How to Determine Whether a Vehicle is Front-Wheel Drive or Rear-Wheel Drive?

1 Answers
SanGenevieve
07/29/25 11:47pm
Check for emblem letters on the vehicle body: FF (Front-engine, Front-wheel drive), FR (Front-engine, Rear-wheel drive), 4WD (Four-wheel drive), AWD (All-wheel drive). Below is relevant information: 1. Front-wheel drive vehicles typically have a transversely mounted engine, meaning the crankshaft is perpendicular to the direction of travel, resulting in a shorter front end. The engine bay strut towers are close to the lower edge of the windshield, and the front door hinge pillars are very close to the front wheel arches. This saves passenger space but positions the wheel axis closer to the cabin, compromising handling compared to rear-wheel drive. 2. Rear-wheel drive vehicles usually have a longitudinally mounted engine (this also includes longitudinal four-wheel drive systems). For better handling, the wheelbase is extended to the corners (four-wheel four-corner layout), sacrificing some space to improve weight distribution and handling performance.
Was this review help?
12
4
Share
More Forum Discussions

What is the SAIC Maxus MRXUS?

There is no MRXUS, it should be MAXUS, which is the logo of SAIC Maxus vehicles. Taking the 2020 SAIC Maxus D60 as an example, it is a midsize SUV with body dimensions of: length 4720mm, width 1860mm, height 1736mm, a wheelbase of 2760mm, and a fuel tank capacity of 50L. The 2020 SAIC Maxus D60 features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.3L turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, maximum torque of 230Nm, and is paired with a 6-speed manual transmission.
2
0
Share

Where is Mazda produced?

Mazda is produced in Japan. Mazda is a Japanese automobile manufacturer headquartered in Hiroshima, Japan. Mazda's models include: Mazda CX-4, Mazda CX-5, Mazda CX-8, Mazda Atenza, Mazda 3 Axela, etc. Taking the 2021 Mazda 3 Axela as an example, it belongs to the compact car category with body dimensions of: length 4662mm, width 1797mm, height 1445mm, and a wheelbase of 2726mm. The 2021 Mazda 3 Axela is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117PS, a maximum power of 86kW, a maximum torque of 148Nm, and is paired with a 6-speed manual transmission.
14
4
Share

What is the engine oil specification for the Trumpchi GA8?

The engine oil specification for the Trumpchi GA8 is 5W30. Generally, the engine oil should be replaced every 5,000 kilometers. If synthetic oil is used, it should be replaced every 7,000 kilometers. Taking the 2020 Trumpchi GA8 as an example, it is a mid-to-large-sized sedan with body dimensions of 5003mm in length, 1868mm in width, and 1505mm in height, with a wheelbase of 2900mm. The 2020 Trumpchi GA8 is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 252PS, a maximum power of 185kW, and a maximum torque of 390Nm, paired with a 6-speed automatic transmission.
9
0
Share

Where is the cigarette lighter in the Trumpchi GM6?

The cigarette lighter in the Trumpchi GM6 is located below the car's center console. The method of using the cigarette lighter is as follows: 1. Insert the cigarette lighter into the car's power socket; 2. Press down and hold it in place. When the heating wire of the cigarette lighter reaches the required temperature, it will automatically pop out; 3. After use, return the cigarette lighter to the power socket position. Taking the 2021 Trumpchi GM6 Manual Elite Edition as an example, its body structure is a five-door seven-seat MPV, with body dimensions of: length 4780mm, width 1837mm, height 1730mm, a wheelbase of 2810mm, a fuel tank capacity of 52 liters, and a trunk capacity of 324 liters.
10
1
Share

How to Fold the Rearview Mirrors on the Lamando 280?

The method to fold the rearview mirrors on the Lamando 280 is: 1. Press the rearview mirror folding switch located on the front left door armrest of the driver's seat; 2. Press the edge of the rearview mirror. Taking the 2021 Lamando 280 as an example, it is a compact car with body dimensions of length 4615mm, width 1826mm, height 1425mm, and a wheelbase of 2656mm. The 2021 Lamando 280 is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
6
5
Share

What Causes the Steering Wheel to Become Heavier After Wheel Alignment?

The reasons for the steering wheel becoming heavier after wheel alignment are: 1. Improper adjustment of the front wheel toe; 2. Excessive adjustment angle of the front wheel toe; 3. Lack of power steering fluid; 4. Loose or broken power steering pump belt. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Precautions for using the steering wheel include: 1. Do not turn the steering wheel too forcefully or make sudden turns; avoid turning the steering wheel when the vehicle is stationary; 2. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and accidents; 3. Reduce speed when turning; 4. Gradually turn the steering wheel according to the curvature of the bend when entering a curve.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.