How to Deal with Yellowing Car Roof Lining?

3 Answers
DePenelope
07/29/25 12:23pm
First, lay the seats flat and cover them with a towel or seat cover to prevent contamination from water or cleaning solution dripping from the roof. Fill a spray bottle with a diluted mixture of water and cleaning solution, then spray it onto the roof. After the cleaning solution slightly foams, gently scrub the roof with a soft brush.
Was this review help?
19
1
Share
LilaAnn
08/13/25 11:22pm
The ceiling of my old car also turned yellow, mainly due to prolonged exposure to sunlight and smoking inside the car. After trying several methods, I found that specialized interior cleaners, especially foam types, worked best. First, vacuum the ceiling thoroughly, spray the cleaner and wait for five minutes, then gently scrub in circular motions with a soft-bristle brush, and finally wipe twice with a damp towel. Be especially careful not to scrub too hard, as the ceiling fabric is very fragile. After treatment, it's recommended to check weekly and use a sunshade when parked outside. For areas severely oxidized, partial replacement of the ceiling fabric might be necessary. Regular maintenance shouldn't be overlooked, such as avoiding smoking in the car and vacuuming periodically.
Was this review help?
16
4
Share
Expand All
PatrickRose
10/09/25 3:29am
I've got experience with yellowing car roofs – just dealt with it recently. First, you need to identify the cause: is it cigarette stains, sun damage, or mold? In most cases, an all-purpose foam cleaner (the kind that costs 20-30 yuan at supermarkets) will do the trick. Remember to keep the car ventilated during cleaning and don't overspray the cleaner. When I handled mine, I found that gently scrubbing the yellowed areas with a magic eraser worked particularly well, but be careful not to make the sponge too wet. If DIY doesn't work, spending about 200 yuan for an interior detailing at a car beauty shop is a good option – they have professional steam equipment for better results. Finally, I'd recommend getting a dashboard sunshade mat to significantly reduce sun damage.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What is the method for matching a Toyota Corolla remote control?

To match the remote control, first open the main door and open and close the other doors five times. Insert the key into the ignition switch and turn it to the position where the dashboard lights up. At this point, the anti-theft light will illuminate. Press any button on the remote to make the light go off. Then press any button on the remote again to make the light come back on, and the remote control will be successfully matched.
14
1
Share

What Causes Transmission Whine?

Transmission whine occurs due to excessive meshing clearance in the transmission. When the driving gear rotates and impacts the driven gear, it produces a knocking sound, which typically worsens as the transmission temperature rises. Here is relevant information: 1. Transmission: A transmission is a device that changes speed ratios and motion direction. Used in automobiles, tractors, ships, machine tools, and various machinery, it alters the torque, speed, and motion direction transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gears. 2. Function: The main functions of a transmission are to change the vehicle's driving force and speed (shifting) while maintaining constant engine speed and torque; to allow the vehicle to move in reverse (reversing); and to enable the engine to idle without stalling (neutral).
14
4
Share

What are the causes of airbag control unit failure?

Safety airbag warning light illumination may indicate damage to one of its components. Below are relevant details: 1. Overview: The airbag system is a passive safety protection system that works in conjunction with seat belts to provide effective collision protection for occupants. During vehicle collisions, automotive airbags can reduce head injury rates by 25% and facial injury rates by approximately 80%. 2. Composition: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is typically mounted on the dashboard.
13
4
Share

How to Find Reference Points for Motorcone Slalom?

After entering the test area, when passing the first cone, slowly move forward. When your shoulder or the vehicle pillar aligns with the cone, turn the steering wheel fully to the left; After bypassing the first cone, straighten the wheels when they are about to touch the road boundary line, and gradually adjust the direction to the right to prevent the front wheels from crossing the line; Continue observing the position of the second cone relative to the vehicle body. When your shoulder or the vehicle pillar aligns with the cone, turn the steering wheel fully to the right; After exiting the second cone, repeat the steps of straightening the direction before entering the next cone, and so on.
3
3
Share

How to Deal with Uneven Car Paint?

When the car paint appears uneven after using a touch-up pen, it is necessary to inspect and polish the paint surface. Here is the relevant information: 1. Specific method: Due to uneven hand pressure, the paint surface may become uneven or slightly inconsistent in color. Do not rush to address it immediately; first remove the tape. After 2 to 3 days, gently wipe the area with a wet chamois or car wash sponge, then apply polishing wax and lightly polish until the paint surface becomes smooth again. 2. Touch-up paint: The paint used for touch-ups is repair paint, which is fundamentally different from the original factory paint. Additionally, due to the influence of the spraying process, there will be certain differences in both the thickness and uniformity of the paint, leading to the most direct effect—color difference.
18
5
Share

What Causes the Clicking Noise When a Lexus Goes Over Bumpy Roads?

The causes of the clicking noise when a Lexus goes over bumpy roads are as follows: 1. Plastic Components: The source of the noise is the dashboard. While this cannot be considered a normal phenomenon, it is a relatively common issue found in many vehicle models. Such noises typically occur in areas with a high concentration of plastic parts, such as the instrument panel or door interior panels. Timely identification and replacement can resolve the issue. 2. Friction Due to Compression: Mutual compression can cause friction noise. Generally, this type of noise may vary with seasonal and environmental temperature changes. Although it does not affect the vehicle's driving performance, it is necessary to disassemble and inspect the noisy area to check for poor assembly or loose components that may need re-tightening.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.