How to Disassemble a Dash Cam?
4 Answers
The disassembly method for a dash cam: 1. First, use a blade or card-like item to pry open the front panel, then you can see the screw holes inside the dash cam; 2. Use a screwdriver to remove the screws, and the display panel can be taken off. There are clips around it that can be pried open with a screwdriver; 3. After removing the panel, you can see the circuit board. There are four screws around the circuit board display in relatively hidden positions. After removing these, the back cover can be taken off. A dash cam is an instrument that records images, sounds, and other related information during vehicle travel. After installing a dash cam, it can record the entire process of the car's journey in video and sound, providing evidence for traffic accidents. For those who enjoy self-driving tours, it can also be used to document the process of conquering difficult and dangerous roads.
I often tinker with car accessories myself, and removing a dash cam requires patience. First, make sure the car is completely turned off and disconnected from power, unplug the cigarette lighter or connecting cable to prevent short circuits. Then, check how the dash cam is mounted: if it's suction cup-based, gently twist and remove it; for adhesive mounts, use a heat gun or hairdryer to slightly soften the adhesive before slowly prying it off. Before opening the casing, find a clean place to keep the parts, use a Phillips screwdriver to unscrew the screws—if there are no screws, it might rely on clips, so carefully pry it open with a plastic pry tool. Inside, there may be batteries and various wires—avoid touching them randomly to prevent damage. It's advisable to read the manual or search for video references before starting, as different models have different structures. After cleaning dust or replacing parts, reassemble and test if it works properly. Safety first—if you're not confident, don't force it; it's better to seek professional help.
From a safety perspective, the biggest concern when removing a dash cam is causing harm to yourself or the device. First and foremost, always turn off the engine and disconnect the power source, as automotive circuits carry high-voltage risks. Next, wear anti-static gloves or touch a metal surface to ground yourself, preventing static electricity from damaging internal components. During disassembly, observe the mounting points: for suction cup types, twist to remove; for adhesive types, use plastic tools to avoid scratching the glass. When opening the casing, apply even pressure and avoid prying forcefully to prevent cracks. Internal components like sensors and batteries are delicate, so avoid yanking on wires. If unsure, don't risk disassembly, as it may lead to permanent damage or data loss. Cleaning the lens or replacing the SD card are common needs, but average car owners should first try a soft reset to resolve issues. Remember to test all functions after reassembly and ensure everything works properly before driving.
When performing maintenance, the key to removing the dashcam lies in clear steps. After disconnecting all power sources, remove the mount fastener. Most models are secured with screws, which can be loosened with a small screwdriver; for those without screws, rely on clips and carefully operate with a plastic pry tool. Avoid touching sensitive components such as the camera or circuit board after opening the casing. Disassembly is mainly for clearing blockages or upgrading the memory card, but be cautious not to disturb internal connections. After completion, reassemble and test.
