How to Deal with Yellowing Inside Car Headlights?

Can I drive on the highway with a tire pressure of 2.7?

If the tire pressure reaches 2.7 bar while driving, it is acceptable to drive on the highway. However, if the tire pressure is already at 2.7 bar when the car is cold, it is recommended to reduce the tire pressure before driving on the highway. If the tire pressure is 2.7 bar when the car is cold, it will increase further after driving for a while, and excessively high tire pressure can easily lead to a tire blowout. The following are the hazards of excessively high tire pressure: 1. Affects braking performance: The friction and adhesion of the tires will decrease, affecting braking performance. 2. Reduced comfort: Causes steering wheel vibration and deviation, reducing driving comfort. 3. Shortened tire lifespan: Accelerates localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan. 4. Affects component lifespan: Increased vibration can indirectly affect the lifespan of other components.

10

2

Share

What is the displacement of 280tsi?

280tsi is equivalent to a displacement of 1.4 liters. In tsi, 't' stands for twin-charging, 's' for stratified, and 'i' for injection. TSI is more advanced than FSI, representing an engine with high power, low speed, and high torque. More about tsi: 1. TSI technology combines twin-charging and stratified direct injection, which involves higher technical requirements. In China, TSI technology used in mid-to-low-end mass-produced vehicles typically includes turbocharging and fuel stratified injection. 2. TSI fuel direct injection technology achieves a perfect balance between engine power and fuel economy under the same displacement. It is one of the most mature and advanced fuel direct injection technologies in the automotive industry today, leading the development trend of gasoline engines.

6

4

Share

What does the car SYNC button mean?

The SYNC button in a car refers to the synchronization feature of a dual-zone automatic air conditioning system. When the button light is on, the temperature from the air vents on both sides of the car is the same and adjusts synchronously. This means that when you adjust the temperature on one side, both air vents will actually have the same temperature. When the air conditioning is turned on, simply setting different temperatures on both sides will automatically turn off the SYNC function. Below is related information about the car SYNC: 1. Dual-zone automatic air conditioning refers to a system with two temperature zones, allowing independent temperature adjustment for the left and right sides of the front cabin space. 2. Vehicles equipped with dual-zone automatic air conditioning can meet the different temperature requirements of passengers in two separate positions inside the car. The independent temperature zones allow for flexible adjustment and switching between different temperature differences.

20

1

Share

What is the Function of Central Locking?

Central locking, short for central control door lock, is an automotive accessory that allows doors to be locked and unlocked remotely without inserting a key into the lock cylinder. It consists of a door lock switch, an actuator, and a controller. Functions of Central Locking: Central Control: When the driver locks the door beside them, all other doors are simultaneously locked. The driver can unlock all doors at once using the door lock switch or open a specific door individually. Speed Control: When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. Individual Control: In addition to the driver's door, separate spring lock switches are installed on other doors, allowing independent control over the locking and unlocking of each door. Principle of Central Locking: A weak radio wave is emitted from the vicinity of the vehicle owner, received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the locking or unlocking action.

17

3

Share

What does the EPC light mean?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is checking the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC indicator light remains illuminated after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, and brake light defects. Below is a detailed explanation of the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with throttle valves. Additionally, dirt accumulation can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valve and other power system components can also trigger the EPC light. ECU control unit fault: This includes interference with the vehicle's computer signals or false alarms from the computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake wiring issues. Solutions for the EPC light illumination in vehicles: Troubleshoot the intake system, use fuel with the appropriate octane rating, clean the throttle valve, etc.

1

3

Share

What does 'Check Emission System' mean?

If the 'Check Emission System' warning appears on the car's dashboard, it indicates a possible fault in the exhaust pipe, which could be due to poor gas combustion. It may also alert if the three-way catalytic converter or oxygen sensors are dirty. It's best to have it inspected at a 4S shop. Below is more information about car exhaust pipes: 1. Composition of the exhaust pipe: A car's exhaust pipe consists of three sections: the front pipe, mid pipe, and tail pipe. The three-way catalytic converter is located in the front pipe, also known as the exhaust manifold, which can usually be seen by opening the engine hood. The three-way catalytic converter may fail after prolonged use, and if it does, it could cause the engine warning light to illuminate. 2. Function of the oxygen sensor: Most cars have two oxygen sensors, one located behind the exhaust manifold and the other behind the three-way catalytic converter. The oxygen sensors detect the oxygen content in the exhaust and feed this information back to the ECU.

5

3

Share

How to Deal with Yellowing Inside Car Headlights?

Can I drive on the highway with a tire pressure of 2.7?

What is the displacement of 280tsi?

What does the car SYNC button mean?

What is the Function of Central Locking?

What does the EPC light mean?

What does 'Check Emission System' mean?

Can Airbags Be Added to a Car?

Where is the frame number of Chaowei Fushida electric vehicle?

At What Age Can a Baby Use a Car Seat?

What is an airbag device?