How to Determine if Brake Pads Need Replacement

1 Answers
LeDelilah
07/29/25 4:05pm
Different vehicle models and driving habits can vary significantly, so whether brake pads should be replaced should be based on actual inspection results. The methods to determine if brake pads need replacement are as follows: 1. Visual Inspection. Each brake pad has a raised indicator on both sides, with a thickness of about 2-3 millimeters, which is the minimum replacement limit for the brake disc. If the brake pad thickness has reached this indicator, it must be replaced. 2. Listen for Sounds. If there is unusual noise when lightly applying the brakes, the brake pads must be replaced immediately. This is because the limit indicators on both sides of the brake pads are already directly rubbing against the brake disc, indicating the pads have exceeded their limit. 3. Feel the Braking Force. When brake pads wear thin, braking performance is affected. You will need to press the brake pedal deeper to achieve the same braking effect that was previously achieved with a light press, and the initial braking response will noticeably weaken. If the brakes feel soft or fail to stop the vehicle effectively, the brake pads need replacement.
Was this review help?
3
0
Share
More Forum Discussions

What Type of Battery Does a Car Key Use?

Car key batteries are typically CR2032, but other models include CR2025, CR2016, and CR1632. Here, "CR" stands for lithium battery, "20" indicates the battery diameter (20mm), and "32" refers to the battery thickness (3.2mm). Below is an introduction to car key battery models: 1. Button-type CR2016 Battery: This model is widely used in modern car key remotes and is one of the most common types. It has a voltage of 3V. Since car keys usually require 9V, all three batteries are typically replaced at once. Specifications: diameter of 20mm and thickness of 1.6mm. 2. Button-type CR2025 Battery: This model is less common than the CR2016. It is thicker but has a higher storage capacity. Specifications: diameter of 20mm and thickness of 2.5mm. This type is also often found in audio remote controls. 3. Alkaline 12V Battery: These were commonly used in early car key remotes and electric rolling shutters. They are compact, have high output voltage, and offer a longer remote control range.
15
2
Share

How to Determine if the Car Body is Aligned Properly?

Here are specific methods to determine if the car body is aligned properly: 1. Find the appropriate reference point: During the practice of Subject Two (parking exercises), each student has different heights and body types, leading to varying suitable reference points. Students can observe the instructor's method of finding reference points and communicate with the instructor to find the most suitable one for themselves. After all, during the preparation for parking maneuvers like reversing into a garage, if the reference point is not correctly identified, the car body is prone to misalignment. 2. Learn to use the rearview mirrors: In Subject Two, students often experience "visual discrepancies" when using the rearview mirrors. For example, when adjusting the car body to align after entering the garage, the rearview mirrors may show the car body parallel to the garage lines when it is actually not. During regular practice, students need to constantly observe the images in the rearview mirrors. When the car body appears "wider near and narrower far" in the mirrors, it is roughly aligned. 3. Find reference objects: During the straight-line driving in Subject Three, most cases of vehicle deviation occur due to the lack of suitable reference objects. Students can use the rear of the vehicle ahead, lane lines, fences, or roadside trees as reference objects. During straight-line driving, if the distance between any part of the car body and the reference object changes, the vehicle has already deviated, and the steering wheel should be adjusted slightly to realign the car body. 4. Learn to adjust seating posture and hold the steering wheel correctly: In both Subject Two and Subject Three, students need to maintain a proper seating posture without leaning, as incorrect posture can lead to misjudgment of the car body's alignment. The steering wheel should be held with both hands at the "9 and 3 o'clock" positions. When turning the steering wheel, both hands should not let go and can rotate up to 180 degrees in either direction. While adjusting the direction, continue to observe left and right and make slight adjustments to realign.
17
2
Share

What are the regulations for the use of temporary license plates for motor vehicles?

Before the official license plate is issued, new vehicles usually have a temporary license plate. The regulations for temporary license plates are mainly divided into three parts. The following is a detailed introduction: 1. Types of temporary license plates: (1) Sky blue background with black characters and black frame lines, limited to driving within the city, which is the local temporary license plate; (2) Brown-yellow background with black characters and black frame lines, which can be used for cross-city driving, also known as the non-local temporary license plate; (3) In addition to the temporary license plates for ordinary household vehicles, there are also temporary license plates for test motor vehicles and special-type motor vehicles. Their appearance is similar to ordinary temporary license plates, but they usually have a "test" or "special" text identifier. 2. Situations requiring temporary license plates: (1) When driving from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase; (2) When transferring vehicle registration and the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the original place; (3) When a new vehicle in the local area that has not yet obtained an official license plate needs to be driven to another place for modification, a temporary license plate must be applied for locally. After modification, a temporary license plate must be applied for at the local place to drive back to the original area; (4) When a vehicle purchased locally needs to be driven to another place, a temporary license plate must be applied for locally to drive to the other place; the same applies in reverse. (5) When the vehicle registration is not yet fixed and temporary trial use is needed. 3. Validity period of temporary license plates: The validity period will be indicated on the temporary license plate, which is 15, 30, or 90 days. The temporary license plate must be used within the validity period. If the official license plate has not been obtained after the validity period expires, a new application must be made, but the number of applications cannot exceed three times.
15
1
Share

How long after painting a car can it be exposed to rain?

After the car's paint has been baked, it can be exposed to rain once the paint is completely dry. Below is an introduction to car paint: Introduction: Car paint refers to the paint sprayed onto a car, also known as automotive paint. It is a type of coating. Function: Applying paint to a car not only forms a protective film on the surface, making the body less susceptible to corrosion and extending the vehicle's lifespan, but also provides an aesthetic appeal. Different types of car paint produce different effects, and choosing different paint types and colors can showcase the car's unique personality. Therefore, car paint is crucial to the vehicle itself.
3
5
Share

What is the fuel consumption of the Besturn B70 2.0?

Taking the 2018 Besturn B70 2.0L Manual Internet Smart Enjoyment model as an example, its fuel consumption is 7.5 liters. The vehicle has a length, width, and height of 4800 mm, 1820 mm, and 1472 mm respectively, with a wheelbase of 2725 mm, a fuel tank capacity of 58 liters, a curb weight of 1460 kg, and a body structure of a 4-door, 5-seater sedan. In terms of power, it is equipped with a 2.0-liter naturally aspirated engine with a maximum power of 108 kW and a maximum torque of 184 Nm. For the suspension, this model uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear.
10
2
Share

Is Air Conditioner Water Dripping on the Car Harmful to the Paint?

No harm. Below is the relevant introduction about car paint: Introduction: Car paint generally refers to the paint coating on the car surface. The purpose of applying a coating film on the car paint surface is to protect the gloss of the car paint from diminishing and to provide a physical protective layer on the paint surface, thereby safeguarding the paint. Principle: The main component of car paint is resin, which has relatively large molecular gaps. After coating, small molecular elements such as silicon, silicon dioxide, and nano-inorganic silicon in the coating solution can fully penetrate into the molecular gaps and micropores of the car paint, forming a transparent crystalline film layer on the surface, similar to a smartphone screen protector. This significantly enhances the hardness and scratch resistance of the car paint surface, providing long-term sealing protection and keeping the car paint bright and new for a long time.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.