How to Disassemble the Baojun 630 Car Key?

[VonMadelyn]

Baojun 630 car key disassembly method is as follows: 1. Open the folding part of the key and insert a flat-head screwdriver into the horizontal slot in the groove. 2. When a larger gap is pried open, hold the key ring below and pull hard, and the key will separate into upper and lower parts. 3. Forcefully pry open the side, and this part of the key will split into front and back pieces, revealing the battery and circuit board. Remove the battery for replacement. More information about car keys is as follows: 1. Generally, the service life of a car key battery is about 2 years. If it is a remote battery with one-button start, the service life will be shorter. 2. Nowadays, car keys come in various styles, but the internal structure is the same. Remote keys basically have a mechanical key, and some keys will fold or hide the mechanical key part.

[LukeLynn]

When I drive my Baojun 630, I often disassemble the key myself, doing things like changing the battery. There's a small gap on the back of the key; just use a small tool like a screwdriver or a credit card to gently pry it open. Be careful not to use too much force to avoid cracking the plastic shell. The Baojun key has a simple structure, containing a CR2032 coin cell battery, similar to a regular remote. When replacing the battery, make sure to align the positive and negative terminals correctly, and press firmly when reassembling. If the key gets wet or collects dust, it's best to open it up and clean it early to prevent the buttons from sticking. It's a good idea to keep a couple of spare batteries in the car, as they typically last one or two years, so check them regularly to avoid remote failure. Doing it yourself feels quite rewarding and saves some money too.

[Joshua]

As a DIY enthusiast, I've disassembled many car keys, including the Baojun 630. The method is quite straightforward: locate the hidden clips on the back of the key, use a thin pry tool or blade to find the seam, and gently pry it open—avoid forcing it to prevent breaking the clips. Inside, you'll find the circuit board and a CR2032 battery; replacing it takes just a few minutes. Keys for different car models are similar, and the Baojun is relatively easy to handle. With practice, you'll get faster. I also take the opportunity to clean the button contacts to prevent oxidation and malfunction. DIY saves money and helps you understand car accessory structures—just get an inexpensive toolset. Tips: Take photos before disassembly to note the orientation, align and press firmly during reassembly, and test the remote. If you lack tools, find substitutes but prioritize safety.

[LoganRose]

When I first started learning to drive, I was a bit nervous the first time I disassembled my Baojun key. The steps are quite simple: first, locate a small groove on the back of the key. Second, gently pry it open using a card or your fingernail. Third, carefully remove the old battery and replace it with a new CR2032. Fourth, press the cover back into place. For beginners, it's safer to watch online video demonstrations. Opening it up reveals that a dead battery is often the reason for the remote's malfunction, so replacing it early avoids issues during urgent use. If you're unsure, don't force it—ask a friend for help or visit a repair shop. With a few practices, you'll get the hang of it.