How to Determine When to Replace Spark Plugs?

1 Answers
JaxsonDella
07/24/25 9:27pm
Methods to determine when to replace spark plugs: 1. Difficulty in starting the vehicle, caused by excessive carbon buildup on the spark plugs leading to increased spark plug gap, resulting in abnormal vehicle startup; 2. Reduced engine power, leading to decreased performance; 3. Incomplete combustion of the air-fuel mixture in the engine, causing excessive exhaust emissions; 4. Increased fuel consumption due to incomplete fuel combustion, resulting in higher-than-normal fuel consumption. Spark plugs are a key component of a car engine's ignition system. Gasoline engines are equipped with spark plugs, one per cylinder, and some high-speed gasoline engines even have two spark plugs per cylinder.
Was this review help?
17
3
Share
More Forum Discussions

How to Repair Car Window Film?

Generally, it is not easy to repair damaged car window film, and it is recommended to replace it with a new one. During daily use, proper maintenance of the car window film is necessary to avoid damage that could affect the vehicle's aesthetics. Below are the acceptance criteria for car window film installation: 1. After installation, the owner should first verify whether the correct film material has been used. If any discrepancies are found, address them promptly to avoid further issues. 2. Inspect the windshield: there should be no more than one crease on the front windshield and no more than one on the rear windshield. Sit in the driver's seat and check the film's transparency. The view through the front windshield should not appear blurry or have color distortion. 3. Check for water bubbles in the film. Any residual water should be promptly removed. To inspect for bubbles, observe from both sides of the glass for better clarity. 4. There should be no noticeable scratches on the filmed glass, as they can affect the car's appearance. Additionally, no new scratches should be present on the side window seals. 5. If the glass cracks during or within 24 hours after the film installation, report the issue immediately to the car detailing shop or 4S store for timely resolution.
13
3
Share

What problems might occur after a flooded car is repaired?

Interior moisture can easily lead to mold and odors; wiring harnesses and computers are prone to corrosion, which may cause malfunctions later. Here is relevant information: Severity: The severity of a flooded car depends on the height of water submersion and whether the vehicle was started in water. Below the seats: If the water only reached below the seats, this height does not affect the vehicle's air intake, fuse box, or dashboard. After thorough cleaning, the impact on the vehicle is relatively minor. Cleaning: During cleaning, it is necessary to replace the transmission fluid, engine oil, and brake fluid, as well as clean and maintain the vehicle's brake system, exhaust pipe, and catalytic converter to further reduce the impact of flooding on the vehicle's subsequent use.
4
4
Share

What are the effects of a car being exposed to rain all night?

The effects of a car being exposed to rain all night are as follows: The car paint may be corroded: In some heavily polluted areas, the rain is mostly acid rain, so exposure to rain is equivalent to exposing the car paint directly to acid rain, which can corrode the paint, leading to rain marks, oxidation, and even cracking. Moisture and mold: Compared to sunny days, the interior of the car is more prone to moisture and mold after rain. At the same time, rainwater can seep into the seams of the car body, causing iron parts to rust and corrode easily. Therefore, after the rain stops, accumulated moisture should be removed as soon as possible to prevent mold growth. Bacterial growth: The more humid the environment, the faster bacteria multiply, especially during the rainy season. Places that are usually dry can be ventilated to maintain air circulation, but during the rainy season, avoid opening windows for ventilation, as this can lead to a rapid multiplication of bacteria inside the car. Rainwater entering the headlights: Water entering the headlights can affect their brightness, and excessive water may damage the headlights. It can also alter the direction of light refraction, posing a safety hazard while driving.
1
1
Share

Does driving through water affect the car?

Driving through water does affect the car. Headlights: Water can easily enter the headlights when driving through water, forming condensation inside the lights and affecting the light's transmission. Vehicle chassis: The chassis can be washed by dirty water, causing debris to accumulate in the gaps under the chassis or body. If not cleaned promptly, this debris can lead to rust on the chassis. Additionally, dead branches, leaves, and discarded plastic bags may wrap around the bearings and suspension, creating safety hazards. Brake pads: After driving through water, it's essential to remove moisture from the brake pads, especially for cars with drum brakes. Otherwise, the vehicle may lose braking ability after driving through water, leading to serious dangers or accidents.
4
4
Share

Will the insurance company cover a water-damaged car?

Insurance companies will compensate for water-damaged cars. Here is some extended information: Auto Damage Insurance: Auto Damage Insurance refers to a type of commercial auto insurance where the insurer compensates within reasonable limits for damages to the insured vehicle caused by an insured accident while the vehicle is being used by the insured or an authorized driver. Scope of Coverage: The insurer is responsible for compensating for losses to the insured vehicle caused by the following reasons while the vehicle is being used by the insured or an authorized driver: collision, overturning, falling; fire, explosion, spontaneous combustion (requires separate Spontaneous Combustion Insurance); falling or collapsing external objects; storm, tornado; lightning, hailstorm, heavy rain, flood, tsunami; ground collapse, ice collapse, cliff collapse, avalanche, mudslide, landslide, earthquake; natural disasters affecting the ferry carrying the insured vehicle (limited to cases where the driver is accompanying the vehicle).
9
3
Share

What Causes the Scraping Sound When the Car is Running?

There are many possible reasons for noise during car driving: it may be due to engine oil issues. Inferior quality engine oil, prolonged lack of oil changes, or insufficient oil levels can all easily increase friction between the valves and guides, as well as in hydraulic lifters, thereby amplifying various sounds within the engine. Relevant information about engine oil is as follows: Introduction: Engine oil, also known as engine lubricant, English name: Engine-oil. With a density of approximately 0.91×10³ (kg/m³), it serves to lubricate and reduce wear in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It is hailed as the 'blood' of the car. Composition: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil, imparting certain new properties, making them an important part of lubricating oil.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.