How to Deal with Wiper Blades Not Cleaning Properly?

What does TC mean in a car?

When the "TC" indicator light on the car dashboard flashes, it means the "Traction Control System" is active. "TC" is the abbreviation for Traction-Control-System, which refers to the traction control system or anti-slip regulation system. Here are some details about the traction control system: 1. The traction control system relies on the electronic sensors of the ABS anti-lock braking system. When it detects that the speed of the driven wheel is lower than that of the driving wheel, indicating wheel slip, it sends a feedback signal to the car's system. The car system then adjusts the ignition timing, reduces the throttle opening, decreases the throttle, downshifts, or applies the brakes to prevent wheel slip. 2. The traction control system can transfer power to the road surface to avoid slipping, while also allowing the car to follow the driver's intentions, thereby improving driving safety.

4

Share

What is the reason for the abnormal noise when shifting to D gear and stepping on the brake?

The reason for the abnormal noise when shifting to D gear and stepping on the brake is due to severe wear of the ball joint under the gear, which requires replacing the gear oil or the ball joint. The ball joint, also known as the universal joint, refers to a mechanical structure that uses a spherical connection to transmit power between different axes. The causes of ball joint wear are as follows: 1. Poor performance of the shift fork shaft and too small clutch travel: Severe wear requires checking the corresponding movement position of the ball joint. 2. Excessive viscosity of the transmission oil and excessive wear of the synchronizer. 3. Poor performance of the clutch pressure plate, excessive wear of the synchronizer, and reduced performance of the clutch oil due to temperature effects.

11

4

Share

Why is the Buick Verano being recalled?

Buick Verano is being recalled due to the following reason: The front suspension equipped on the vehicle may deform or disengage when subjected to significant external force impact, which could potentially lead to loss of vehicle control under extreme circumstances, posing a safety hazard. Additional information about automotive recalls is as follows: 1. An automotive recall refers to the process where the manufacturer of defective automotive products eliminates the defects in their products in accordance with legal requirements and procedures. This includes the manufacturer effectively notifying relevant parties such as dealers, repairers, and vehicle owners about the specifics of the defects and the methods to eliminate them. The manufacturer then organizes dealers, repairers, etc., to eliminate the defects in their automotive products through specific measures such as repairs, replacements, or returns. 2. Automotive recalls have become a mature mechanism for addressing defects in automotive products, making significant contributions to safeguarding public safety, property security, and the healthy development of the automotive industry in various countries.

9

5

Share

Why does the Audi Q3 shake and report misfire?

Audi Q3 shaking and reporting misfire reasons are as follows: Spark plug aging: The spark plugs may have aged due to prolonged use, causing the electrode gap to become larger and wider, resulting in insufficient ignition energy and poor gasoline atomization. Additionally, many modern cars have three-cylinder or four-cylinder engines, each with a spark plug in every cylinder. These spark plugs can also develop larger gaps, leading to power differences between cylinders and causing vehicle shaking. Intake manifold carbon buildup: The engine intake manifold and valves can accumulate excessive carbon deposits, possibly due to a dirty throttle body or excessive carbon buildup in the fuel injectors and intake passages. During cold starts, carbon deposits can absorb some fuel. If the fuel does not completely enter the cylinder for combustion, it can cause unstable idling. This may result in carbon deposits absorbing some gasoline during cold starts, leading to excessively low mixture concentration in the engine cylinders, causing engine shaking and difficulty starting.

17

3

Share

Why does the engine get very hot after driving for a while?

The reasons why the engine gets very hot after driving for a while are as follows: 1. Severe shortage of coolant: If the coolant is not checked and replenished in time, it can easily lead to engine overheating. 2. Water pump failure: After the water pump fails, the water that conducts heat for the engine cannot circulate and renew in time. After driving for a while, the water temperature will rise rapidly, and the water temperature warning light on the dashboard will also illuminate. 3. Cooling fan failure: The cooling fan is damaged or the fan does not work due to a short circuit in the wiring, or the cooling fan rotates slowly, preventing the engine's heat from dissipating. This causes the engine temperature to rise, and you can naturally feel a significant amount of heat when opening the engine compartment.

2

Share

Is a 5,000-kilometer maintenance mandatory for cars?

Car maintenance at 5,000 kilometers is essential. The maintenance intervals for engine oil and oil filters: approximately every 5,000 kilometers. Below are relevant details about car maintenance: 1. Use lubricating oil of appropriate quality grade: For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. 2. Regularly change the engine oil and filter: The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions. 3. Maintain good crankcase ventilation: Most gasoline engines now come equipped with a PCV valve to facilitate engine ventilation. However, contaminants from blow-by gases can accumulate around the PCV valve, potentially causing it to clog.

2

4

Share

How to Deal with Wiper Blades Not Cleaning Properly?

What does TC mean in a car?

What is the reason for the abnormal noise when shifting to D gear and stepping on the brake?

Why is the Buick Verano being recalled?

Why does the Audi Q3 shake and report misfire?

Why does the engine get very hot after driving for a while?

Is a 5,000-kilometer maintenance mandatory for cars?

Which MINI model comes with a convertible top?

What Causes the Chassis Noise in Chery Tiggo 3?

What Documents Are Required for New Vehicle Annual Inspection?

How to Identify the Quality of Brake Fluid?