How to Disassemble the 10th Generation Accord Center Console?
3 Answers
The disassembly steps for the 10th generation Accord center console are as follows: 1. First, remove the plastic strip and plastic clips on the passenger side dashboard. 2. Then take off the small cover plate of the one-button start opposite. Next, remove the right side panel and right vent assembly on the passenger side. 3. Proceed to remove the silver strip on the center console as a whole. At this point, you can see two fixing screws under the original car screen - loosen them with a screwdriver. 4. Locate the original car head unit and find the main harness connecting to the 3601 body harness. This unit is quite concealed - you must fully lower the gear decorative cover plate to see the wiring harness. 5. The silver metal box inside is the head unit. After removing all these components, locate and connect the required power supply, USB, radio antenna, radar and other original wiring harnesses.
When I first started disassembling the 10th-gen Accord's center console, I felt like a complete novice, knowing nothing. The preparation was simple: first, disconnect the negative battery terminal to prevent electric shock or short circuits, and have plastic pry tools and a Phillips screwdriver ready. There are hidden screws around the center console panel, tucked beneath the air vents or storage compartments—carefully pry open the plastic trim to locate them. After removing all the screws, gently pull out the entire unit, remembering that wiring harnesses are still connected. Take photos to note their positions before unplugging the connectors. When reassembling, take it step by step; don’t rush to push it back in, as misalignment can occur. The whole process took about half an hour, but the first time was nerve-wracking, fearing I’d damage the interior. I recommend following a tutorial video and practicing more to get the hang of it. After disassembly, you can clean accumulated dust inside, improving ventilation.
Disassembling the 10th-gen Accord's center console is so much fun—I really enjoy it as a hands-on person. Tools prepped: plastic pry tools, gloves, and a small Phillips screwdriver. First, disconnect the battery's negative terminal for safety, then gently pry open the edges of the center console panel with the pry tool. Honda's design is quite user-friendly, with easy-to-locate screw positions—once removed, the unit slides out effortlessly. Before unplugging wire harnesses, remember which connector corresponds to which function, like audio or AC controls. After disassembly, I upgraded the touchscreen, and the result was stunning. The key is to take it slow—avoid rushing or using excessive force to prevent cracking the plastic. After reassembly, test all functions to ensure everything works. Saved a ton on labor costs and picked up new skills in the process.
