How to Determine When to Change Car Engine Oil

How to Remove the Spark Plugs on a Toyota Vios?

Toyota Vios spark plug removal steps: 1. Perform the operation when the engine is cool, and prepare the necessary tools including a wrench, socket, and adapter; 2. Disconnect the electrical connector and remove the ignition coil. In all gasoline-powered vehicles, the spark plugs are located beneath the ignition coils, with an accompanying power supply plug nearby; 3. Unscrew the spark plugs. Next, use an appropriate socket to loosen the spark plugs, ensuring gentle movements to prevent dust from entering the combustion chamber. The Toyota Vios is a compact car with a 4-door, 5-seat sedan body structure. Its dimensions are 4435mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. The suspension system features MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

19

4

Share

What level is SL engine oil?

SL engine oil is one of the API quality grades, specifically designed for gasoline vehicles. Among the commonly used quality grades of engine oil, it is considered a lower-level grade. Currently, SL engine oil is mostly mineral oil. In the classification of engine oils, one parameter is the API quality grade. Gasoline engine oils are graded from SA to SP, and this designation is essentially used to describe the quality of the oil. The engine oil quality grade, also known as the performance grade, is an important basis for correctly selecting lubricants. The selection of diesel engine oil quality grades is based on two factors: the sum of the mechanical and thermal loads of the automobile engine, expressed by the strengthening coefficient, and the severity of the engine operating conditions.

13

0

Share

What are the symptoms of a faulty coolant temperature sensor?

Symptoms of a faulty coolant temperature sensor: 1. The temperature gauge needle does not move and points to the highest position; 2. Difficulty starting the engine when cold, because the faulty coolant temperature sensor still shows a hot engine temperature signal during cold starts, and the ECU cannot receive the signal for a richer air-fuel mixture, only providing a leaner mixture for the engine; 3. Increased fuel consumption and unstable idle; 4. Difficulty accelerating, even when the throttle is fully depressed, the engine RPM does not increase. The function of the coolant temperature sensor is to convert the coolant temperature into an electrical signal, which is input to the ECU. When the temperature is low, it increases the fuel injection amount to adjust the fuel injection quantity, corrects the ignition timing, and at low temperatures, the ECU controls the idle control valve based on the coolant temperature sensor signal to increase the idle speed, affecting the EGR valve.

13

3

Share

How to Turn on the Heater in an Electric Car?

Steps to turn on the heater in an electric car: 1. After starting the vehicle, wait 5 to 10 minutes until the water temperature reaches the normal operating temperature, then you can turn on the heater; 2. Adjust the car's air conditioning circulation mode to internal circulation; 3. Switch the air conditioning to the heater mode, indicated by the red zone; 4. Do not turn on the AC (air conditioning) as the car heater utilizes the vehicle's own heat cycle to save energy; 5. Adjust the direction of the warm air flow as desired. Turning on the heater also consumes the car's battery power. Owners can switch the air conditioning to internal circulation mode when turning on the heater to warm up the interior more quickly. Owners should also always monitor the remaining range of the vehicle and remember to charge it promptly.

17

1

Share

What materials are needed for Volkswagen's first maintenance?

Items required for the first maintenance include: driver's license; motor vehicle registration certificate; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after the new car has been driven, with the specific timing varying by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven according to the standard load and normal speed requirements. The timing for the first maintenance is calculated based on the vehicle pickup date, with two indicator values: mileage and time. Whichever comes first serves as the standard. First maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges, etc. Required time: Approximately 2 hours to complete all tasks. The most crucial aspect of the first maintenance for a new car is the replacement of engine oil and the oil filter. When changing the oil, the oil filter must also be replaced simultaneously. The selection of engine oil must refer to the "Vehicle Use and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people tend to organize and clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, they can be vacuumed or taken out, brushed with detergent, dried, and then put back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. Water entering these areas does not dry by wind but flows through the holes to parts like the gearbox, causing erosion and corrosion. A better approach is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the antifreeze and add the same brand from the start. Since antifreeze brands differ, their chemical properties vary significantly. Various functional additives may corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. To prevent bolts and nuts on wheels from rusting, some apply lubricating oil, which can pose safety risks. When the car is driven at high speeds, bolts and nuts may loosen or even fall off, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI (Electronic Fuel Injection) car differs from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring a smooth start.

13

5

Share

How to Turn on the Warm Air in the Lamando?

Steps to turn on the warm air in the Lamando: 1. Locate the one-touch start button in the vehicle cockpit and press it to start the engine; 2. After the engine starts, press the OFF button on the vehicle's air conditioning system to activate the air conditioning; 3. Once the air conditioning is on, press the AC button on the left air conditioning knob to turn off the cold air; 4. After turning off the cooling function, rotate the two knobs on the left and right of the air conditioning control system to the right to activate the warm air for both the driver and passenger compartments. The Lamando is a compact car under the Volkswagen brand, featuring a 4-door, 5-seat sedan body structure. It measures 4615 mm in length, 1826 mm in width, and 1425 mm in height, with a wheelbase of 2656 mm. The suspension system employs a MacPherson independent front suspension and a multi-link independent rear suspension.

18

4

Share

How to Determine When to Change Car Engine Oil

How to Remove the Spark Plugs on a Toyota Vios?

What level is SL engine oil?

What are the symptoms of a faulty coolant temperature sensor?

How to Turn on the Heater in an Electric Car?

What materials are needed for Volkswagen's first maintenance?

How to Turn on the Warm Air in the Lamando?

What is the difference between metallic paint and regular paint for vehicles?

Does the car have any impact without glass water?

What car has a black square logo?

What are the differences between Audi A3 and S3?