaneous fuel consumption, and the numbers fluctuated quite noticeably; for daily commuting, I was more concerned about the average fuel consumption. My experience is that holding down the instrument panel button for a long time will lock this data in display. It automatically resets after each refueling, allowing you to clearly see the fuel consumption for that tank. If you can't find the button location, checking Chapter 5 of the owner's manual will definitely have detailed diagrams.

Was this review help?
18
Share
Expand All
McFinn
11/03/2025, 12:09:43 AM

I mainly check the fuel consumption of my Geely Xingyue through the central control touchscreen. Swiping down from the top of the screen brings up the quick menu where I can find the fuel consumption statistics module. It's categorized in detail: there's current trip fuel consumption, historical average fuel consumption, and comparative data under different driving modes. In eco mode, the fuel consumption is displayed in green, while in sport mode it turns red to indicate higher consumption. I remember once during traffic congestion, the instantaneous fuel consumption spiked to 15L, so I quickly switched to start-stop mode and it immediately dropped. These statistics are really helpful for optimizing driving habits, and now I've developed the good habit of anticipating road conditions to brake less.

Was this review help?
12
Share
Expand All
MacCarmen
12/17/2025, 12:09:53 AM

When my friend first got his Geely Boyue, I helped set up the fuel consumption display. After starting the engine, first look at the LCD area on the right side of the instrument panel, then briefly press the TRIP button at the top of the turn signal stalk to switch between display information. In normal mode, pressing once shows the total mileage, pressing again switches to Trip A (single trip fuel consumption), followed by Trip B (long-term fuel consumption). The most useful is Trip A, which records single trip data. I specifically reset it when picking up my child from school to test it – 7 km of city driving showed 8.2L, which was even more accurate than the car's displayed combined fuel consumption. Note that the data resets if the engine is off for more than two hours.

Was this review help?
1
Share
Expand All
MartinLynn
02/06/2026, 01:00:47 AM

Last week, I just helped my dad adjust the fuel consumption display on his Geely Binyue. For older models with physical buttons: There's a square-labeled button on the left control area of the steering wheel—pressing it cycles through the dashboard info. Fuel data appears in the trip computer interface, where real-time consumption is dynamically shown as an intuitive bar graph. Noticed he often floors the accelerator, causing the bars to frequently hit the red zone. Taught him a trick for tracking average fuel efficiency—hold the OK button for 3 seconds when the numeric display appears to reset it, enabling precise weekend road trip calculations. After three years of use, the display now stabilizes at 7.8L. Physical buttons are indeed more user-friendly for seniors than touchscreens.

Was this review help?
14
Share
Expand All
OBeckett
05/01/2026, 04:42:46 PM

When I first got my Emgrand L, I tried using voice commands to check fuel consumption. Just say 'Hello Geely, check fuel consumption' towards the steering wheel, and the central screen immediately pops up displaying three key metrics: current fuel consumption, monthly average, and mileage since last refuel. I remember once showing it to a friend during a ride—the system reported 'This trip's fuel consumption: 6.3 liters,' which amazed my friend with its smart features. The manual query path is under Settings > Vehicle > Energy Consumption, where you can view a 30-day trend chart. Over time, I noticed a pattern: when temperatures drop below 5°C, fuel consumption rises by over 1 liter compared to summer AC usage—northern drivers should account for winter warm-up losses.

Was this review help?
2
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.