How to Deal with Yellowing White Cars?

2 Answers
LeElena
07/28/25 9:55pm
You can opt for polishing and waxing. Make sure to go to a high-quality car detailing shop for the polishing. If the primer is yellowing, it's recommended to repaint the hood. When repainting the hood, avoid just painting the small yellowed area to prevent color differences.
Was this review help?
7
2
Share
VanEmerson
08/12/25 2:30am
Sigh, I've encountered the issue of white cars turning yellow several times, and it's really annoying. The main reason is that the car paint is exposed to the sun for a long time, and UV rays cause the paint to oxidize and change color. Plus, the accumulation of dust, bird droppings, or air pollutants can make the yellowing more noticeable. To deal with it, the first step is to wash the car thoroughly using a neutral car wash solution to clean off surface dirt. Then, polish it—either by hand or machine—to remove the yellowed oxidized layer. After polishing, apply wax or a protective coating to prevent further UV damage. For prevention, I try to park under a carport or in the shade to avoid direct sunlight and perform basic maintenance every three months. If the situation is severe, I go to a professional auto detailing shop—they offer deep restoration services to bring back the bright white finish. Remember not to delay; addressing it early saves effort, yields better results, and extends the paint's lifespan.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

Is the BMW Z4 an automatic or manual transmission?

BMW Z4 is equipped with an automatic transmission. Differences between automatic and manual transmissions: Different driving methods: automatic transmissions shift gears based on the car's own RPM, while manual transmissions require manual gear shifting; Different clutch pedals: automatic transmission cars do not have a clutch pedal, making them simpler to operate and more beginner-friendly, whereas manual transmission cars require mastering the use of the clutch pedal; Different car prices: for the same model and configuration, automatic transmission cars are more expensive. Automatic transmissions are simpler to operate: Automatic transmission vehicles do not have a clutch pedal, so they do not require coordination with the left foot. Basically, mastering the brake, accelerator, and gear shifting is enough to try driving, making them more suitable for beginners. However, it is important to note that due to the lower technical requirements and driving difficulty of automatic transmissions, only a C2 driver's license can be obtained during the test, and a C2 license does not permit driving manual transmission vehicles.
1
1
Share

What causes the Changhe Furuida to shake and stall when cold?

Changhe Furuida shaking and stalling when cold can be caused by a dirty throttle body or severe carbon buildup on the intake valves. Dirty throttle body: When starting a cold engine, insufficient air intake leads to incomplete combustion, but the issue usually resolves itself after a few seconds as the ECU automatically adjusts. Severe carbon buildup on intake valves: Fuel sprayed onto the intake valves during cold starts is mostly absorbed by the carbon deposits, resulting in excessively lean fuel mixture in the cylinders and causing shaking. These two issues are very common. The solution is cleaning. For the first issue, have the throttle body and intake tract cleaned at a 4S shop. For the second issue, use high-quality fuel additives to clean the carbon deposits on the intake valves. These measures should basically solve the problem.
3
2
Share

What is the RPM of the Passat at 120 km/h on the highway?

When the Passat reaches a speed of 120 km/h on the highway, the RPM is generally around 3400. At a speed of 110 km/h, the RPM is typically around 3200. Indicators of a good engine: During high-speed driving, lower engine RPM does result in reduced fuel consumption, but this is not the sole indicator of engine quality. A car's fuel economy cannot be judged solely based on this factor. For instance, a good engine must be paired with a smooth transmission to ensure that the engine can deliver maximum power and torque at lower RPM, increasing engine load and truly making the vehicle fuel-efficient and easy to drive. Idle RPM: Many modern engines are high-RPM engines, and idle RPM varies depending on the vehicle model and engine type. Generally, an idle RPM between 500 and 850 is considered normal.
7
1
Share

Where is the Volvo XC60 nameplate located?

The factory nameplate of the Volvo XC60 is located below the right B-pillar of the vehicle. Here is some additional information: 1. Vehicle nameplate: The vehicle nameplate is a label that indicates the basic characteristics of the vehicle, mainly including the manufacturer, model, engine power, total weight, load capacity or passenger capacity, factory serial number, manufacturing date, and manufacturer name. 2. Significance: Check the factory nameplate to confirm information such as the vehicle's displacement and production date, and also look for signs of tampering or scratches on the nameplate. Since many vehicle nameplates are installed in places that are not easily bumped, any signs of tampering should prompt a thorough inspection of the vehicle. Additionally, check the registration date on the vehicle's registration certificate, which is usually after the manufacturing date. If there is a significant gap between these two dates, it may indicate that the vehicle is an overstocked car.
7
3
Share

How to adjust the rearview mirror of T-Roc?

T-Roc rearview mirror adjustment method: 1. L Adjust the left exterior rearview mirror by turning the knob up, down, right or left; 2. R Adjust the right exterior rearview mirror by turning the knob up, down, right or left; 3. 0 The zero position indicates that the exterior rearview mirror has been folded out and cannot be adjusted. In case of malfunction, the electric exterior rearview mirror can be manually adjusted mechanically by pressing the edge of the mirror. The T-Roc body adopts a "Style Aesthetics" design, breaking away from Volkswagen's family-style design and fully utilizing the design elements of the overseas version. The front face of the new car presents a T-shaped appearance, with the headlight cluster integrated into the front grille, complemented by circular LED daytime running lights on both sides, giving it a very fashionable overall look.
3
2
Share

What Causes Low-Speed Shaking in Mercedes-Benz?

Reasons for low-speed shaking in Mercedes-Benz: Poor fuel combustion resulting in insufficient power output; possibly due to spark plug failure causing inadequate ignition energy; air intake system leaks or low fuel pressure; injector poor atomization, leakage, or blockage; improper idle adjustment and other faults. Low-speed shaking is the most common fault: It is caused by damaged spark plugs where the electrode gap wear leads to insufficient spark plug ignition energy, causing unburned air-fuel mixture and shaking during acceleration. Another reason is cracks in the ceramic part of the spark plug, leading to no ignition in one cylinder, which also causes acceleration shaking. Preventing idle shaking: First, determine whether the shaking is caused by carbon deposits. If it is, clean the carbon deposits. If the shaking persists after cleaning, check the spark plugs. Therefore, regular car maintenance is essential. Idle shaking issues can also be identified and resolved during the maintenance process.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.