How to Determine When to Replace Brake Pads

How to Remove the Rear Seat of a New Santana?

Here is the method to remove the rear seat of a New Santana: 1. Prepare the seat removal tools: The tools required to remove the rear seat of a Santana are not complicated—only a large flat-head screwdriver is needed, but the operation requires a bit more technical skill. 2. Remove the right-side fixing clip of the rear seat: The reason the Santana's rear seat is very difficult to remove is due to this clip. The small metal hook on the rear seat is latched into the clip below. These clips are made very tight on every Santana's rear seat, making it quite challenging to pry them open. Poor handling can easily damage the plastic clip. 3. Remove the left-side fixing clip of the rear seat: Use the large flat-head screwdriver to pry open the left-side fixing clip. The force applied must gradually increase from small to large until the clip can be pried open. Too little force won't open it, while too much force can break the clip below, so this step requires technical skill and caution. 4. Separate the rear seatbelt clip: The rear seat usually has a seatbelt clip attached to it, ensuring the rear seatbelt can be securely fastened. To remove the rear seat, this clip needs to be separated from the seat. Simply pull it out by hand from the seatbelt slot. 5. Complete the rear seat removal: Once the seatbelt clip is separated, the Santana's rear seat can be removed. At the corners of the rear seat, you will see small metal hooks on both sides, latched into the lower part of the seat. These hooks are fixed to the car's chassis. Gently pull the seat outward to separate it.

4

0

Share

Is it okay to consistently use 95 gasoline for a car labeled for 92?

It is possible but unnecessary. Here are the differences between 92 and 95 gasoline: 1. The anti-knock performance of 92 gasoline is slightly weaker than that of 95 gasoline. Since engines have different compression ratios, their requirements for gasoline's anti-knock properties also vary. Engines with lower compression ratios only need to use 92 gasoline, while those with higher compression ratios require 95 gasoline with better anti-knock performance. If 92 gasoline is used in such engines, knocking may occur. Frequent knocking can easily damage the engine, so it is important to choose the appropriate gasoline grade for your vehicle. 2. Although some people claim that 95 gasoline burns slower and long-term use in vehicles with low-compression engines may lead to carbon deposits or reduced power, this is unlikely to happen, and car owners can use it with confidence. However, using higher-grade gasoline does not provide significant additional benefits for the vehicle and is more expensive, making it unnecessary.

15

3

Share

What does 15w40 engine oil mean?

The number 15 represents the minimum applicable temperature of the engine oil, which is -20 degrees Celsius. The W stands for Winter, and 40 indicates the high-temperature viscosity of the oil. This is the meaning of 15w40 engine oil. The oil grade typically represents viscosity and quality. The oil grade consists of two parts: classification and viscosity specification, with the specific interpretation as follows: The number before the W represents cold-start performance. The smaller the number, the easier it is to start the engine in cold weather. Common grades include 0w, 5w, 10w, and 15w. The number 40 indicates the viscosity characteristics of the oil at high temperatures. High-viscosity oils (with higher values) may be more suitable for high-speed driving or heavy-duty vehicles. The number after the W is an indicator of the oil's resistance to high temperatures. The larger the number, the better the oil's protective performance at high temperatures. The grade after the oil classification indicates its viscosity specification. For example, in "15w-40" or "5w-40," the lower the number before the W, the better the engine protection during cold starts. For instance, 5w can withstand external temperatures as low as -30 degrees Celsius, while 20w can withstand -15 degrees Celsius. The number after the W represents the oil's kinematic viscosity at 100 degrees Celsius. The higher the number, the higher the viscosity. The viscosity of lubricating oils is often labeled using SAE grades. SAE is the abbreviation for the "Society of Automotive Engineers" in English. Internationally, the SAE (Society of Automotive Engineers) viscosity grades and API (American Petroleum Institute) quality grades are widely adopted. When selecting engine oil, consider the following precautions: Choose engine oil based on the engine's requirements. There is no need to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. It is advisable to choose multi-grade oil whenever possible. Multi-grade oil is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker prematurely, and the oil pressure may be lower than that of conventional oil during use. These are normal phenomena. Never mix different grades of engine oil, as this can damage internal engine components and shorten the maintenance interval.

2

Share

How to Solve Frost on Car Windows in Winter?

If there is frost on the car windows, there are two methods to solve it: 1. If you have a hard card in the car, you can use the card to scrape off the frost on the window from top to bottom. A snow shovel would be even more convenient. Advantages of this method: It is relatively quick and saves time. Disadvantages: It may easily scratch the glass. 2. Start the vehicle and wait for the engine's water temperature to rise to the normal working temperature, then press the defrost button on the air conditioning system to heat the front windshield at maximum fan speed. Once the temperature on the glass rises, the frost will automatically melt. After melting, use the windshield wipers to assist in cleaning, and the frost on the glass will be completely removed. The advantage of this method is that it does not damage the glass, but the disadvantage is that the engine warm-up time is too long.

9

3

Share

What are the causes of automatic glass shattering?

Spontaneous breakage of tempered glass without direct mechanical force is known as tempered glass self-explosion, which is one of the inherent characteristics of tempered glass. There are many reasons for tempered glass to self-explode, which can be simply summarized as follows: 1. Stones, impurities, or bubbles in the glass. 2. Defects such as scratches, cracks, or deep chipped edges caused by improper operation during the glass processing, which can easily lead to stress concentration and result in tempered glass self-explosion. 3. Uneven or offset stress distribution in tempered glass: Uneven or asymmetric temperature gradients along the thickness of the glass during heating or cooling can cause tempered products to have a tendency to self-explode.

15

5

Share

What are the signs of a car motor failure?

Signs of car motor damage: 1. Failure to start or sluggish response: For example, when starting the vehicle, it may "cause" the inability to "start." The accessory electromagnetic clutch may also lead to "abnormal operation" of the starter's overall components, preventing the vehicle from starting. 2. Difficulty starting: Although it may still "start," the starting time is "too long," which can easily cause overheating in the vehicle's wiring, the starter's internal components, and other concurrent "symptoms." In severe cases, it may burn out other electrical facilities and wiring. 3. If the internal wiring is damaged and the owner "starts" the vehicle under "special" conditions: It may lead to serious consequences such as open circuits, short circuits, or even burning out of other electrical components due to the internal wiring. Therefore, all parts of the car are closely "related" to the vehicle's ignition, engine operation conditions, and safe driving. Whether it's the starter or other components, any faults should be promptly addressed to ensure normal operation and safe driving.

14

3

Share

How to Determine When to Replace Brake Pads

How to Remove the Rear Seat of a New Santana?

Is it okay to consistently use 95 gasoline for a car labeled for 92?

What does 15w40 engine oil mean?

How to Solve Frost on Car Windows in Winter?

What are the causes of automatic glass shattering?

What are the signs of a car motor failure?

How many generations of Volkswagen CC have been released?

What procedures are required for changing car color with film?

What's the Difference Between Turbocharged and Naturally Aspirated Engines?

Can You Press the Clutch and Brake Simultaneously?