How to Deal with Windshield Scratches?

1 Answers
Levi
07/29/25 4:16pm
Methods for repairing car glass scratches are as follows: 1. Polishing Removal: Small and shallow scratches can be removed by polishing. However, it's best if the scratches are not within the driver's line of sight, as polishing causes some glass loss. Large areas may affect visibility, so for safety reasons, it is recommended to replace the glass directly. 2. Glass Scratch Repair Agent: Slowly apply the gel along the glass crack, being patient to avoid unevenness, which is especially noticeable under sunlight. Note that glass repair agents are only suitable for minor scratches. For more severe cases, it's advisable to visit a professional auto beauty shop or 4S store for repair. 3. Professional Repair Shop: For deeper glass scratches, it is recommended to choose a reliable and reputable professional repair shop for restoration. 4. Toothpaste for Scratch Removal: Apply a small amount of toothpaste to the scratched area, rub gently with a soft cloth, and then rinse with water. Toothpaste can help repair fine scratches and also prevent rusting.
Was this review help?
1
3
Share
More Forum Discussions

Where is the front tow hook on the Audi Q5?

The tow hook of the Audi Q5 is located at the lower part of the rear bumper, near the exhaust pipe. Here are some details about the tow hook: 1. The tow hook, also known as a tow ball, ball-type rear tow hook, or tow bar, is part of a comprehensive towing system. It consists of three main components: a fixed bracket, a ball body, and a wiring harness (power control unit). 2. In emergency situations, such as engine failure or when the vehicle is stuck in mud and cannot move, the owner may need to rely on the power of another vehicle to assist in moving the car. In such cases, a tow hook is often used to resolve the issue.
17
0
Share

What Type of Engine Oil is Best for Santana?

The new Santana is equipped with a 1.5L naturally aspirated engine across all models. For this vehicle, a 20-viscosity full synthetic engine oil is suitable. Below are some key points to consider when selecting engine oil: 1. When choosing engine oil, it is essential to select a viscosity that is appropriate for the car's engine. The oil viscosity should neither be too high nor too low. 2. If the viscosity is too low, the oil cannot form a stable oil film on the surfaces of various engine components, which will accelerate engine wear. 3. If the viscosity is too high, it will increase the resistance during engine operation, leading to reduced engine power and increased fuel consumption.
20
5
Share

Where is the computer interface of the old Bora?

The OBD interface of the old Bora is located near the position below the radio. Here is some information about the Bora: 1. The new Bora is equipped with two engines, one is a 1.5L naturally aspirated engine, and the other is a 1.4L turbocharged engine. 2. 1.5L naturally aspirated engine: The maximum power of this engine is 83kW, the maximum torque is 145 Nm, the maximum power speed is 6000 rpm, and the maximum torque speed is 3900 rpm. 3. 1.4L turbocharged engine: The maximum power of this engine is 110kW, the maximum torque is 250 Nm, the maximum power speed is 5000 to 6000 rpm, and the maximum torque speed is 1750 to 3000 rpm.
12
3
Share

What is the difference between 1.5l and 1.5t?

1.5l and 1.5t differ in their engines: a 1.5l car has a naturally aspirated engine, while a 1.5t car has a turbocharged engine. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work. The engine consists of: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the car's three filters; 6. Maintaining a reasonable engine speed.
14
5
Share

What are the solutions for excessive oil consumption in Audi A6L?

The solutions for excessive oil consumption in Audi A6L are as follows: 1. Measure and inspect the crankcase vacuum pressure of the engine. If abnormal, replace the crankcase ventilation valve. 2. Check for carbon deposits on the engine valves and piston tops. If there is significant carbon buildup, cleaning is necessary. 3. Inspect the engine cooling system's heat dissipation, specifically the cleanliness of the radiator condenser, and clean it promptly. 4. When selecting engine oil during vehicle maintenance, choose the oil grade specified by the manufacturer, as the oil's high-temperature resistance and viscosity can affect consumption. 5. If the vehicle exceeds 0.5L per 1000 kilometers, the engine needs to be disassembled for repair. During the repair, replace the improved piston ring kit and inspect and repair the crankcase ventilation valve, carbon deposits, cooling system, etc.
6
5
Share

Is Borgward a Domestic or Joint Venture Brand?

Borgward is a joint venture brand, and its models include: Borgward BX7, Borgward BX7T, Borgward BX5, Borgward BX6, Borgward BXi7, etc. Taking the 2020 Borgward BX5 as an example, its body dimensions are: 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm, a fuel tank capacity of 60L, and a curb weight of 1525kg. The 2020 Borgward BX5 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 6-speed automatic transmission.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.