How to Defog the Car Interior?

1 Answers
DelKira
07/29/25 11:37am
Methods to defog the car interior: 1. Simply roll down the windows; 2. Turn on the air conditioning's external circulation mode. Fogging occurs inside the car because passengers exhale water vapor while breathing. To remove the fog, you just need to quickly expel this water vapor. The windshield is particularly prone to fogging. The front windshield relies on the car's air conditioning system to defog, while the rear windshield uses heating wires. There is a row of air vents located below the front windshield. When you activate the front windshield defogging function, these vents will blow air to help clear the fog. Similarly, activating the rear windshield defogger will cause the heating wires on the rear windshield to start working. However, these heating wires will automatically turn off after a period of operation—this is not a malfunction but rather a design feature to protect the heating wires.
Was this review help?
17
3
Share
More Forum Discussions

How to Disassemble and Replace the Battery in an Old Mazda 6 Key?

First, press the silver button on one corner of the key to release the mechanical key; then use a small steel ruler to gently pry open the upper half of the key, separating the shell. Remove the old battery and install a new one. The battery model used is CR1620. When the car remote key runs out of power, you can use the mechanical key on the remote key as a backup to operate the vehicle.
15
0
Share

How to Reset the Maintenance Light on an Older Volkswagen Touran?

First, turn off the ignition switch to shut down the vehicle. Then, use your left index finger to press and hold the "0.0" button located below the dashboard. After releasing, you need to press the "0.0" button below the dashboard again within 30 seconds. Prepare the VAS6150 to connect to the OBD port, select the diagnostic module, choose the maintenance reset option, and click confirm. The maintenance light reset is now complete.
1
1
Share

How to Open the Sunroof on an Older Model Odyssey?

To open: Pull the switch firmly backward. To close: Push the button firmly forward. To open: Gently pull the switch backward until the sunroof reaches the desired position. To close: Gently push the switch forward until the sunroof reaches the desired position. To lift: Press the middle part of the panoramic sunroof glass switch. To close: Push the switch firmly forward.
7
2
Share

What is the correct way to use Geely's one-button start?

Press the start button once, at this time the ACC light will turn on; press it once more, and the vehicle will perform a self-check. Depress the brake to ignite and start the engine. You can choose to warm up the car in place, with the duration depending on the environment; then depress the brake pedal again, shift to D gear, and release the handbrake. Slowly release the brake pedal, gently press the accelerator, and the start-up is complete. It is not necessary to follow these steps every time to start the vehicle.
20
2
Share

How to Deal with Foggy Windows on a Levin?

Using hot air to blow directly is more effective than using cold air, although this method takes relatively longer to work. Opening the windows slightly can help circulate air, allowing the cold air from outside to enter the car, reducing the temperature difference between the inside and outside of the car, thereby eliminating the fog. Using professional anti-fog spray, evenly spray it on the cleaned glass surface, and wait for it to form a protective film on the inner side of the glass.
6
3
Share

What is the method for removing and installing the air conditioning panel on an old Peugeot 308?

First, remove the air conditioning control module, then use a plastic pry tool to loosen the upper cover panel on the center console. Remove the upper cover panel of the center console, then use the plastic pry tool to loosen the air vents on the center console. Once the air vents are removed, the disassembly is complete.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.