How to Disassemble the New Emgrand Key?
2 Answers
Disassembly method for Geely Emgrand car key: 1. Press the smart key switch and remove the mechanical key. 2. After removing the mechanical key, you can see an "OPEN" mark on the shell of the remote key. 3. Insert a flat-head screwdriver into the larger groove below the "OPEN" mark. 4. Turn the screwdriver to pry open the shell of the remote key. 5. After prying open the shell, continue to pry with the screwdriver. 6. After disassembly is completed, you can see all the components of the remote key. Below is an introduction to the Geely Emgrand: Geely Emgrand is a sub-brand under the Geely parent brand. The 2019 Emgrand has a body length, width, and height of 4632mm, 1789mm, and 1470mm respectively, with a wheelbase of 2650mm.
I once took apart my new Emgrand's key fob when the battery died and replaced it myself. It was pretty straightforward but required some care. The key is usually a remote type with a small gap on the back—you can look for it. I used a small flathead screwdriver to gently pry open the edge, but avoid metal tools to prevent scratches; a plastic pry tool works better. Once the back cover is open, you'll see a small coin cell battery, typically a CR2032—just pull it out and replace it. When putting the cover back, press firmly until you hear a click to ensure it's properly seated. If you apply too much force, you might damage the internal circuitry or the clips, which would be a big hassle. For your first time, take it slow and work in a well-lit area to avoid losing small parts. Don’t force it open, as the key shell can crack easily. After replacing the battery, test the remote functions to make sure everything works. If you don’t have the right tools, a basic toolkit from the supermarket should suffice.
