How to Determine When to Replace a Motorcycle Chain?

1 Answers
VanVivian
07/25/25 1:15pm
The tightness of the chain can be adjusted, but if it cannot be adjusted, it needs to be replaced. Alternatively, if the chain has become too long and is not adjusted in time, causing the chain and sprocket to not fit tightly and resulting in slight deformation of the chain due to wear, it should also be replaced for safety reasons. Below is more information about motorcycle chains: Classification: According to structural types, they can be divided into: motorcycle sleeve chains, motorcycle roller chains, motorcycle sealed ring chains (oil chains, further divided into O-ring sealed chains and X-ring sealed chains), and silent chains. Precautions: Regularly clean the chain and sprocket, and apply lubricating grease in a timely manner. Especially in rainy, snowy weather or muddy roads, more attention should be paid to the maintenance of the chain and sprocket to extend the chain's service life.
Was this review help?
8
2
Share
More Forum Discussions

How to Open the X-Trail's Engine Hood?

There are two ways to open the X-Trail's engine hood: 1. Handle-type switch: The handle-type switch is usually located at the lower left corner of the driver's seat. Lift the handle along the arrow to open it, then lift the engine hood, remove the engine compartment cover support rod from its fixed bracket, and finally hang the engine compartment cover support rod into the groove of the engine compartment cover. 2. Button-type switch: The button-type switch is usually located on the panel on the left side of the center console. Pull the engine compartment cover handle, and the engine compartment cover will pop up slightly. Insert your hand into the center of the front end of the engine compartment cover, feel the auxiliary hook handle of the engine compartment cover, lift the flap up and hold it, while lifting the engine compartment cover upward, remove the engine compartment cover support rod, and place one end of the engine support rod into the support slot to support the engine compartment cover.
9
0
Share

What Kind of Insurance is a Replacement Vehicle Insurance?

Replacement vehicle insurance is an additional coverage to the vehicle damage insurance. Only vehicles already insured under vehicle damage insurance can purchase this additional coverage. During the insurance period: If the insured vehicle, while in use, suffers body damage due to an insurance incident listed under Article 1 of the vehicle damage insurance, requiring it to be sent for repair, the insurer will cover the costs incurred by the policyholder for renting a replacement vehicle, within the limits specified in the insurance contract. Partial loss: During the mutually agreed repair period, the compensation is calculated by multiplying the daily compensation amount agreed upon in the insurance policy by the actual number of days from when the vehicle is sent for repair and the handover procedures are completed until the repair is finished and the pickup procedures are completed.
20
3
Share

Can the car engine be modified?

Engine modifications are possible. Modification principles: Relevant officials from the vehicle management office have made it clear that as long as the modifications do not affect driving safety, they are not prohibited and can pass the annual inspection. Market response: The two important principles of modification are safety and practicality. 'Modifications' are usually basic, such as adding a bumper, spoiler, car stickers, or replacing the audio system, high-voltage wires, spark plugs, etc. Precautions: According to modification experts from car manufacturers, replacing the headlights with xenon lights is safe for driving itself, but drivers must adhere to the regulation of switching from high beam to low beam when approaching oncoming vehicles within about 100 meters at night, so as not to affect the visibility of other vehicles. As for installing a sunroof, since it alters the structure and load-bearing capacity of the car's roof, reducing safety performance, it is best not to modify it.
2
5
Share

How many days does it take to get the result of Xuzhou Subject 3 appointment?

Generally, the review time for Subject 3 appointment takes 5-10 days. If you are in a first-tier city where there are more applicants, the time may be extended. The latest notification will be given 3-5 days before the exam. If time is tight, remember to book the exam in advance. Introduction to Subject 3 Exam: Preparation before getting on the car, simulated light test, starting, driving in a straight line, gear shifting operation, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Points to note for Subject 3: During the Subject 3 exam, it is necessary to check the car's appearance and safety conditions in advance, ensure the car lights are functioning properly, strictly follow the exam requirements during the test, avoid crossing lines, and avoid speeding.
20
5
Share

How Many Categories Are There for Specialized Motorized Industrial Vehicles Within Premises?

Specialized motorized industrial vehicles within premises are divided into two categories: specialized motorized industrial vehicles within premises and specialized tourist sightseeing vehicles within premises. Specialized motorized industrial vehicles within premises: Forklifts, including internal combustion counterbalanced forklifts, battery counterbalanced forklifts, internal combustion side loaders, straddle forklifts, reach trucks, three-way stackers, pallet stackers, and explosion-proof forklifts. Tractors, including internal combustion tractors, battery tractors, and fully hydraulic tractors. Push-pull tractors, including internal combustion push-pull tractors and battery push-pull tractors. Transport vehicles, including internal combustion fixed platform trucks, battery fixed platform trucks, platform stackers, pallet trucks, and order pickers. Specialized tourist sightseeing vehicles within premises: Internal combustion sightseeing vehicles; battery sightseeing vehicles.
2
1
Share

How often should the Benelli TNT 250 change its engine oil?

Benelli TNT 250 should change its engine oil every 1,000 to 2,000 kilometers. Introduction to Benelli TNT 250: The Benelli TNT 250 is a veteran member of the Qianjiang Group. This motorcycle is equipped with a water-cooled single-cylinder engine, with a maximum actual power of 18KW and a maximum displacement of 250cc. Among its peers, the power performance of the Benelli TNT 250 is widely recognized. Fuel consumption of Benelli TNT 250: The Benelli TNT 250 has a fuel consumption of 2.6L per 100 kilometers, with lower consumption during long-distance steady-speed rides. On average, the fuel consumption is around 3L/100km. In urban areas, the consumption is higher at 3.3L, mainly due to traffic congestion, but the actual driving speed results in a consumption of approximately 2.73L.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.