How to Disassemble an Old Mercedes Remote Key?

1 Answers
JuliaDella
07/29/25 12:51pm
The disassembly method for an old Mercedes remote key is: 1. Push the small toothed switch at the end of the remote to the right and remove the mechanical key; 2. Insert a tool into the rear of the keyhole and pry to open it. Mercedes models include: Mercedes E-Class, Mercedes A-Class, Mercedes S-Class, Mercedes G-Class, Maybach, etc. Taking the Mercedes E-Class as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm. The Mercedes E-Class is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 184PS, maximum power of 135kW, maximum power speed of 5800 to 6100rpm, and is paired with a 9-speed automatic transmission.
Was this review help?
8
4
Share
More Forum Discussions

Can New Cars Be Flood-Damaged Vehicles?

New cars can indeed be flood-damaged vehicles. Specific explanations are as follows: Some unscrupulous merchants may sell flood-damaged vehicles as new cars. Therefore, when purchasing a car, it's crucial to identify whether the vehicle has been flood-damaged. You can check the fog lights, as many people replace both front and rear light assemblies when repairing flood-damaged cars, but few replace the fog lights. By examining whether there are signs of water ingress in the fog lights, you can determine if the car is flood-damaged. Here are additional methods to identify whether a new car is flood-damaged: 1. Smell the interior: Even after thorough cleaning, flood-damaged car interiors often retain a musty odor. If you detect a musty smell inside the car, avoid purchasing it. 2. Inspect the metal brackets under the seats: Check the metal brackets beneath the seats for signs of rust, which indicates water immersion. 3. Examine the seat belts: Flood-damaged seat belts often show obvious water stains and are prone to mold spots.
3
5
Share

Why Do Sports Car Exhaust Pipes Shoot Flames?

Sports car exhaust pipes shoot flames when, after heavily pressing the accelerator and suddenly releasing it, an excess of fuel-air mixture leaks into the exhaust pipe through the exhaust valve. This flammable gas is ignited by the high heat of the exhaust pipe and is forcefully expelled along with the exhaust pulse, appearing as flames shooting out from the exhaust pipe when viewed from outside the car. Here is an extended explanation: 1. Common scenarios: This phenomenon is more common in race cars or heavily modified vehicles. These cars typically have engines with high compression ratios, along with factors such as high-angle camshafts and rich fuel mixture settings, causing the exhaust pipes to shoot flames after heavy acceleration followed by sudden throttle release. 2. Modification principle: The principle involves installing a spark plug at the end of the exhaust pipe outlet. By pressing a button inside the car, it synchronously controls the fuel injectors to spray more fuel, simultaneously igniting the expelled fuel-air mixture to create flame shooting.
18
0
Share

Why Won't My Hyundai Elantra Start?

If your Elantra won't start, first check if there's power by seeing if the horn still works. If there is power, you'll also need to inspect the ignition coil, spark plugs, starter motor, flywheel ring gear, and other factors. It's recommended to take it to a 4S shop for a detailed inspection. The Elantra still uses 1.6L and 1.8L engines, but they have been recalibrated. Here are the specifications for these two engines: 1. 1.6L: The 1.6L model uses Hyundai's α-CVVT engine, with a maximum power output of 82kW at 6000rpm and a peak torque of 145.1N.m at 4500rpm. 2. 1.8L: The 1.8L model is equipped with Hyundai's β-DOHC engine. This engine can deliver a maximum power of 96kW at 6000rpm and a peak torque of 162N.m at 4500rpm.
2
5
Share

Can Xiaopeng charging piles charge other cars?

Nowadays, Xiaopeng, NIO, Tesla, and BYD have all established their own charging stations. Except for Tesla, the charging piles of the other three brands are compatible with other vehicle models. Tesla's incompatibility is due to its supercharging piles performing vehicle identification during charging; if a non-Tesla vehicle is detected, the charging pile will not supply power. Below is an introduction to Tesla vehicles: 1. Brand Introduction: Tesla is an American electric vehicle and energy company that manufactures and sells electric cars, solar panels, and energy storage devices. Headquartered in Palo Alto, it was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning. The founders named the company "Tesla Motors" in honor of the physicist Nikola Tesla. 2. Launch Timeline: Tesla's first car product, the Roadster, was released in 2008 as a two-door sports car. In 2012, Tesla launched its second car product—the Model S, a four-door all-electric luxury sedan. The third car product was the Model X, a luxury all-electric SUV, which began deliveries in September 2015. Tesla's next car, the Model 3, was first unveiled in March 2016 and began deliveries at the end of 2017.
16
2
Share

Can you still enter the examination hall if you are a few minutes late for Subject 1?

Being late for the first session of Subject 1 generally does not invalidate your exam. If you are only a few minutes late, you can ask the examiner if you can still enter the examination hall. Usually, if you are not too late, you can enter the hall normally and participate in the exam. If you are too late, you will have to wait for the next session to take the exam. Below is relevant information about the Subject 1 exam: 1. Exam Rules: The total time for the Subject 1 exam is 45 minutes. The exam paper consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90. 2. Exam Paper: The exam paper is randomly selected and combined by the computer driver's exam system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."
1
1
Share

How long does it take for speeding violations to appear on the Traffic Management 12123 app?

Speeding violations can typically be queried on the Traffic Management 12123 app within 3-7 working days. Methods for determining traffic violations: Traffic violations are detected through electronic monitoring systems. Violations captured by electronic surveillance require manual review, which usually takes about 72 hours to upload the records before they are synchronized to the Traffic Management 12123 platform. It generally takes 3-7 working days to query the violation records. Non-on-site violations: Non-on-site violations (those captured by cameras) may take up to 15 days to appear in the system. The exact timeframe varies by region. Therefore, if drivers are concerned about potential violations, they can check online for relevant information about a week after they suspect the violation occurred.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.