···
Log in / Register

How to Determine Whether Tires Need Replacement

3 Answers
MacIsabel
07/29/25 10:24am
Methods to determine whether tires need replacement: 1. Check the tread depth, which is a crucial indicator for assessing tire replacement necessity; 2. Examine the degree of tire aging. The rubber material of tires has a shelf life of three years. Beyond this period, numerous small cracks will appear on the tire sidewalls - more cracks indicate more severe aging, in which case replacement is recommended. Automotive tires are one of the vehicle's critical components, directly contacting the road surface and working with the suspension system to absorb shocks during driving. They ensure good ride comfort and smooth operation, maintain excellent traction between wheels and road surface, enhance the vehicle's traction, braking, and off-road capability, while bearing the vehicle's weight.
Was this review help?
17
3
Share
DiSimon
08/13/25 2:18pm
As a DIY car enthusiast, the key to deciding whether to replace tires lies in checking tread depth and signs of aging. Insert a one-yuan coin into the tire tread—if the coin's edge is visible, it means the tread depth is below 1.6mm and replacement is mandatory. Also, check the wear indicators; if they're flush with the tread, the tire's lifespan is nearly over. Additionally, sidewall cracks or bulges signal aging, especially as summer heat accelerates deterioration. I recommend self-inspections every six months: before driving, check for uneven wear, which may indicate suspension issues. Tires typically last 4-6 years—don't exceed this. Opt for reputable brands and replace all four tires simultaneously to ensure handling stability and safe driving. Don't wait for an accident to regret neglect; regular checks proactively mitigate risks.
Was this review help?
3
3
Share
Expand All
AaronMarie
10/07/25 4:52am
As a mom who regularly shuttles kids around, I pay close attention to tire safety. Here's a simple checklist: First, tread depth shouldn't be too shallow - use a tread depth gauge or your finger to check; if you can easily feel the wear indicators, it's time for replacement. Second, aged tires often develop fine cracks on the sidewalls, which become more noticeable over time. Additionally, if you notice increased slipping or noise while driving, it indicates deteriorating tire performance. I make time monthly to walk around my car for inspection, especially before and after rainy seasons when wet roads pose higher risks. Don't cut corners when replacing tires - I recommend professional inspection at authorized repair shops to ensure proper inflation after installation. Safety comes first - this investment is worthwhile, especially when transporting precious little ones.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Is Points Deducted for Failing to Start the Engine in Subject Three?

Failing to start the engine in Subject Three deducts 10 points. The passing criteria for each subject exam are as follows: 1. Subject One: The full score for Subject One is 100 points, and a score of 90 or above is considered passing. 2. Subject Two: The full score for Subject Two is 100 points. For large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required to pass. For other vehicle types, a score of 80 or above is sufficient. 3. Subject Three: The road driving skills and safe civilized driving knowledge tests in Subject Three each have a full score of 100 points, and a score of 90 or above in each is required to pass.
11
3
Share

Does a Faulty Canister Purge Valve Affect Fuel Consumption?

The failure of the canister can affect fuel consumption. Here is a related introduction about the canister: 1. Principle and Function: The canister is actually part of the Evaporative Emission Control System (EVAP), which was introduced to prevent fuel vapors from escaping into the atmosphere after the engine stops running. Since 1995, all newly manufactured vehicles are required to have this system. After the engine is turned off, fuel vapors mix with fresh air inside the canister and are stored in the activated charcoal canister. When the engine starts, the solenoid valve installed between the activated charcoal canister and the intake manifold opens, and the fuel vapors in the activated charcoal canister are drawn into the combustion chamber by the vacuum in the intake manifold, where they participate in combustion. This not only reduces emissions but also lowers fuel consumption. 2. Working Process: Because activated charcoal has adsorption capabilities, when the car is running or turned off, fuel vapors from the fuel tank enter the upper part of the activated charcoal canister through the pipeline, while fresh air enters the lower part of the activated charcoal canister. After the engine is turned off, fuel vapors mix with fresh air inside the canister and are stored in the activated charcoal canister. When the engine starts, the solenoid valve of the fuel vapor purification device installed between the activated charcoal canister and the intake manifold opens, and the fuel vapors in the activated charcoal canister are drawn into the intake manifold to participate in combustion.
12
5
Share

What is the fuel consumption of the Kia K3 manual transmission?

The average fuel consumption of the Kia K3 manual transmission is 7.23. Here are the main factors affecting fuel consumption: 1. Maintain a reasonable driving speed: Each car has its own economical speed, at which the fuel consumption is the lowest. However, the economical speed of most SUV cars is not very high, typically ranging from 65 to 90 km/h. To reduce fuel consumption, drivers should try to control their speed within this range. 2. Environmental impact on the vehicle: Fuel consumption significantly increases in summer, mainly due to the use of air conditioning. In urban areas during summer, fuel consumption can be 20%-30% higher compared to spring and autumn, especially when the car is parked outdoors. Fuel consumption also increases during winter or in cold regions. 3. Road conditions: The impact of road conditions on fuel consumption is relatively easy to understand. Highways are more fuel-efficient than city roads; asphalt roads are more fuel-efficient than concrete roads; paved roads are more fuel-efficient than off-road surfaces.
1
1
Share

Do I need to take off my hat for Subject 2 of the driving test?

There is no strict regulation on whether you can wear a hat during Subject 2 of the driving test. However, it is best not to wear one, as a hat can obstruct your vision while driving, which can easily lead to traffic accidents. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is referred to as the field driving skill test. The teaching objectives of Subject 2 are: 1. Master the essentials: grasp the basic driving operation essentials and possess the basic ability to control the vehicle; 2. Develop skills: proficiently master the basic methods of field and on-site road driving, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
19
5
Share

What are the penalty items for straight-line driving in Subject 3?

Subject 3 straight-line driving penalty items are as follows: Direction control: During Subject 3, if the direction control is unstable and the vehicle cannot maintain a straight-line motion state during straight-line driving, it is considered a failure; Deceleration measures: During Subject 3, if the vehicle in front brakes and no deceleration measures are taken, it is considered a failure; Rearview mirror observation: During Subject 3, if the driver does not observe the traffic situation behind the vehicle through the rearview mirror for more than 20 seconds, 10 points will be deducted; Road obstacles: During Subject 3, if road obstacles are not detected in time and no timely deceleration measures are taken, 10 points will be deducted.
17
4
Share

How to Coordinate the Clutch and Accelerator in Subject Three to Avoid Stalling?

Methods for coordinating the clutch and accelerator in the driving test Subject Three: 1. Release the clutch slowly when starting: Then lightly press the accelerator to provide more starting power, making it less likely to stall. 2. Fully depress the clutch when shifting gears: Shift to second gear, then release the clutch while pressing the accelerator slightly. 3. Decelerate and downshift before turning, making a U-turn, or stopping: Only apply the brake to reduce speed to 20 kilometers per hour. 4. Maintain steady driving in second gear: Before turning the steering wheel, ensure the vehicle is steadily moving in second gear. You can lightly press the clutch to decelerate when starting the turn. 5. During the latter half of the turn: The vehicle requires more power at this stage. Besides releasing the clutch, you can appropriately press the accelerator a bit to prevent the car body from shaking due to insufficient power.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.